want opinions and pics - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*Stitch* · 12-11-2009, 11:11 PM

I'm thinking about maybe taking my truck and putting a cab and chassis rear under it and putting some 19.5s on it and lowering it down some...I like the look of dually wheels, but I don't think a regular cab swb dually would look good with the fenders on the bed and the truck being so short...so I thought maybe get a cab and chassis rear and tuck the wheels up under the fleetside bed sides...just a thought...what do yall think...

Chuck.

wfomkivdrvr · 12-12-2009, 01:18 AM

I've seen pictures of a fleetside with that set up with standard off set dually rims the tires only come out of the fenders about an 1 in 1.5 in it didnt look bad at all some small flares and your all set

*Stitch* · 12-12-2009, 01:27 AM

I'd rather shorten the axles and have all of the wheel/tire up under the bed...

*2tons of fun* · 12-12-2009, 01:32 AM

you will have too.

get a you 14bff and find a second short shaft and knock the differance out of the longshaft tube, install short shaft and you are now atleast 3" narrower.

*Stitch* · 12-12-2009, 01:37 AM

and then it'll fit up under the bed right? do you think I should just extend the wheel wells out like factory...I'd like to do this for the look, because I don't think I'll ever tow a fifth wheel trailer or anything, I don't even know if my 6.2 would tow it...I just thought it would be cool to see...

wfomkivdrvr · 12-12-2009, 01:38 AM

found the pic

*Stitch* · 12-12-2009, 01:40 AM

see now if I could get the wheels under the bed like 2tons of fun said, then I'd be in business...I also think I'm going to put cab lights up on the roof whether I put drw axle under it or not...

wfomkivdrvr · 12-12-2009, 01:45 AM

you will have to relocate the leaf springs a cab chassis axle has the tires real close too the leafs

*Stitch* · 12-12-2009, 01:49 AM

that's no problem...shortening the axle is what worries me

wfomkivdrvr · 12-12-2009, 01:53 AM

thats not a problem they do that for drag cars and crawlers all the time!

*Stitch* · 12-12-2009, 01:56 AM

is shortening the housing and putting a shortside shaft in the longside doable by me or do I need to take it to a specialist?

wfomkivdrvr · 12-12-2009, 02:04 AM

that depends on your welding skills how well can you weld .500 wall tube?

*Stitch* · 12-12-2009, 02:13 AM

I have a good friend of mine that can weld it...is it just a matter of measuring the axle tube, welding it and then sliding a shortside shaft in there or does the shaft need to be shortened as well?

wfomkivdrvr · 12-12-2009, 02:33 AM

that depends on how much you shorten it but yes you can install a short shaft in there with out a problem just like 2 ton of fun said!

12-11-2009, 11:11 PM	#1
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	want opinions and pics I'm thinking about maybe taking my truck and putting a cab and chassis rear under it and putting some 19.5s on it and lowering it down some...I like the look of dually wheels, but I don't think a regular cab swb dually would look good with the fenders on the bed and the truck being so short...so I thought maybe get a cab and chassis rear and tuck the wheels up under the fleetside bed sides...just a thought...what do yall think... Chuck.

12-12-2009, 01:18 AM	#2
wfomkivdrvr HORSEPOWER JUNKIE Join Date: Feb 2008 Location: Esparto,CA. Posts: 97	Re: want opinions and pics I've seen pictures of a fleetside with that set up with standard off set dually rims the tires only come out of the fenders about an 1 in 1.5 in it didnt look bad at all some small flares and your all set __________________ 67 C20 fleetside custom camper 69 El Camino 72 Camaro 52 Dodge b3b 108 pickup

12-12-2009, 01:27 AM	#3
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: want opinions and pics I'd rather shorten the axles and have all of the wheel/tire up under the bed...

12-12-2009, 01:32 AM	#4
2tons of fun Account Suspended Join Date: Jan 2009 Location: galt ca, Posts: 749	Re: want opinions and pics you will have too. get a you 14bff and find a second short shaft and knock the differance out of the longshaft tube, install short shaft and you are now atleast 3" narrower.

12-12-2009, 01:37 AM	#5
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: want opinions and pics and then it'll fit up under the bed right? do you think I should just extend the wheel wells out like factory...I'd like to do this for the look, because I don't think I'll ever tow a fifth wheel trailer or anything, I don't even know if my 6.2 would tow it...I just thought it would be cool to see...

12-12-2009, 01:38 AM	#6
wfomkivdrvr HORSEPOWER JUNKIE Join Date: Feb 2008 Location: Esparto,CA. Posts: 97	Re: want opinions and pics found the pic Attached Images __________________ 67 C20 fleetside custom camper 69 El Camino 72 Camaro 52 Dodge b3b 108 pickup

12-12-2009, 01:40 AM	#7
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: want opinions and pics see now if I could get the wheels under the bed like 2tons of fun said, then I'd be in business...I also think I'm going to put cab lights up on the roof whether I put drw axle under it or not...

12-12-2009, 01:45 AM	#8
wfomkivdrvr HORSEPOWER JUNKIE Join Date: Feb 2008 Location: Esparto,CA. Posts: 97	Re: want opinions and pics you will have to relocate the leaf springs a cab chassis axle has the tires real close too the leafs __________________ 67 C20 fleetside custom camper 69 El Camino 72 Camaro 52 Dodge b3b 108 pickup

12-12-2009, 01:49 AM	#9
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: want opinions and pics that's no problem...shortening the axle is what worries me

12-12-2009, 01:53 AM	#10
wfomkivdrvr HORSEPOWER JUNKIE Join Date: Feb 2008 Location: Esparto,CA. Posts: 97	Re: want opinions and pics thats not a problem they do that for drag cars and crawlers all the time! __________________ 67 C20 fleetside custom camper 69 El Camino 72 Camaro 52 Dodge b3b 108 pickup

12-12-2009, 01:56 AM	#11
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: want opinions and pics is shortening the housing and putting a shortside shaft in the longside doable by me or do I need to take it to a specialist?

12-12-2009, 02:04 AM	#12
wfomkivdrvr HORSEPOWER JUNKIE Join Date: Feb 2008 Location: Esparto,CA. Posts: 97	Re: want opinions and pics that depends on your welding skills how well can you weld .500 wall tube? __________________ 67 C20 fleetside custom camper 69 El Camino 72 Camaro 52 Dodge b3b 108 pickup

12-12-2009, 02:13 AM	#13
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: want opinions and pics I have a good friend of mine that can weld it...is it just a matter of measuring the axle tube, welding it and then sliding a shortside shaft in there or does the shaft need to be shortened as well?

12-12-2009, 02:33 AM	#14
wfomkivdrvr HORSEPOWER JUNKIE Join Date: Feb 2008 Location: Esparto,CA. Posts: 97	Re: want opinions and pics that depends on how much you shorten it but yes you can install a short shaft in there with out a problem just like 2 ton of fun said! __________________ 67 C20 fleetside custom camper 69 El Camino 72 Camaro 52 Dodge b3b 108 pickup



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.