How much does a TF weigh? (suspension purposes) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hotrodrookie · 11-07-2009, 05:05 PM

I don’t have the scales (let alone a complete truck to weigh) but I have a 59 swb step side. I’m trying to figure how much of a rear coil over spring rate to invest in.(building a 4 link) Right now I have 200lb rated springs, any of you guys know what the weight would be of the truck? Rear of the truck?

Anybody have any input on spring ratings and how they make the truck feel? I’m new to this and this is my first time building a suspension.

Thanks

dwcsr · 11-07-2009, 05:20 PM

the truck should weigh about 3450. don't know about coil overs

mbgmike · 11-07-2009, 05:26 PM

Try this Pal

http://www.swayaway.com/calculators/...Calc.php#step1

hotrodrookie · 11-07-2009, 05:37 PM

Quote:

Originally Posted by mbgmike

Try this Pal

http://www.swayaway.com/calculators/...Calc.php#step1

Sweet, very cool

Coronas56 · 11-07-2009, 05:58 PM

I am using 400lb springs for my set up in rear, They were recommended from the place I purchased my front end Kit from.

MrTucker · 11-07-2009, 06:40 PM

Quote:

Originally Posted by dwcsr

the truck should weigh about 3450. don't know about coil overs

My '53 is 4800 lbs...

OrrieG · 11-07-2009, 08:05 PM

My 59 TF with 4WD crosss the scales at around 4200. Transfer case is about 250#, front axle probably the same, drive line 30#. So as a 2wd it was about 3600. The 350/350 probably weighs a little more than the 6-3speed that come with it.

11-07-2009, 05:05 PM	#1
hotrodrookie Registered User Join Date: Sep 2008 Location: Sacramento Posts: 425	How much does a TF weigh? (suspension purposes) I don’t have the scales (let alone a complete truck to weigh) but I have a 59 swb step side. I’m trying to figure how much of a rear coil over spring rate to invest in.(building a 4 link) Right now I have 200lb rated springs, any of you guys know what the weight would be of the truck? Rear of the truck? Anybody have any input on spring ratings and how they make the truck feel? I’m new to this and this is my first time building a suspension. Thanks

11-07-2009, 05:20 PM	#2
dwcsr Hollister Road Co. Join Date: Apr 2005 Location: Houston Posts: 6,131	Re: How much does a TF weigh? (suspension purposes) the truck should weigh about 3450. don't know about coil overs

11-07-2009, 05:26 PM	#3
mbgmike Registered User Join Date: Aug 2005 Location: Pasadena,Tx /Pto Pta DR Posts: 5,415	Re: How much does a TF weigh? (suspension purposes) Try this Pal http://www.swayaway.com/calculators/...Calc.php#step1

11-07-2009, 05:58 PM	#5
Coronas56 Registered User Join Date: Nov 2005 Location: Tropical Minnesota Posts: 282	Re: How much does a TF weigh? (suspension purposes) I am using 400lb springs for my set up in rear, They were recommended from the place I purchased my front end Kit from. __________________ Semper Fi! Last edited by Coronas56; 11-07-2009 at 06:27 PM.

11-07-2009, 08:05 PM	#7
OrrieG Registered User Join Date: Jun 2006 Location: Idaho Posts: 8,800	Re: How much does a TF weigh? (suspension purposes) My 59 TF with 4WD crosss the scales at around 4200. Transfer case is about 250#, front axle probably the same, drive line 30#. So as a 2wd it was about 3600. The 350/350 probably weighs a little more than the 6-3speed that come with it. __________________ 1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.