3/4 4x4 question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dmartin1 · 01-04-2010, 02:09 AM

does anyone know what the front and rear axel on a 1979 3/4 chevy 4x4 camper special are?

or do you need some pics?

i know the rear is some 14 bolt

wildwilly4x4 · 01-04-2010, 02:49 AM

Probably a 14 full float rear and 10 bolt front. I have heard of some 3/4 having a 44 in front, but my experience has been that most after '78 were 10 bolts. Doesnt matter much though, they are pretty equal in strength.

**special-K** · 01-04-2010, 08:13 AM

Got a picture of your front axle?No doubt about the rear.

dmartin1 · 01-10-2010, 10:20 PM

is the 14 bolt rearend posi?
sorry,im not very good at axel stuff.haha

b454rat · 01-10-2010, 11:24 PM

Look in the glovebox or under the hood for the RPO codes. Look for G80, that will be a Govlok. If that ain't there, pop the cover and take a look. If you see spider gears, it's open, and if you can't really see inside, then it's a Govlok.

As already stated, could be a Dana 44 or a Corp. 10 bolt. Same strength either way. Dana will have a stop sign sorta shape to it, 10 bolt will have almost a round cover. Also 10 bolt will have 2 tabs at 5 and 7 o'clock positions.

geremy · 01-10-2010, 11:30 PM

does your reand have four bolt holding the front pinion bearing in now your front end is cover smoothe or does it have ahump in it

dmartin1 · 01-11-2010, 02:17 AM

the front has a hump in it...on one side it has the big lump in the case.

ill check about that rearend tomorrow.
thanks for all the info!

so if it says gp80 or whatever its posi?

**special-K** · 01-11-2010, 07:02 AM

Yes,posi.I`m willing to bet it`s a Dana44 in a heavied up pre-80 K/20.To avoid confusion I call the rear a rear,same as a 2wd.I call the front axle...what I just said.The full name is front drive axle,but we can assume it`s a drive axle when we`re talking 4wd.I might say front end also.We use "rear" in place of differential.That works on 2wd w/1 drive axle/differential (in the rear).Front differential works well for referring to the front end.

**hatzie** · 01-13-2010, 09:24 PM

Quote:

Originally Posted by dmartin1

does anyone know what the front and rear axle on a 1979 3/4 Chevy 4x4 camper special are?

or do you need some pics?

i know the rear is some 14 bolt

I have a 76 K20 Camper Special with Dana 44 in front and 14bolt FF rear.

Google "Axle ID". The first two pages in the list will tell you what you have.

cobinder · 01-15-2010, 12:11 AM

my 80 K20 has a 44 and a 14 bolt

Sub-versive · 01-15-2010, 02:54 AM

Quote:

Originally Posted by hatzie

I have a 76 K20 Camper Special with Dana 44 in front and 14bolt FF rear.

Google "Axle ID". The first two pages in the list will tell you what you have.

x2

01-04-2010, 02:09 AM	#1
dmartin1 Registered User Join Date: Aug 2008 Location: mohave valley,arizona Posts: 1,088	3/4 4x4 question does anyone know what the front and rear axel on a 1979 3/4 chevy 4x4 camper special are? or do you need some pics? i know the rear is some 14 bolt __________________ 1969 Shortbed in progress 1982 short step, few suspension and motor upgrades.getting a 468 1978 Shortbed fleet side bonanza fully loaded 1978 k20 Silverado loaded.currently engine-less 1989 k10 suburban 9" lift 65 nova And more

01-04-2010, 02:49 AM	#2
wildwilly4x4 Registered User Join Date: Aug 2009 Location: Sunray,TX Posts: 251	Re: 3/4 4x4 question Probably a 14 full float rear and 10 bolt front. I have heard of some 3/4 having a 44 in front, but my experience has been that most after '78 were 10 bolts. Doesnt matter much though, they are pretty equal in strength.

01-04-2010, 08:13 AM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 3/4 4x4 question Got a picture of your front axle?No doubt about the rear. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-10-2010, 10:20 PM	#4
dmartin1 Registered User Join Date: Aug 2008 Location: mohave valley,arizona Posts: 1,088	Re: 3/4 4x4 question is the 14 bolt rearend posi? sorry,im not very good at axel stuff.haha __________________ 1969 Shortbed in progress 1982 short step, few suspension and motor upgrades.getting a 468 1978 Shortbed fleet side bonanza fully loaded 1978 k20 Silverado loaded.currently engine-less 1989 k10 suburban 9" lift 65 nova And more

01-10-2010, 11:24 PM	#5
b454rat Senior Member Join Date: May 2004 Location: Binghamton, NY Posts: 3,469	Re: 3/4 4x4 question Look in the glovebox or under the hood for the RPO codes. Look for G80, that will be a Govlok. If that ain't there, pop the cover and take a look. If you see spider gears, it's open, and if you can't really see inside, then it's a Govlok. As already stated, could be a Dana 44 or a Corp. 10 bolt. Same strength either way. Dana will have a stop sign sorta shape to it, 10 bolt will have almost a round cover. Also 10 bolt will have 2 tabs at 5 and 7 o'clock positions. __________________ 2000 GMC CCSB 454/4L80 6” lift SAS 1999 Chevy CCSB 454/NV4500 4” SAS 1999 GMC Yukon 350/4L60 6" SAS

01-10-2010, 11:30 PM	#6
geremy Registered User Join Date: Jan 2010 Location: petaluma ca Posts: 15	Re: 3/4 4x4 question does your reand have four bolt holding the front pinion bearing in now your front end is cover smoothe or does it have ahump in it

01-11-2010, 02:17 AM	#7
dmartin1 Registered User Join Date: Aug 2008 Location: mohave valley,arizona Posts: 1,088	Re: 3/4 4x4 question the front has a hump in it...on one side it has the big lump in the case. ill check about that rearend tomorrow. thanks for all the info! so if it says gp80 or whatever its posi? __________________ 1969 Shortbed in progress 1982 short step, few suspension and motor upgrades.getting a 468 1978 Shortbed fleet side bonanza fully loaded 1978 k20 Silverado loaded.currently engine-less 1989 k10 suburban 9" lift 65 nova And more

01-11-2010, 07:02 AM	#8
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 3/4 4x4 question Yes,posi.I`m willing to bet it`s a Dana44 in a heavied up pre-80 K/20.To avoid confusion I call the rear a rear,same as a 2wd.I call the front axle...what I just said.The full name is front drive axle,but we can assume it`s a drive axle when we`re talking 4wd.I might say front end also.We use "rear" in place of differential.That works on 2wd w/1 drive axle/differential (in the rear).Front differential works well for referring to the front end. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-15-2010, 12:11 AM	#10
cobinder Everything is work in progress Join Date: Apr 2006 Location: Denver Colorado Posts: 326	Re: 3/4 4x4 question my 80 K20 has a 44 and a 14 bolt __________________ Good luck with your truck! How much?! It's just an old truck part!! 49 International on a 80 GMC 3/4ton 4x4 chassis 48 International KB-5 2 ton dump bed 04 Honda CRF "500" 09 Honda CRF450 fuel injected rocket 03 Suzuki hayabusa carbonfiber wheeled monster. 02 Ford diesel stretch van (toy hauler) 01 38' Monaco diesel pusher motorhome



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.