![]() |
![]() |
#1 |
resto body guy
Join Date: Mar 2008
Location: milford, Nebraska
Posts: 128
|
tbi swap begins....
as many of you know i'm putting a tbi 350 injected small block in my 71 super.
i got the donor motor all cleaned up ready to drop in just need to get the engine bay all cleaned up in the truck. the plan is to remove the stock tank from the cab and use a yukon tank that i picked up under the bed. i still don't know if i have to have the air diverter and pipe that went exhaust manifold to exhaust manifold i was going to use them but they were cracked. so can i use ram horns?? and get rid of the pipe? and air diverter? enjoy the pics even my daughter had to get in the pics! last pic is my dads new truck which tbi came out of.. we swapped in older 350 carb motor into it. David |
![]() |
![]() |
![]() |
#2 |
Senior Member
![]() Join Date: Aug 2004
Location: Centennial, CO
Posts: 2,995
|
Re: tbi swap begins....
You can get rid of all the air injection stuff.
Too bad you're not closer, there's a good TBI tuner here in Denver.
__________________
ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Dec 2003
Location: Thomasville, NC
Posts: 1,877
|
Re: tbi swap begins....
cool, keep up the work,like to see in the truck
![]() |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: May 2007
Location: Southern, Saskatchewan
Posts: 640
|
Re: tbi swap begins....
Up here in Saskatchewan we need that warm air to keep carb/tbi from icing up when its right around freezing. You might be okay where you are or if you don't do winter driving.
__________________
Kerry My build thread. http://67-72chevytrucks.com/vboard/s....php?p=3657823 1971 Chev SWB with 68 nose, 6.2 diesel th350, and 3.73 rear gears 1988 Chev Extendacab 2010 Honda VT1300CS Sabre 2005 Buick Rendezvous wife's ride |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Apr 2006
Location: East Sooke B.C. Canada
Posts: 543
|
Re: tbi swap begins....
TBI computers with air pumps go open loop at idle, meaning it will run rich at idle without the air pump. You can use a computer or prom from a truck with no air pump and that will correct that problem.
|
![]() |
![]() |
![]() |
#6 |
resto body guy
Join Date: Mar 2008
Location: milford, Nebraska
Posts: 128
|
Re: tbi swap begins....
here look at the installed pics in the 87 there was no air pump just a valve check it out see if i can get rid of it?
thanks,David ![]() ![]() |
![]() |
![]() |
![]() |
#7 |
resto body guy
Join Date: Mar 2008
Location: milford, Nebraska
Posts: 128
|
Re: tbi swap begins....
finally got the 71 super home! man i'm stoked to get working on this thing!!!
enjoy the pics! ![]() ![]() ![]() ![]() ![]() ![]() over all the truck isn't in bad shape. nothing a good body man can't fix! |
![]() |
![]() |
![]() |
#8 |
resto body guy
Join Date: Mar 2008
Location: milford, Nebraska
Posts: 128
|
Re: tbi swap begins....
where can i get a new seat cover?
|
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: May 2007
Location: Southern, Saskatchewan
Posts: 640
|
Re: tbi swap begins....
LMC Trucks for $159.95 and up I believe.
__________________
Kerry My build thread. http://67-72chevytrucks.com/vboard/s....php?p=3657823 1971 Chev SWB with 68 nose, 6.2 diesel th350, and 3.73 rear gears 1988 Chev Extendacab 2010 Honda VT1300CS Sabre 2005 Buick Rendezvous wife's ride |
![]() |
![]() |
![]() |
Bookmarks |
|
|