will full-length headers clear? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dbmx66 · 12-18-2009, 11:00 PM

i have a 78 c10 its lowered 5 in the front with 3 inch smaller tires in the front so roughly a 6.5 front drop. will full length headers scrape? thanks.

flamingbig10 · 12-18-2009, 11:34 PM

it depends on how low they hang I have long tubes and they don't scrape

dbmx66 · 12-18-2009, 11:36 PM

Quote:

Originally Posted by flamingbig10

it depends on how low they hang I have long tubes and they don't scrape

i was looking at these. what do you think?
http://www.summitracing.com/parts/HED-69088/

KQQL IT · 12-19-2009, 06:10 AM

Ive dougs d-310c fit great 0 clearence issues, but spendy and no emissions stuff.

grinch4om · 12-19-2009, 11:06 AM

I say buy Chevelle headers

dbmx66 · 12-19-2009, 11:09 AM

Quote:

Originally Posted by grinch4om

I say buy Chevelle headers

which ones you think?

blazer2007 · 12-19-2009, 11:43 AM

I,d say chevelle 3/4 ,better safe than sorry,might want to go lower in the future

68 TT · 12-19-2009, 12:06 PM

I had these on my 67 C-10 and they hung about 4" below the bottom of the stock oil pan. They never drug but it was not much below stock ride height.

http://www.summitracing.com/parts/SU...6/?image=large

The also fit my 78 K20 with some minor mods to the collector area on the passenger side to clear the spring hanger better.

68 TT · 12-19-2009, 12:09 PM

Quote:

Originally Posted by dbmx66

i was looking at these. what do you think?
http://www.summitracing.com/parts/HED-69088/

Those look pretty nice and look to be pretty close in depth to what i have so it shouldn't hang down too low. That ball & socket collector is really nice too.

mrnize · 12-19-2009, 02:11 PM

Quote:

Originally Posted by KQQL IT

Ive dougs d-310c fit great 0 clearence issues, but spendy and no emissions stuff.

WOW
That oil pan, if im right.. is like 4-6 inchs away from concrete???
Thats insane.

How much of a drop is on this truck?

KQQL IT · 12-19-2009, 04:51 PM

Quote:

Originally Posted by mrnize

WOW
That oil pan, if im right.. is like 4-6 inchs away from concrete???
Thats insane.

How much of a drop is on this truck?

Its like 3" from the road. Didnt measure the drop cut two coils. The pan was a mistake they said 8qts i assumed 7 in the pan 1 in the filter... Oops

KQQL IT · 12-19-2009, 04:53 PM

Also i know for fact these fit too but o thought Dbmx66 wanted full length. "Patriot Exhaust H8021-1 - Patriot Clippster Headers"

mrnize · 12-19-2009, 05:26 PM

The front end is stock, minus the coils being cut, no lowering spindles?
Oil pan is a beauty though

KQQL IT · 12-19-2009, 06:23 PM

Quote:

Originally Posted by mrnize

The front end is stock, minus the coils being cut, no lowering spindles?
Oil pan is a beauty though

Ya 2 coils cut from a pair of junkyard coils selected for the smallest wire diameter. And a set of 72 lower A arms for more clearence

3r!c84 · 12-19-2009, 06:31 PM

i use to work at moroso speedway (before it was pbir) got a bunch of nice moroso parts before they closed the track

12-18-2009, 11:00 PM	#1
dbmx66 Registered User Join Date: Aug 2009 Location: PA Posts: 883	will full-length headers clear? i have a 78 c10 its lowered 5 in the front with 3 inch smaller tires in the front so roughly a 6.5 front drop. will full length headers scrape? thanks.

12-18-2009, 11:34 PM	#2
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: will full-length headers clear? it depends on how low they hang I have long tubes and they don't scrape __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

12-19-2009, 06:10 AM	#4
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,291	Re: will full-length headers clear? Ive dougs d-310c fit great 0 clearence issues, but spendy and no emissions stuff. __________________ " That didnt make it any newer " " Dont antique the equipment "

12-19-2009, 11:06 AM	#5
grinch4om dang its hot Join Date: Nov 2006 Location: frankfort kentucky Posts: 1,349	Re: will full-length headers clear? I say buy Chevelle headers

12-19-2009, 11:43 AM	#7
blazer2007 Registered User Join Date: Jan 2007 Location: vernon b.c. Posts: 3,022	Re: will full-length headers clear? I,d say chevelle 3/4 ,better safe than sorry,might want to go lower in the future

12-19-2009, 12:06 PM	#8
68 TT Still plays with trucks Join Date: Jul 2009 Location: Spokane, WA Posts: 3,556	Re: will full-length headers clear? I had these on my 67 C-10 and they hung about 4" below the bottom of the stock oil pan. They never drug but it was not much below stock ride height. http://www.summitracing.com/parts/SU...6/?image=large The also fit my 78 K20 with some minor mods to the collector area on the passenger side to clear the spring hanger better. __________________ miSSed opportunity - ground up creation of an AWD 1994 454 SS that never was http://67-72chevytrucks.com/vboard/s...d.php?t=795577 69 C10 shortbed stepside 400 small block - built like what a super sport truck could have been 69 K20 lwb TBI 350 4L60E NP208 14-bolt Dana-44 w/disc 68 Camaro SS / RS 500hp 439 inch roller cam big block 4L80E 79 Malibu TPI 350 4L60 w/ Z28 steering & sway bars

12-19-2009, 04:53 PM	#12
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,291	Re: will full-length headers clear? Also i know for fact these fit too but o thought Dbmx66 wanted full length. "Patriot Exhaust H8021-1 - Patriot Clippster Headers" Last edited by KQQL IT; 12-19-2009 at 05:07 PM. Reason: afterthought

12-19-2009, 05:26 PM	#13
mrnize Registered User Join Date: Dec 2009 Location: Sacramento Ca Posts: 50	Re: will full-length headers clear? The front end is stock, minus the coils being cut, no lowering spindles? Oil pan is a beauty though

12-19-2009, 06:31 PM	#15
3r!c84 Badass Join Date: Jan 2009 Location: lox. fl Posts: 4,586	Re: will full-length headers clear? i use to work at moroso speedway (before it was pbir) got a bunch of nice moroso parts before they closed the track __________________ Think outside the box? -84c10 (1stcar)→My Build← -00 Saturn 5spd drop a gear and disappear! 1/4:13:90



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.