Another 50 footer rolls off the CPNE assembly line - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**CPNE** · 10-30-2009, 07:45 PM

4th truck in 18 months. This one a 67 c20 (VIN, frame and hood are the only 67 parts). 68 fenders, 72 cab and bed, disk brakes, , tilt, 402BB/TH400, 4:11 rear. No rust, some dents.

Built from parts and pieces I've amassed over the past several years. Built to tow trailer and mowers for landscaping biz my son owns. I like the painted trim/bumpers/hubcaps theme. Didn't paint the inside of the cab cause I'm lazy and it still needs a floor mat thats on order.

**CPNE** · 10-30-2009, 07:48 PM

Dig the "crushed velour" seat and the painted pverty caps

**N2TRUX** · 10-30-2009, 07:50 PM

Nice freakin "work truck".

**CPNE** · 10-30-2009, 08:02 PM

In case anyone askes what's under the plastic in the background...

A sneak peak. This one is going a bit slower as we're not throwing it together. This is my sons. It will be a 67 SWB GMC lowered 4/6 with a BB and fleetside bed, tilt and buddy buckets

JimKshortstep4x4 · 10-30-2009, 08:06 PM

Jeff,

That truck looks pretty good!

Should haul the mowers and whatever without any trouble.

Jim

**71swb4x4** · 10-30-2009, 08:09 PM

402, TH400 and 4.11 rear? Your son must have some BIG mowers!!

**70cst** · 10-30-2009, 08:51 PM

Quote:

Originally Posted by 71swb4x4

402, TH400 and 4.11 rear? Your son must have some BIG mowers!!

This way he can lay tracks from going to one business appointment to another.

By the way...very nice looking truck.

**CPNE** · 10-30-2009, 09:02 PM

Quote:

Originally Posted by 71swb4x4

402, TH400 and 4.11 rear? Your son must have some BIG mowers!!

A pair of these on a 16 foot trailer.

Here's the current tow vehicle

**CPNE** · 10-30-2009, 09:11 PM

And the third truck in the business "fleet"

**special-K** · 10-31-2009, 08:50 AM

Give yourself more credit.That`s a twenty footer,at least.If you painted the interior it would be a 10 footer.But that`s what you get for being lazy

.That would be a nice truck to drive or work.
I just knew there was a`67 GMC in the works.

Smallz72project · 10-31-2009, 09:07 AM

Great looking truck! Should definetely be able to haul some major grass!! And look great doing it. Was wondering...on your sons 67, whats the paint code for that blue if you have it around and dont mind sharing it. Its absolutely stunning. Im currently building my own 67 project, although I think Im only gunna go 3/5 drop and pondering a 502 BB. But thats down the road abit...my cab is no where nearly as nice as either of yours.

nuke1 · 10-31-2009, 10:14 AM

What color is your sons truck pinted, gotgeous color and a great work fleet.

jeffspower · 10-31-2009, 02:29 PM

Looks alot better than a 50 footer to me

If you don't mind me asking, what paint code is on that "slower project" cab? I love it.

**CPNE** · 10-31-2009, 06:09 PM

It's a blue metallic from an 08 or 09 Tundra or Tacoma. I'll have to ask. It is an outstanding color if you like blue.

**CPNE** · 10-31-2009, 06:17 PM

Tim,

We call em half-arsed restos. Half of them are running, half of them are getting parts swapped between em

**CPNE** · 10-31-2009, 06:53 PM

Quote:

Originally Posted by jeffspower

Looks alot better than a 50 footer to me

If you don't mind me asking, what paint code is on that "slower project" cab? I love it.

Paint code:

NAPA Martin Senour Paints 5ba-62305 Blue Metallic Base

CPNEJR · 10-31-2009, 07:38 PM

Looks awesome dad. now i can't wait to see it in person

67ChevyRedneck · 10-31-2009, 09:41 PM

Nice work truck(s) and that one under the tarp is going to be sharp!!!

Is that pretty blue truck to replace the poor one that got killed by the tree

**71swb4x4** · 10-31-2009, 10:47 PM

Those Exmarks are some nice mowers. I mow a bunch a few rental house yards but not enough to justify a nice mower like that. Hopefully some day!
I bet those mowers are some real money makers for you.

**CPNE** · 11-01-2009, 06:42 PM

Quote:

Originally Posted by 67ChevyRedneck

Nice work truck(s) and that one under the tarp is going to be sharp!!!

Is that pretty blue truck to replace the poor one that got killed by the tree

You are correct. This was Burnsman's project that we bought a year ago

10-30-2009, 07:45 PM	#1
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,662	Another 50 footer rolls off the CPNE assembly line 4th truck in 18 months. This one a 67 c20 (VIN, frame and hood are the only 67 parts). 68 fenders, 72 cab and bed, disk brakes, , tilt, 402BB/TH400, 4:11 rear. No rust, some dents. Built from parts and pieces I've amassed over the past several years. Built to tow trailer and mowers for landscaping biz my son owns. I like the painted trim/bumpers/hubcaps theme. Didn't paint the inside of the cab cause I'm lazy and it still needs a floor mat thats on order. Attached Images __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

10-30-2009, 07:48 PM	#2
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,662	Re: Another 50 footer rolls off the CPNE assembly line Dig the "crushed velour" seat and the painted pverty caps Attached Images __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

10-30-2009, 07:50 PM	#3
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Re: Another 50 footer rolls off the CPNE assembly line Nice freakin "work truck". __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

10-30-2009, 08:02 PM	#4
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,662	Re: Another 50 footer rolls off the CPNE assembly line In case anyone askes what's under the plastic in the background... A sneak peak. This one is going a bit slower as we're not throwing it together. This is my sons. It will be a 67 SWB GMC lowered 4/6 with a BB and fleetside bed, tilt and buddy buckets Attached Images __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

10-30-2009, 08:06 PM	#5
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Re: Another 50 footer rolls off the CPNE assembly line Jeff, That truck looks pretty good! Should haul the mowers and whatever without any trouble. Jim __________________ 1971 Shortbox step side 4x4, 350 sbc, 3:07 rear end 1965 Impala SS 400 sbc, Muncie rock crusher 1966 Impala SS 396 bbc, TH 400 1969 El Camino, 350 sbc, TH 350 1971 Snowplow built on a Blazer frame 1972 GMC Short bed, stepside, TH 400, 427 BBC

10-30-2009, 08:09 PM	#6
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,499	Re: Another 50 footer rolls off the CPNE assembly line 402, TH400 and 4.11 rear? Your son must have some BIG mowers!! __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

10-30-2009, 09:11 PM	#9
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,662	Re: Another 50 footer rolls off the CPNE assembly line And the third truck in the business "fleet" Attached Images __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

10-31-2009, 08:50 AM	#10
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Another 50 footer rolls off the CPNE assembly line Give yourself more credit.That`s a twenty footer,at least.If you painted the interior it would be a 10 footer.But that`s what you get for being lazy .That would be a nice truck to drive or work. I just knew there was a`67 GMC in the works. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

10-31-2009, 09:07 AM	#11
Smallz72project Registered User Join Date: May 2005 Location: Missoula, MT Posts: 273	Re: Another 50 footer rolls off the CPNE assembly line Great looking truck! Should definetely be able to haul some major grass!! And look great doing it. Was wondering...on your sons 67, whats the paint code for that blue if you have it around and dont mind sharing it. Its absolutely stunning. Im currently building my own 67 project, although I think Im only gunna go 3/5 drop and pondering a 502 BB. But thats down the road abit...my cab is no where nearly as nice as either of yours. __________________ - 1967 Chevy C10 shortbox - 1984 Chevy K10 "Mater"- SWB 305 manual, retired sheriffs truck, Current Frame Off Project - 1986 Chevy K10 LWB 350/350 Daily Driver/project

10-31-2009, 10:14 AM	#12
nuke1 Registered User Join Date: Jun 2007 Location: Saskatoon, Saskatchewan,: Posts: 2,901	Re: Another 50 footer rolls off the CPNE assembly line What color is your sons truck pinted, gotgeous color and a great work fleet. __________________ James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587

10-31-2009, 02:29 PM	#13
jeffspower Well, Whoop-dee-do! Join Date: Mar 2003 Location: Easton, Mo. pop.- me & scarcely a few others Posts: 2,302	Re: Another 50 footer rolls off the CPNE assembly line Looks alot better than a 50 footer to me If you don't mind me asking, what paint code is on that "slower project" cab? I love it. __________________ '68 GMC shortbox 4x4 350/SM465/T221- bought it in '83 SOLD '72 K20 500 Cad/TH400/NP205 SOLD '92 Chevy 2500 6.5 mech TD 4L80E crusty daily driver '72 Monte Carlo... sweet low mile toy '11 Dodge Challenger IE 392 6spd... midlife car

10-31-2009, 06:09 PM	#14
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,662	Re: Another 50 footer rolls off the CPNE assembly line It's a blue metallic from an 08 or 09 Tundra or Tacoma. I'll have to ask. It is an outstanding color if you like blue. __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

10-31-2009, 06:17 PM	#15
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,662	Re: Another 50 footer rolls off the CPNE assembly line Tim, We call em half-arsed restos. Half of them are running, half of them are getting parts swapped between em __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

10-31-2009, 07:38 PM	#17
CPNEJR Registered User Join Date: Sep 2003 Location: Franconia,N.H. Posts: 1,029	Re: Another 50 footer rolls off the CPNE assembly line Looks awesome dad. now i can't wait to see it in person __________________ (Only) Member of the CPNE Fan Club Aint that the truth 67 C-10 350 with 3-speed tranny and 308 gears swb step 82 Z28 Camaro 355 small block over 350 hp and a borg warner super t-10 (blown engine) 72 Chevy K20 Suburban (future project) 70 Chevy K20 now 68 GMC K2500 2003 Chevy 2500hd ccsb 4X4 (daily driver)

10-31-2009, 09:41 PM	#18
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Another 50 footer rolls off the CPNE assembly line Nice work truck(s) and that one under the tarp is going to be sharp!!! Is that pretty blue truck to replace the poor one that got killed by the tree __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! Last edited by 67ChevyRedneck; 10-31-2009 at 09:42 PM.



Register or Log In To remove these advertisements.

10-31-2009, 10:47 PM	#19
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,499	Re: Another 50 footer rolls off the CPNE assembly line Those Exmarks are some nice mowers. I mow a bunch a few rental house yards but not enough to justify a nice mower like that. Hopefully some day! I bet those mowers are some real money makers for you. __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

Register or Log In To remove these advertisements.