MN Parting:72 gmc, 70 custom. Act fast... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**too much stuff** · 09-17-2009, 08:33 PM

Not much left of either, but these will be crushed on sat. or monday. If you see anything, Ask and i will price it. I am keeping a few parts for myself.
Chrome soft-ray wings driver condition: $60 plus ship
Gear selector. $20 plus ship
72 window regulators if they work good: $30 plus ship.
Gauge cluster, $25 plus ship
Local pickup is fine also. Eric

**too much stuff** · 09-17-2009, 08:37 PM

More pics...
Clutch block offs:$10 plus ship
Steering column $50 plus ship. (without wheel)
Trades or offers considered. Eric

**oldgold70c10** · 09-17-2009, 09:12 PM

What do you want for the power brake push rod & bracket that goes between the booster & firewall on the 72?
Also, is that a factory antenna on the 72?

**too much stuff** · 09-17-2009, 09:35 PM

Quote:

Originally Posted by oldgold70c10

What do you want for the power brake push rod & bracket that goes between the booster & firewall on the 72?
Also, is that a factory antenna on the 72?

$20 plus ship sound fair?
I am not sure on the antenna. It appears correct and i have seen that spring style on quite a few. I will get it home tomorrow and look it over better. Eric

**oldgold70c10** · 09-17-2009, 09:40 PM

sounds fair let me know about the antenna+ship to 73061

**too much stuff** · 09-18-2009, 01:53 PM

These are home and getting parted right now. Probably crush in the AM...

JimmyFloyd · 09-18-2009, 04:52 PM

How much for all the wiring harnesses? I could use some extra plugs and such for mine.

VA72C10 · 09-18-2009, 05:01 PM

I don't want/need any of the parts but if that front and/or rear stainless window trim is decent, it would be worth saving.....and of course the sliding rear window...

**too much stuff** · 09-18-2009, 05:32 PM

Quote:

Originally Posted by JimmyFloyd

How much for all the wiring harnesses? I could use some extra plugs and such for mine.

How about $20 plus ship for what ever i can get in the cab and under the hood. I know the cargo light wiring is all cut. I don't know the condition of the rest. I will throw in the fuse block also if it is still there. Eric

gcburdic · 09-18-2009, 06:02 PM

you probably already know this, but if the front bumper brackets and the grill support and latch are any good, someone could always use those!...I not sayin'...I'm just sayin'

**too much stuff** · 09-18-2009, 07:03 PM

Getting close to the end. I will post some pics later of the parts asked for.
Oldgold70, the antenna is junk...

jaber · 09-18-2009, 07:35 PM

good

Hottrucks · 09-18-2009, 07:36 PM

I need the patch for the clutch peddle off the 72..the one that fills the hole where the linkage goes though the cab on the fire wall.... hope I explained that well

and I'll do the booster set up if he doesn't

thanx
Jeff

71 super · 09-18-2009, 07:48 PM

Eric I will have to pass, I got front and rear last week. Thanks for letting me know. Harold

**1967chevyswb** · 09-18-2009, 08:17 PM

Hello, Iam interested in the heater controls. The ones in the first truck pictured. How much and shipping to 67401? Thanks Roy

**oldgold70c10** · 09-18-2009, 08:36 PM

OK, I will take just the brake parts then. Please PM me with shipping and payment details.
Thanks!!!

**too much stuff** · 09-18-2009, 08:41 PM

I am out of daylight. I will get pics up shortly with shipped prices.
Gotta enjoy a quick cold one first...

HeavyD · 09-18-2009, 09:00 PM

Eric is the stainless window trim in good shape?

**too much stuff** · 09-18-2009, 10:34 PM

Any shipping out of the US will be higher than quoted.
Oldgold70, How about $27 shipped.
Jimmyfloyd, also $27 shipped. Most of the plug ins are still intact.
jaber ????
Hottrucks, $13 shipped.
67chevy, that heater control was junk. I may have another here i can check on if you like.
Dalton, the windshield trim was very nice so i kept it. If you need some, let me know. I can get some put away for you.
I think that covers everything. Eric

JimmyFloyd · 09-18-2009, 11:42 PM

awesome. Send me the payment info.

**71swb4x4** · 09-18-2009, 11:55 PM

Is the front pass fender on the GMC good? I assume it's bad, since it looks like you didn't pull it, but just thought I would ask.

70LonghornCST · 09-18-2009, 11:57 PM

I noticed that both trucks had front windshield molding. HeavyD asked first about some. I too would like to know if they're in good shape. Shipping to 95326

**too much stuff** · 09-19-2009, 12:03 AM

71swb4x4. funny thing, both pics that show the pass fender don't show the big rust hole at the back edge. It is hidden in both pics. The drivers fender was better, and that too has rust holes. Gotta love the salt belt...
Richard, i saved the better one but i have some others. Mostly driver quality. How nice are you needing? Eric

**71swb4x4** · 09-19-2009, 12:08 AM

Eric, is the front cup on that fender good? That's the only bad part on my fender. If it's good and you have time to cut that fender apart, let me know.

**too much stuff** · 09-19-2009, 12:11 AM

I think it had some pinholes under the battery, but i will look again in the am...

09-17-2009, 08:33 PM	#1
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,854	Parting:72 gmc, 70 custom. Act fast... Not much left of either, but these will be crushed on sat. or monday. If you see anything, Ask and i will price it. I am keeping a few parts for myself. Chrome soft-ray wings driver condition: $60 plus ship Gear selector. $20 plus ship 72 window regulators if they work good: $30 plus ship. Gauge cluster, $25 plus ship Local pickup is fine also. Eric Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

09-17-2009, 08:37 PM	#2
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,854	Re: Parting:72 gmc, 70 custom. Act fast... More pics... Clutch block offs:$10 plus ship Steering column $50 plus ship. (without wheel) Trades or offers considered. Eric Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

09-17-2009, 09:12 PM	#3
oldgold70c10 Who's got steelies? Join Date: Feb 2006 Location: Morrison, Oklahoma Posts: 1,025	Re: Parting:72 gmc, 70 custom. Act fast... What do you want for the power brake push rod & bracket that goes between the booster & firewall on the 72? Also, is that a factory antenna on the 72? __________________ 1969 C10 LWB W/ 250 I6 & 3spd 1970 C10 with '67 small window cab, 68 front end, blue; 305/TH350, 3.08 limited slip rear end, manual brakes, power steering; & 4-wheel drums-My daily driver. 1975 Chevelle Malibu Classic Coupe 350/th350 mint green 1970 C20 Suburban 350/700R4 4.10 gearing green & white 1978 Big 10 Silverado 350/th350, working ac, 2 tone blue-My summer daily driver 1983 GMC 1500 Sierra 305/SM465 2.73 rear end How to add a trip odometer to your 67-72 stock speedometer How to rebuild your Q-Jet My Truck Page My Youtube Channel Last edited by oldgold70c10; 09-17-2009 at 09:15 PM.

09-17-2009, 09:40 PM	#5
oldgold70c10 Who's got steelies? Join Date: Feb 2006 Location: Morrison, Oklahoma Posts: 1,025	Re: Parting:72 gmc, 70 custom. Act fast... sounds fair let me know about the antenna+ship to 73061 __________________ 1969 C10 LWB W/ 250 I6 & 3spd 1970 C10 with '67 small window cab, 68 front end, blue; 305/TH350, 3.08 limited slip rear end, manual brakes, power steering; & 4-wheel drums-My daily driver. 1975 Chevelle Malibu Classic Coupe 350/th350 mint green 1970 C20 Suburban 350/700R4 4.10 gearing green & white 1978 Big 10 Silverado 350/th350, working ac, 2 tone blue-My summer daily driver 1983 GMC 1500 Sierra 305/SM465 2.73 rear end How to add a trip odometer to your 67-72 stock speedometer How to rebuild your Q-Jet My Truck Page My Youtube Channel

09-18-2009, 01:53 PM	#6
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,854	Re: Parting:72 gmc, 70 custom. Act fast... These are home and getting parted right now. Probably crush in the AM... __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

09-18-2009, 04:52 PM	#7
JimmyFloyd Registered User Join Date: Apr 2009 Location: Rochester, NY Posts: 1,458	Re: Parting:72 gmc, 70 custom. Act fast... How much for all the wiring harnesses? I could use some extra plugs and such for mine. __________________ 1970 Blazer 350/SM465/205 SOLD! \| 1998 Z3

09-18-2009, 05:01 PM	#8
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Parting:72 gmc, 70 custom. Act fast... I don't want/need any of the parts but if that front and/or rear stainless window trim is decent, it would be worth saving.....and of course the sliding rear window... __________________ Looking for a 67-72 swb or blazer project in or around VA.

09-18-2009, 06:02 PM	#10
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,299	Re: Parting:72 gmc, 70 custom. Act fast... you probably already know this, but if the front bumper brackets and the grill support and latch are any good, someone could always use those!...I not sayin'...I'm just sayin' __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present

09-18-2009, 07:03 PM	#11
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,854	Re: Parting:72 gmc, 70 custom. Act fast... Getting close to the end. I will post some pics later of the parts asked for. Oldgold70, the antenna is junk... __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

09-18-2009, 07:35 PM	#12
jaber Registered User Join Date: Aug 2008 Location: Doha, Qatar Posts: 21	Re: Parting:72 gmc, 70 custom. Act fast... good

09-18-2009, 07:36 PM	#13
Hottrucks Redefining LowBudget Join Date: Mar 2009 Location: lebanon Cow Hampshire Posts: 4,538	Re: Parting:72 gmc, 70 custom. Act fast... I need the patch for the clutch peddle off the 72..the one that fills the hole where the linkage goes though the cab on the fire wall.... hope I explained that well and I'll do the booster set up if he doesn't thanx Jeff __________________ 1970 C10 CST fleetside 472 ....big dreams little cash... http://67-72chevytrucks.com/vboard/s...d.php?t=335721 SunShine Syndicate.. Mikes Sandwich Fair Run OCT 8th 2011 http://www.thesandwichfair.com/html/...auto_show.html Last edited by Hottrucks; 09-18-2009 at 07:37 PM.

09-18-2009, 07:48 PM	#14
71 super Registered User Join Date: Sep 2005 Location: Canton North carolina Posts: 3,080	Re: Parting:72 gmc, 70 custom. Act fast... Eric I will have to pass, I got front and rear last week. Thanks for letting me know. Harold __________________ 67 blue step side- bb 68 gold and white swb cst anniversary 68 custom swb hot rod Ls swap 69 swb cst 6 cylinder/ overdrive 69 black/black cst bb swb 70 orange and white cst Canada built truck swb bb 71 black and white super swb bb 71 red and white super swb 72 green and white super swb 4x4 62 nova wagon 400 series Ls swapped 68 Camaro 327/4 speed- 1 owner, original paint 66 Volkswagen bettle 69 auto stick Volkswagen Beetle

09-18-2009, 08:17 PM	#15
1967chevyswb Registered User Join Date: May 2009 Location: Salina,Kansas Posts: 372	Re: Parting:72 gmc, 70 custom. Act fast... Hello, Iam interested in the heater controls. The ones in the first truck pictured. How much and shipping to 67401? Thanks Roy

09-18-2009, 08:36 PM	#16
oldgold70c10 Who's got steelies? Join Date: Feb 2006 Location: Morrison, Oklahoma Posts: 1,025	Re: Parting:72 gmc, 70 custom. Act fast... OK, I will take just the brake parts then. Please PM me with shipping and payment details. Thanks!!! __________________ 1969 C10 LWB W/ 250 I6 & 3spd 1970 C10 with '67 small window cab, 68 front end, blue; 305/TH350, 3.08 limited slip rear end, manual brakes, power steering; & 4-wheel drums-My daily driver. 1975 Chevelle Malibu Classic Coupe 350/th350 mint green 1970 C20 Suburban 350/700R4 4.10 gearing green & white 1978 Big 10 Silverado 350/th350, working ac, 2 tone blue-My summer daily driver 1983 GMC 1500 Sierra 305/SM465 2.73 rear end How to add a trip odometer to your 67-72 stock speedometer How to rebuild your Q-Jet My Truck Page My Youtube Channel

09-18-2009, 08:41 PM	#17
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,854	Re: Parting:72 gmc, 70 custom. Act fast... I am out of daylight. I will get pics up shortly with shipped prices. Gotta enjoy a quick cold one first... __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto



Register or Log In To remove these advertisements.

09-18-2009, 09:00 PM	#18
HeavyD Senior Member Join Date: Sep 2004 Location: Wakaw, Sask, Canada Posts: 3,180	Re: Parting:72 gmc, 70 custom. Act fast... Eric is the stainless window trim in good shape? __________________ "You can take the man out of PA, but you can't take PA out of the man"

09-18-2009, 10:34 PM	#19
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,854	Re: Parting:72 gmc, 70 custom. Act fast... Any shipping out of the US will be higher than quoted. Oldgold70, How about $27 shipped. Jimmyfloyd, also $27 shipped. Most of the plug ins are still intact. jaber ???? Hottrucks, $13 shipped. 67chevy, that heater control was junk. I may have another here i can check on if you like. Dalton, the windshield trim was very nice so i kept it. If you need some, let me know. I can get some put away for you. I think that covers everything. Eric Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

09-18-2009, 11:42 PM	#20
JimmyFloyd Registered User Join Date: Apr 2009 Location: Rochester, NY Posts: 1,458	Re: Parting:72 gmc, 70 custom. Act fast... awesome. Send me the payment info. __________________ 1970 Blazer 350/SM465/205 SOLD! \| 1998 Z3

09-18-2009, 11:55 PM	#21
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,499	Re: Parting:72 gmc, 70 custom. Act fast... Is the front pass fender on the GMC good? I assume it's bad, since it looks like you didn't pull it, but just thought I would ask. __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

09-18-2009, 11:57 PM	#22
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: Parting:72 gmc, 70 custom. Act fast... I noticed that both trucks had front windshield molding. HeavyD asked first about some. I too would like to know if they're in good shape. Shipping to 95326 __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal

09-19-2009, 12:03 AM	#23
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,854	Re: Parting:72 gmc, 70 custom. Act fast... 71swb4x4. funny thing, both pics that show the pass fender don't show the big rust hole at the back edge. It is hidden in both pics. The drivers fender was better, and that too has rust holes. Gotta love the salt belt... Richard, i saved the better one but i have some others. Mostly driver quality. How nice are you needing? Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

09-19-2009, 12:08 AM	#24
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,499	Re: Parting:72 gmc, 70 custom. Act fast... Eric, is the front cup on that fender good? That's the only bad part on my fender. If it's good and you have time to cut that fender apart, let me know. __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

09-19-2009, 12:11 AM	#25
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,854	Re: Parting:72 gmc, 70 custom. Act fast... I think it had some pinholes under the battery, but i will look again in the am... __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

Register or Log In To remove these advertisements.