CO WTB: 88-98 rear end with 3.42 ratio (RPO GU6) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

glock35ipsc · 09-23-2009, 12:58 PM

As title says, looking for an 88-98 rear end with 3.42 ratio (RPO GU6) from a 2wd. Hopefully close to Colorado, Wyoming, maybe western Kansas and Nebraska, northern New Mexico, etc......

3quartertime · 09-23-2009, 04:07 PM

Good luck!

I searched for weeks to find a rear end for my 88. Finally found a front and rear set in 3.73 that had been rebuilt and swapped the whole deal.

glock35ipsc · 09-23-2009, 04:45 PM

There are dozens of them around here, I just don't want to pay bone yard prices. There is one about 15 minutes away for $275, that's not too bad. I just found one on CL in Aurora for $175, so I may go get that one this weekend if it's still there. But I'll keep looking until I have one in my possession!

**lolife99** · 09-24-2009, 06:16 AM

Hey Glock,... any reason why you want the 88-up rearend? Any advantage?

glock35ipsc · 09-24-2009, 09:38 AM

The width.

One thing I have always disliked about the era trucks is that the rear track width is a little narrower than the front, it looks off and I think it effects the handling. The 88-98 are wider and look like they were meant to be under our trucks. Take a look at nlped's truck, he has one of these rears under his. It looks more "correct" to me.

STOCKISH · 10-05-2009, 01:14 PM

Bump for ya, I would like to switch over to a 88-98 rear one of these days as well.

glock35ipsc · 10-05-2009, 01:24 PM

Oops, I forgot about this. I did get one last week and have it installed.

09-23-2009, 12:58 PM	#1
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	WTB: 88-98 rear end with 3.42 ratio (RPO GU6) As title says, looking for an 88-98 rear end with 3.42 ratio (RPO GU6) from a 2wd. Hopefully close to Colorado, Wyoming, maybe western Kansas and Nebraska, northern New Mexico, etc...... __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

09-23-2009, 04:07 PM	#2
3quartertime My Mistress the Sea Join Date: Feb 2005 Location: Bradenton, FL. Posts: 412	Re: WTB: 88-98 rear end with 3.42 ratio (RPO GU6) Good luck! I searched for weeks to find a rear end for my 88. Finally found a front and rear set in 3.73 that had been rebuilt and swapped the whole deal. __________________ *,,,they'd look alot better as beer cans...* '71 K20 350/350 Rusty but trusty... gone '70 C20... gone '88 K1500... gone '90 C1500... gone '91 C2500... gone '95 C3500 6.5L Dually love this one!...

09-23-2009, 04:45 PM	#3
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Re: WTB: 88-98 rear end with 3.42 ratio (RPO GU6) There are dozens of them around here, I just don't want to pay bone yard prices. There is one about 15 minutes away for $275, that's not too bad. I just found one on CL in Aurora for $175, so I may go get that one this weekend if it's still there. But I'll keep looking until I have one in my possession! __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

09-24-2009, 06:16 AM	#4
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: WTB: 88-98 rear end with 3.42 ratio (RPO GU6) Hey Glock,... any reason why you want the 88-up rearend? Any advantage? __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

09-24-2009, 09:38 AM	#5
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Re: WTB: 88-98 rear end with 3.42 ratio (RPO GU6) The width. One thing I have always disliked about the era trucks is that the rear track width is a little narrower than the front, it looks off and I think it effects the handling. The 88-98 are wider and look like they were meant to be under our trucks. Take a look at nlped's truck, he has one of these rears under his. It looks more "correct" to me. __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

10-05-2009, 01:14 PM	#6
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: WTB: 88-98 rear end with 3.42 ratio (RPO GU6) Bump for ya, I would like to switch over to a 88-98 rear one of these days as well. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

10-05-2009, 01:24 PM	#7
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Re: WTB: 88-98 rear end with 3.42 ratio (RPO GU6) Oops, I forgot about this. I did get one last week and have it installed. __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.