TX 1972 SWB 2wd rolling chassis AUstin Texas $300 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**WIDESIDE72** · 09-09-2009, 09:19 PM

Not much to tell... No driveshaft or e brake cables, missing caliper on one side, I forget which. Unknown gear ratio/ posi/ non posi in rear. No steering box, but I have a power box for $50 extra. Cool 80's "Hurricane" mags included. Not bent or tweaked in any way that I can tell.

**WIDESIDE72** · 09-09-2009, 09:21 PM

One tie rod end is bent from wheel getting hung up when moving the chassis (OOPS) This is a disc brake 5 lug roller, y'all!

**WIDESIDE72** · 09-09-2009, 09:22 PM

Panhard bar not shown in photos, but it has been reinstalled.

BB72CHEVKT · 09-09-2009, 09:27 PM

How are shock mounts and cab mounts? You ever head to the Tyler area? If I pay you how long do I have to get there?

**WIDESIDE72** · 09-09-2009, 09:48 PM

I will double check the mounts before swearing to it. Right now, I am trying to scrape money together to replace the dead 350 in my truck, so I don't have any way to deliver. If you wan it, it can sit were it is indefinitely. I'm not going anywhere!

BB72CHEVKT · 09-10-2009, 09:41 AM

Quote:

Originally Posted by WIDESIDE72

I will double check the mounts before swearing to it. Right now, I am trying to scrape money together to replace the dead 350 in my truck, so I don't have any way to deliver. If you wan it, it can sit were it is indefinitely. I'm not going anywhere!

Thanks. After thinking about it further I better deal with the 3 trucks I have now. Here is a bump for you.

**WIDESIDE72** · 10-05-2009, 09:17 PM

Ttt

**Clyde65** · 10-07-2009, 12:24 PM

Before you sell it, could you get cardboard paterns for me for the cut out where the motor mounts are? both sides?

**WIDESIDE72** · 10-11-2009, 08:43 PM

Sale pending with hotrod 80

**WIDESIDE72** · 10-11-2009, 08:44 PM

I do have a bare swb frame for sale. It is at my place in Leander. I also have a complete 72 1/2 ton disc brake front suspension and 5 lug rear axle (ratio not known, but it came out of a sb v8 truck) at my brother's place nw of Ft Worth. I would let it go for the same $300

**WIDESIDE72** · 10-11-2009, 08:45 PM

I can have the frame taken to NW of DFW area or suspension pieces brought to Austin area as well.

**WIDESIDE72** · 10-14-2009, 09:03 AM

Chassis sold to Hotrod 80. Pickup arrangements pending

09-09-2009, 09:19 PM	#1
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	1972 SWB 2wd rolling chassis AUstin Texas $300 Not much to tell... No driveshaft or e brake cables, missing caliper on one side, I forget which. Unknown gear ratio/ posi/ non posi in rear. No steering box, but I have a power box for $50 extra. Cool 80's "Hurricane" mags included. Not bent or tweaked in any way that I can tell. Attached Images

09-09-2009, 09:21 PM	#2
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 1972 SWB 2wd rolling chassis AUstin Texas $300 One tie rod end is bent from wheel getting hung up when moving the chassis (OOPS) This is a disc brake 5 lug roller, y'all!

09-09-2009, 09:22 PM	#3
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 1972 SWB 2wd rolling chassis AUstin Texas $300 Panhard bar not shown in photos, but it has been reinstalled.

09-09-2009, 09:27 PM	#4
BB72CHEVKT Junior Member Join Date: Mar 2007 Location: Hideaway, TX Posts: 4,950	Re: 1972 SWB 2wd rolling chassis AUstin Texas $300 How are shock mounts and cab mounts? You ever head to the Tyler area? If I pay you how long do I have to get there? __________________ 71 Suburban 350/700R4 Project Trixie 72 CHEVY,Highlander,SWB,396,T400 Last edited by BB72CHEVKT; 09-09-2009 at 09:29 PM.

09-09-2009, 09:48 PM	#5
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 1972 SWB 2wd rolling chassis AUstin Texas $300 I will double check the mounts before swearing to it. Right now, I am trying to scrape money together to replace the dead 350 in my truck, so I don't have any way to deliver. If you wan it, it can sit were it is indefinitely. I'm not going anywhere!

10-05-2009, 09:17 PM	#7
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 1972 SWB 2wd rolling chassis AUstin Texas $300 Ttt

10-07-2009, 12:24 PM	#8
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,547	Re: 1972 SWB 2wd rolling chassis AUstin Texas $300 Before you sell it, could you get cardboard paterns for me for the cut out where the motor mounts are? both sides?

10-11-2009, 08:43 PM	#9
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 1972 SWB 2wd rolling chassis AUstin Texas $300 Sale pending with hotrod 80

10-11-2009, 08:44 PM	#10
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 1972 SWB 2wd rolling chassis AUstin Texas $300 I do have a bare swb frame for sale. It is at my place in Leander. I also have a complete 72 1/2 ton disc brake front suspension and 5 lug rear axle (ratio not known, but it came out of a sb v8 truck) at my brother's place nw of Ft Worth. I would let it go for the same $300

10-11-2009, 08:45 PM	#11
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 1972 SWB 2wd rolling chassis AUstin Texas $300 I can have the frame taken to NW of DFW area or suspension pieces brought to Austin area as well.

10-14-2009, 09:03 AM	#12
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 1972 SWB 2wd rolling chassis AUstin Texas $300 Chassis sold to Hotrod 80. Pickup arrangements pending



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.