anybody running these headers with a sbc - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Hillbilly Deluxe 65 · 09-29-2009, 10:59 PM

http://www.summitracing.com/parts/HE...9/?image=large

Hedman Hedders 68609

Chevy 1967-81, Camaro, Small Block

**Captainfab** · 10-01-2009, 12:14 AM

I can't say for certain on those, but considering they are Camaro headers, there may be fitment issues with installing them in a truck. If you're concerned with ground clearance take a look at Hedman's #69230. They are intended for a truck but from the installed pics I've seen they don't hang below the frame much if any.

Twisted78SS · 10-01-2009, 12:38 AM

I am pretty sure it makes no difference in answering your question, but I tried to run them on my 78, and the passenger side interfered with the firewall..

Baby Blue 66 · 10-02-2009, 12:39 PM

Those look similar to the generics that are sold on ebay for chevells. The first tube on the drivers side hits the motor mount tower if using factory towers. If your handy with a welder you can make the tower work. The passenger side is close to the frame rail but does clear.

09-29-2009, 10:59 PM	#1
Hillbilly Deluxe 65 Wheelin' and Dealin' Join Date: Nov 2007 Location: poquoson va Posts: 320	anybody running these headers with a sbc http://www.summitracing.com/parts/HE...9/?image=large Hedman Hedders 68609 Chevy 1967-81, Camaro, Small Block __________________ 1965 Chevy c-10 fleetside long bed with 06 gto LS2/T56 inside Porterbuilt Extreme front and rear 12bolt w/ eaton tru-trac 4:11 gears 1BADD65 my build thread: http://67-72chevytrucks.com/vboard/s...=1#post2601700

10-01-2009, 12:14 AM	#2
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: anybody running these headers with a sbc I can't say for certain on those, but considering they are Camaro headers, there may be fitment issues with installing them in a truck. If you're concerned with ground clearance take a look at Hedman's #69230. They are intended for a truck but from the installed pics I've seen they don't hang below the frame much if any. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

10-01-2009, 12:38 AM	#3
Twisted78SS Wide n'Low Join Date: Jan 2007 Location: La Center, WA Posts: 1,511	Re: anybody running these headers with a sbc I am pretty sure it makes no difference in answering your question, but I tried to run them on my 78, and the passenger side interfered with the firewall.. __________________ Trippin Hazard.. 67 swb, Gold Member.. 68 Suburban Air Force Retired

10-02-2009, 12:39 PM	#4
Baby Blue 66 Registered User Join Date: Oct 2006 Location: Western NY Posts: 19	Re: anybody running these headers with a sbc Those look similar to the generics that are sold on ebay for chevells. The first tube on the drivers side hits the motor mount tower if using factory towers. If your handy with a welder you can make the tower work. The passenger side is close to the frame rail but does clear.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.