Tansfer case spacer?? Basic question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

84 400 · 09-21-2009, 06:23 PM

Well lifted my 77 roughly 4-5 inch. It goes okay but I think it has some vibes. I have seen alot of people taking the inch or so spacers that are on the T case crossmeber bolts and putting them between the frame and cross member. Will this put added stress on my motor mounts??? Could this cause cracking around the holes in the frame? I am not happy about the idea of lowering the T case and loosing ground clearance but I want to get this rig going and get some wheeling in before the snow flies.

Thanks and I know it is kinda a lame question

09-21-2009, 06:23 PM	#1
84 400 Sb 400 club Join Date: Nov 2005 Location: NH / MA Posts: 2,746	Tansfer case spacer?? Basic question Well lifted my 77 roughly 4-5 inch. It goes okay but I think it has some vibes. I have seen alot of people taking the inch or so spacers that are on the T case crossmeber bolts and putting them between the frame and cross member. Will this put added stress on my motor mounts??? Could this cause cracking around the holes in the frame? I am not happy about the idea of lowering the T case and loosing ground clearance but I want to get this rig going and get some wheeling in before the snow flies. Thanks and I know it is kinda a lame question __________________ 1984 chevy c10, built 400sb,.(SOLD) 77 K10 Project / daily driver "The Grinch" http://67-72chevytrucks.com/vboard/s...d.php?t=318363 1956 Willys Wagon (327 chevy) Project (Now Buick 225) 1980 Corvette L-48 4 speed 1992 Mustang GT built 5.0 5 speed 1985 C10 LWB Sold 1982 K10 SWB plow truck Parted out 1986 D30 M1028 fire brush truck Parted out



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.