Painting pulleys - The 1947 - Present Chevrolet & GMC Truck Message Board Network

samdjr74 · 10-09-2009, 02:19 PM

Hi All,

I want to clean up and reuse my pulley's for the water pump, crank pulley and power steering pulley. The problem is they are a little beat on looks but function just fine. Has anyone tried to paint their pulleys and if so how did you do it, any special paint? I know Ican just replace them with aluminum but I'm on a budget.

Thanks,
Sam

pgf545 · 10-09-2009, 02:27 PM

I would think you would be able to scuff them and shot them with some Krylon or something like that. That is what I would try. I don't think you are going to need any special paint for that. Good luck and have fun.

Bernie

OrrieG · 10-09-2009, 05:44 PM

I just clean them up to metal with a bench wire wheel. Prime and use Dupli-color #1634 engine black. I absolutely love the sheen for engine accessory parts, between semi-gloss black and flat. It is an engine paint so it is high heat. Here is a photo of my engine, brackets and power steering pump are the 1634, pulleys are Dupli-color semi- black, I ran out and wanted to get it installed.

samdjr74 · 10-09-2009, 06:11 PM

Quote:

Originally Posted by OrrieG

I just clean them up to metal with a bench wire wheel. Prime and use Dupli-color #1634 engine black. I absolutely love the sheen for engine accessory parts, between semi-gloss black and flat. It is an engine paint so it is high heat. Here is a photo of my engine, brackets and power steering pump are the 1634, pulleys are Dupli-color semi- black, I ran out and wanted to get it installed.

Perfect, thanks!!!!

buildinga55 · 10-09-2009, 10:52 PM

Another really good satin black that is very close to a GM factory black for under the hood is a Rustoleum 7777. You can get it a Walley World, Lowes, Home Depot etc. It has a picture of lawn furniture on the can. Looks very factory. About $5.00 a can.

stan3018 · 10-09-2009, 11:01 PM

MAN JUST BUY NEW PULLEYS ,DONT BE CHEAP ! ITS NOT MUCH ITS A SHOW TRUCK

PULLYEYS ARE CHEAP

samdjr74 · 10-10-2009, 01:51 PM

Quote:

Originally Posted by stan3018

MAN JUST BUY NEW PULLEYS ,DONT BE CHEAP ! ITS NOT MUCH ITS A SHOW TRUCK

PULLYEYS ARE CHEAP

Well I don't know about that, pulleys are going to set me back $300+ and as far as a show truck, it's a crusier for me, yes I want it ot look good but I don't have the cash to spend on a set of pulleys that will sit under the hood and only seen at car shows. Maybe down the road I might but not now

54 jimmy · 10-10-2009, 01:58 PM

i painted mine with satin black bbq grill paint. the look great and it has a temp rating of 1400 degrees. cost 4 buck for a can of paint at k mart.

samdjr74 · 10-10-2009, 04:17 PM

Quote:

Originally Posted by 54 jimmy

i painted mine with satin black bbq grill paint. the look great and it has a temp rating of 1400 degrees. cost 4 buck for a can of paint at k mart.

I just picked up a can of semi gloss black engine paint, cleaned the pulleys and hit them with a few coats, that look pretty good and for less then $10 I can't go wrong

**mr48chev** · 10-10-2009, 08:48 PM

That really looks good Orrie, thanks for the info. I've used Ace hardware satin black and it's ok but that looks better.

Aluminum pulleys are nice looking if you are going for that look but for the price difference I'll stay with the painted steel on the 71.

I did see a nice shiny aluminum pulley on the side of the highway the other day with the center broken out of it though. The guy who lost it left it where it rolled after it fell out of the car. I stopped where I saw it to pick it up on the way back an someone else had picked it up. Some of the aluminum pulleys you see now are rather suspect in quality.

NONHOG · 10-11-2009, 11:52 AM

I've gone with Hammerite and was pleased. They have standard colors w/o the funky hammered finish. Stronger than your regular bomb can paint.

10-09-2009, 02:27 PM	#2
pgf545 Registered User Join Date: May 2006 Location: Santa Fe,Texas Posts: 933	Re: Painting pulleys I would think you would be able to scuff them and shot them with some Krylon or something like that. That is what I would try. I don't think you are going to need any special paint for that. Good luck and have fun. Bernie __________________ 52 Chevy Truck (Dad's) http://67-72chevytrucks.com/vboard/s...d.php?t=206021

10-09-2009, 05:44 PM	#3
OrrieG Registered User Join Date: Jun 2006 Location: Idaho Posts: 8,800	Re: Painting pulleys I just clean them up to metal with a bench wire wheel. Prime and use Dupli-color #1634 engine black. I absolutely love the sheen for engine accessory parts, between semi-gloss black and flat. It is an engine paint so it is high heat. Here is a photo of my engine, brackets and power steering pump are the 1634, pulleys are Dupli-color semi- black, I ran out and wanted to get it installed. Attached Images __________________ 1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project Last edited by OrrieG; 10-09-2009 at 05:50 PM.

10-09-2009, 10:52 PM	#5
buildinga55 Registered User Join Date: Jan 2009 Location: Springfield, MO Posts: 258	Re: Painting pulleys Another really good satin black that is very close to a GM factory black for under the hood is a Rustoleum 7777. You can get it a Walley World, Lowes, Home Depot etc. It has a picture of lawn furniture on the can. Looks very factory. About $5.00 a can.

10-09-2009, 11:01 PM	#6
stan3018 Registered User Join Date: Feb 2009 Location: bronx ny Posts: 167	Re: Painting pulleys MAN JUST BUY NEW PULLEYS ,DONT BE CHEAP ! ITS NOT MUCH ITS A SHOW TRUCKPULLYEYS ARE CHEAP

10-10-2009, 01:58 PM	#8
54 jimmy Registered User Join Date: Oct 2007 Location: pittston,PA Posts: 1,184	Re: Painting pulleys i painted mine with satin black bbq grill paint. the look great and it has a temp rating of 1400 degrees. cost 4 buck for a can of paint at k mart. __________________ There is nothing you can't fix with a BFH or a FIRE WRENCH. 1997 chevy k1500 ext cab z71 (daily driver) sold 1996 chevy k1500 reg cab 4x4(daily driver)totaled 2008jeep patriot (wife's daily driver 2008 chevy 1500 ext cab 4x4 sold 2011 chevy 1500 crew cab ltz (daily driver) 1996 chevy 1500 reg cab 4x4 project sold 2006 pontiac grand prix gxp (daily work commuter)

10-09-2009, 02:19 PM	#1
samdjr74 Registered User Join Date: Aug 2005 Location: NJ Posts: 160	Painting pulleys Hi All, I want to clean up and reuse my pulley's for the water pump, crank pulley and power steering pulley. The problem is they are a little beat on looks but function just fine. Has anyone tried to paint their pulleys and if so how did you do it, any special paint? I know Ican just replace them with aluminum but I'm on a budget. Thanks, Sam

10-10-2009, 08:48 PM	#10
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,711	Re: Painting pulleys That really looks good Orrie, thanks for the info. I've used Ace hardware satin black and it's ok but that looks better. Aluminum pulleys are nice looking if you are going for that look but for the price difference I'll stay with the painted steel on the 71. I did see a nice shiny aluminum pulley on the side of the highway the other day with the center broken out of it though. The guy who lost it left it where it rolled after it fell out of the car. I stopped where I saw it to pick it up on the way back an someone else had picked it up. Some of the aluminum pulleys you see now are rather suspect in quality.

10-11-2009, 11:52 AM	#11
NONHOG Registered User Join Date: Feb 2007 Location: Marana, Arizona Posts: 3,457	Re: Painting pulleys I've gone with Hammerite and was pleased. They have standard colors w/o the funky hammered finish. Stronger than your regular bomb can paint. __________________ "I feel the need for speed!"... as soon as I am done with my nap.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.