NJ 3" Dual Flowmaster Exhaust - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Wild83C10 · 01-07-2010, 04:45 PM

I am selling the 3" Dual exhaust that I put together for my truck. I used the flowmaster universal kit which includes mandrel bent tubing. The exhaust will connect to Hedman long tube headers on a SBC. I have a set of headers that I will sell with the exhaust if needed. It will include either Flowmaster Super 40 mufflers or Delta 40 mufflers. The supper 40s are a slight bit louder but you hear a bit more resonance (drone) in the cab when cruising. The delta 40s don't have the resonance but are longer. There are catalytic converters installed. However they are cleaned out and the tubing goes straight through. So it's just the shells of the cats. The overall length is 121" from the front of the collector flange to the tip of the turndown. I don't know if the exhaust will clear the stock trans crossmember. I would most likely think it doesn't. I can provide some tubing with flanges on the end to make a crossmember otherwise a porterbuilt crossmember should work. I am installing a turbo and will be running a 4" or 5" single downpipe so I no longer need this exhaust.

Pick up only

Full exhaust with headers: $310

51 68CHEVY · 01-09-2010, 12:29 PM

Put me inline .i have a guy suposed to by a 350 from me for 250 on wed. If he comes through i'm very interested i bought your frt, susp. From you gary. ARE THEY ABLE TO COME APART TO MAKE ALITTLE SHORTER

Wild83C10 · 01-09-2010, 03:25 PM

Hey Gary,
They do come apart at the muffler which cuts them in half. Each section would be about 55" long which should fit in the back of your PT.

51 68CHEVY · 01-10-2010, 02:58 PM

Thats good i'll call you or email on thur. To set up a time over weedend. Thanks

51 68CHEVY · 01-15-2010, 06:26 PM

joe i have to pass right now had some unexpected bills come up . i'll keep checking to see if you sold it.

TwoFiftyShifter · 01-16-2010, 10:10 AM

This wouldn't work on a 4X4 would it?

Wild83C10 · 01-16-2010, 10:47 AM

Quote:

Originally Posted by TwoFiftyShifter

This wouldn't work on a 4X4 would it?

I'm not sure. I guess it would depend on where the tranfer case sits.

Wild83C10 · 01-20-2010, 08:37 PM

Any other interest? Make some offers.

Wild83C10 · 02-03-2010, 10:01 PM

Still not interest? I am entertaining offers.

51 68CHEVY · 02-06-2010, 03:17 PM

joe i'm still interested if you still have them in a couple wks. i'll contact you maybe i can work something out. thanks gary

Wild83C10 · 02-27-2010, 09:29 PM

Updated price. The headers alone are almost $300.

01-07-2010, 04:45 PM	#1
Wild83C10 Registered User Join Date: May 2002 Location: NJ Posts: 910	3" Dual Flowmaster Exhaust I am selling the 3" Dual exhaust that I put together for my truck. I used the flowmaster universal kit which includes mandrel bent tubing. The exhaust will connect to Hedman long tube headers on a SBC. I have a set of headers that I will sell with the exhaust if needed. It will include either Flowmaster Super 40 mufflers or Delta 40 mufflers. The supper 40s are a slight bit louder but you hear a bit more resonance (drone) in the cab when cruising. The delta 40s don't have the resonance but are longer. There are catalytic converters installed. However they are cleaned out and the tubing goes straight through. So it's just the shells of the cats. The overall length is 121" from the front of the collector flange to the tip of the turndown. I don't know if the exhaust will clear the stock trans crossmember. I would most likely think it doesn't. I can provide some tubing with flanges on the end to make a crossmember otherwise a porterbuilt crossmember should work. I am installing a turbo and will be running a 4" or 5" single downpipe so I no longer need this exhaust. Pick up only Full exhaust with headers: $310 __________________ 83 C10 Stepside (SOLD, it was a blast!) 383 MASS-FLO EFI/TKO II 600/3.90 Posi 10 bolt S475 and C4 DM running, fine tuning turbo= Douchebag Racing: Runs Fine all the Time Last edited by Wild83C10; 02-27-2010 at 09:29 PM.

01-09-2010, 12:29 PM	#2
51 68CHEVY Registered User Join Date: Feb 2005 Location: ATCO N.J. Posts: 536	Re: 3" Dual Flowmaster Exhaust Put me inline .i have a guy suposed to by a 350 from me for 250 on wed. If he comes through i'm very interested i bought your frt, susp. From you gary. ARE THEY ABLE TO COME APART TO MAKE ALITTLE SHORTER Last edited by 51 68CHEVY; 01-09-2010 at 12:30 PM.

01-09-2010, 03:25 PM	#3
Wild83C10 Registered User Join Date: May 2002 Location: NJ Posts: 910	Re: 3" Dual Flowmaster Exhaust Hey Gary, They do come apart at the muffler which cuts them in half. Each section would be about 55" long which should fit in the back of your PT. __________________ 83 C10 Stepside (SOLD, it was a blast!) 383 MASS-FLO EFI/TKO II 600/3.90 Posi 10 bolt S475 and C4 DM running, fine tuning turbo= Douchebag Racing: Runs Fine all the Time

01-10-2010, 02:58 PM	#4
51 68CHEVY Registered User Join Date: Feb 2005 Location: ATCO N.J. Posts: 536	Re: 3" Dual Flowmaster Exhaust Thats good i'll call you or email on thur. To set up a time over weedend. Thanks

01-15-2010, 06:26 PM	#5
51 68CHEVY Registered User Join Date: Feb 2005 Location: ATCO N.J. Posts: 536	Re: 3" Dual Flowmaster Exhaust joe i have to pass right now had some unexpected bills come up . i'll keep checking to see if you sold it.

01-16-2010, 10:10 AM	#6
TwoFiftyShifter Registered User Join Date: Nov 2008 Location: Gwinnett GA Posts: 1,803	Re: 3" Dual Flowmaster Exhaust This wouldn't work on a 4X4 would it? __________________ 1982 K10 SWB 1987 V20 - Sold - Doh!

01-20-2010, 08:37 PM	#8
Wild83C10 Registered User Join Date: May 2002 Location: NJ Posts: 910	Re: 3" Dual Flowmaster Exhaust Any other interest? Make some offers. __________________ 83 C10 Stepside (SOLD, it was a blast!) 383 MASS-FLO EFI/TKO II 600/3.90 Posi 10 bolt S475 and C4 DM running, fine tuning turbo= Douchebag Racing: Runs Fine all the Time

02-03-2010, 10:01 PM	#9
Wild83C10 Registered User Join Date: May 2002 Location: NJ Posts: 910	Re: 3" Dual Flowmaster Exhaust Still not interest? I am entertaining offers. __________________ 83 C10 Stepside (SOLD, it was a blast!) 383 MASS-FLO EFI/TKO II 600/3.90 Posi 10 bolt S475 and C4 DM running, fine tuning turbo= Douchebag Racing: Runs Fine all the Time

02-06-2010, 03:17 PM	#10
51 68CHEVY Registered User Join Date: Feb 2005 Location: ATCO N.J. Posts: 536	Re: 3" Dual Flowmaster Exhaust joe i'm still interested if you still have them in a couple wks. i'll contact you maybe i can work something out. thanks gary

02-27-2010, 09:29 PM	#11
Wild83C10 Registered User Join Date: May 2002 Location: NJ Posts: 910	Re: 3" Dual Flowmaster Exhaust Updated price. The headers alone are almost $300. __________________ 83 C10 Stepside (SOLD, it was a blast!) 383 MASS-FLO EFI/TKO II 600/3.90 Posi 10 bolt S475 and C4 DM running, fine tuning turbo= Douchebag Racing: Runs Fine all the Time



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.