Tme for a new tranny... 700r4 questions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

steves1967 · 01-26-2003, 03:07 AM

I changed the fluid in my TH350 today, it had enough copper in the pan to make a new penny! I noticed the tranny slipping awhile ago...anyway I'm going to go with a 700r4 but what type?? Lock-up, non lock up, computer controlled.... I 've got a carbuerated 71- 3/4 ton long bed. I need some suggestions and some help- I tow my 67 firebird drag car to the track alot so the tranny has to be strong... Thanks for the help

crazy4chevs · 01-26-2003, 03:33 AM

Heres a place that might help you out. WWW.JETCHIP.COM good luck

breeh · 01-26-2003, 03:47 AM

I would suggest doing a search of this site. This topic has been covered a lot. Good luck!

68 with 350 TPI · 01-26-2003, 01:57 PM

I build my own but if you dont go here...
www.700r4.com

Very good heavy duty parts that will hold up to towing.
I use a lot of their stuff.

mtdave2 · 01-26-2003, 03:43 PM

just do it right, get the best one possible and be sure to put it in perfectly. there is no room for errors.. i dont like them for that reason.

when they work they are aswome. but the fail rate on these are way to high.

Longhorn Man · 01-26-2003, 04:57 PM

Also, since you tow or a regular basis, talk to a good tranny rebuilder. These things are not known for living very long when the trailer hitch is used alot.

01-26-2003, 03:07 AM	#1
steves1967 Registered User Join Date: Dec 2001 Location: Manteca, Ca USA Posts: 305	Tme for a new tranny... 700r4 questions I changed the fluid in my TH350 today, it had enough copper in the pan to make a new penny! I noticed the tranny slipping awhile ago...anyway I'm going to go with a 700r4 but what type?? Lock-up, non lock up, computer controlled.... I 've got a carbuerated 71- 3/4 ton long bed. I need some suggestions and some help- I tow my 67 firebird drag car to the track alot so the tranny has to be strong... Thanks for the help

01-26-2003, 03:33 AM	#2
crazy4chevs Registered User Join Date: Oct 2002 Location: Des Moines WA. (Kent, area) Posts: 668	Heres a place that might help you out. WWW.JETCHIP.COM good luck __________________ 70 chev c10 swb fleet 72 grill, sb 400, 2/4 drop. 68 chev c10 swb fleet Early classic 4/6 drop with 4wheel disc brakes 9"rear 67-8 buckets tilt and A/C Classic GM Truck Club of Washington .

01-26-2003, 03:47 AM	#3
breeh Recovering 67-72 Addict Join Date: Oct 2000 Location: North Bend, WA Posts: 1,788	I would suggest doing a search of this site. This topic has been covered a lot. Good luck! __________________ 68 Short Fleet 4x4; 427; BTO Level 3 700R4; NP205; Dana 60 front and rear; 4" lift with 35's; Disc brakes; AGR variable ratio steering; factory bucket seats; factory tach and tilt. "Friends call me cruzer cuz I like fast cars and fast women"

01-26-2003, 01:57 PM	#4
68 with 350 TPI Registered User Join Date: May 2002 Location: Wingate NC Posts: 456	I build my own but if you dont go here... www.700r4.com Very good heavy duty parts that will hold up to towing. I use a lot of their stuff. __________________ Life is good with a 6-71 supercharged 355 in a 72 camaro

01-26-2003, 03:43 PM	#5
mtdave2 newly minted old timer Join Date: Dec 1999 Location: Hudson WI Posts: 3,521	just do it right, get the best one possible and be sure to put it in perfectly. there is no room for errors.. i dont like them for that reason. when they work they are aswome. but the fail rate on these are way to high. __________________ ____________________________________________ 72 c20 longhorn 65k org miles and counting! 69 k10 Suburban

01-26-2003, 04:57 PM	#6
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Also, since you tow or a regular basis, talk to a good tranny rebuilder. These things are not known for living very long when the trailer hitch is used alot.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.