trouble finding replacement stepside fender - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mamato2 · 10-11-2009, 01:38 PM

Hi - I have an 83 c10 stepside. I have been working on it for awhile and hope to tie up many of the loose ends when it is off the road for the winter. One of the main things I want to replace is the drivers side bed panel and rear fender (it is currently held on with a bungee cord!). I've been looking on craigs list and e-bay, and also parts dealers like brothers, lmc, american classic truck parts, ... No luck. My gas tank filler hole is on the drivers side and every fender I have found has the hole on the passenger side. Not sure why I am having such trouble finding this fender. Any ideas on where to look? Thank you!!!

locab36 · 10-11-2009, 08:33 PM

Dual tank models have fuel fillers on both fenders. I believe only 6cyl and 305's had the standard single tank on the left or drivers side, right side, passenger side tank was the auxillary.

John

**old Rusty C10** · 10-11-2009, 09:16 PM

try captkaos and tri-proautomotive our site vendors they may be able to help you

pcwillsie · 10-11-2009, 09:57 PM

mar k builds everything you need to rebuild your bed if I remember correctly

gchemist · 10-12-2009, 12:04 AM

Too bad you are far from Texas. I found a complete stepside bed on craigslist. Looks good too.

mamato2 · 10-14-2009, 01:29 PM

thanks for your help! I will check out those websites. It's difficult knowing what is what on this truck because so many different people have worked on it. The cab and frame are 83', the bed I am not sure of - it has been replaced. It has a rebuilt 350, with 40,000 on the rebuild (not sure how old it is though). I am starting to think my best bet may just be to replace the entire bed, I just don't want to move the gas tank, so finding those fenders is going to be tricky!

10-11-2009, 01:38 PM	#1
mamato2 Registered User Join Date: Oct 2009 Location: worcester, ma Posts: 35	trouble finding replacement stepside fender Hi - I have an 83 c10 stepside. I have been working on it for awhile and hope to tie up many of the loose ends when it is off the road for the winter. One of the main things I want to replace is the drivers side bed panel and rear fender (it is currently held on with a bungee cord!). I've been looking on craigs list and e-bay, and also parts dealers like brothers, lmc, american classic truck parts, ... No luck. My gas tank filler hole is on the drivers side and every fender I have found has the hole on the passenger side. Not sure why I am having such trouble finding this fender. Any ideas on where to look? Thank you!!!

10-11-2009, 08:33 PM	#2
locab36 Registered User Join Date: Jun 2004 Location: Midland, MI Posts: 265	Re: trouble finding replacement stepside fender Dual tank models have fuel fillers on both fenders. I believe only 6cyl and 305's had the standard single tank on the left or drivers side, right side, passenger side tank was the auxillary. John __________________ Locab36 1936 low cab 1/2 ton 1956 BMW R25/3 1968 Moto Guzzi V7 1969 BMW R100/2 1986 Silverado SWB 2007 Harley FLHTP 2011 GMC SWB 4x4 Z71 http://www.flickr.com/photos/locab36...7623329816080/

10-11-2009, 09:16 PM	#3
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	Re: trouble finding replacement stepside fender try captkaos and tri-proautomotive our site vendors they may be able to help you __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

10-11-2009, 09:57 PM	#4
pcwillsie Registered User Join Date: Mar 2007 Location: oklahoma Posts: 118	Re: trouble finding replacement stepside fender mar k builds everything you need to rebuild your bed if I remember correctly

10-12-2009, 12:04 AM	#5
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	Re: trouble finding replacement stepside fender Too bad you are far from Texas. I found a complete stepside bed on craigslist. Looks good too. __________________ Gerardo a.k.a. Mad Chemist Silverado XST videos

10-14-2009, 01:29 PM	#6
mamato2 Registered User Join Date: Oct 2009 Location: worcester, ma Posts: 35	Re: trouble finding replacement stepside fender thanks for your help! I will check out those websites. It's difficult knowing what is what on this truck because so many different people have worked on it. The cab and frame are 83', the bed I am not sure of - it has been replaced. It has a rebuilt 350, with 40,000 on the rebuild (not sure how old it is though). I am starting to think my best bet may just be to replace the entire bed, I just don't want to move the gas tank, so finding those fenders is going to be tricky!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.