MO 79 Silverado and more - The 1947 - Present Chevrolet & GMC Truck Message Board Network

xrcr · 01-08-2010, 01:42 PM

Ok I have alot of oddball stuff figured I'd see if anyone needed it. I'll post pictures if anyone is interested.

79 Factory air,I do not have the compressor,just condensor. Vacumn pods are good, all vent work,wiring, control, came off a donor so don't know any history 50.00 + ship

79 Brake pedal assembly (auto) 25.00 + ship

79 inside cab hood latch assembly. This is the top panel that goes on core support, latch assembly, support,cable (might need a pic for this) 25.00+ship

76 clutch/brake pedal assembly 25.00+ship
I also have the flywheel, bell housing and linkage if needed.

79 interior trim for headliner but missing lft side A pillar piece. Not show quality but decent. 20.00+ ship

79 glove box and ash tray assembly 20.00 + ship

84 wiring harness for electric windows 15.00 + ship

I have a lot of other things that may be of use to someone just ask. I'm dealing with 3 donor cabs/truck.
Payment will need to be money order or maybe someone can explain how I can get a Pay Pal acct.
Thanks,
JIM

nu2-72 · 01-08-2010, 03:43 PM

any chance there is a 3/4 front 4x4 axle there?

xrcr · 01-08-2010, 04:54 PM

Sorry all 2wd

Conroe trucker · 01-26-2010, 11:01 PM

Looking for a clean set of Ralley trim rings.........

Jonboy · 01-27-2010, 09:58 AM

Jim, what would shipping be on the upper radiator support panel and such to a business address in 75115? I need the corresponding bracket thet bolts to the hood too (I think I might have one if yours is gone).

xrcr · 01-27-2010, 10:20 AM

The trim rings I have are on a 83 1/2 ton not sure if that's what you want

I'll get a pic and post tomorrow of those and the Hood latch parts

xrcr · 01-28-2010, 08:56 AM

Jonboy, is this what you want or is it the piece that bolts to this that hold the top of radiator.

Conroe These are the rings. I'd say driver quality, might not be what you need anyway

Jonboy · 01-28-2010, 11:59 AM

That's what I am looking for. The pull down on the hood corresponds to the hood latch. It should be square, and have a ring that catches the hood latch. I need all of that.

xrcr · 01-28-2010, 12:52 PM

I should have it, I just need to locate it. I'll dig through my "inventory" and let you know asap.

Leftyarmstrong · 01-28-2010, 11:26 PM

Looking for a flywheel. Small block two piece main type. Clutch size 10 1/2 inches or greater. Clutch face in good enough condition to resurface. Thanks

joe231 · 01-29-2010, 05:11 PM

do you have a good driver's side b-pillar trim piece? what color? how much shipped to 73071? pics?

xrcr · 02-01-2010, 08:50 AM

Joe231 here's the piece 25.00 shipped. I have everything except for the Drivers side A-post piece if interested.

Jonboy this is what you need, right?,Need to tell you the release cable is junk, I don't know if you can replace the cable or not. Shipping down there is around 25.00 UPS

joe231 · 02-01-2010, 10:40 AM

Ok, thanks
I'll pass

Jonboy · 02-01-2010, 10:51 AM

That's the one. I'll take them. I will send you a PM with my address. I do have a release cable, so don't worry about that.

Edit: Jim, I think I have found one locally. If it falls through, I will let you know. If someone else needs it, go ahead.

bikes&bowties · 02-01-2010, 10:32 PM

I am interested in the clutch linkage. Will let you know ASAP

bikes&bowties · 02-14-2010, 01:21 AM

PM sent

xrcr · 02-18-2010, 10:39 AM

Bikes and Bowties, is this it?

jdaley · 02-22-2010, 08:12 PM

I am interested in purchasing the inside hood fitments. Would it be possible to cut the top grill bar so its smaller to send to Australia, Thank you

19jake91 · 02-23-2010, 11:59 AM

Is the wiring harness for power windows still available? Do you have a picture of it?

68Timber · 02-23-2010, 12:47 PM

79 inside cab hood latch assembly. This is the top panel that goes on core support, latch assembly, support,cable (might need a pic for this) 25.00+ship

If you still have it I'll take it. Is the interior hood release not included?

xrcr · 02-23-2010, 02:14 PM

Bruiser The cable is pulled loose from the plastic housing. You can have it but
I think it is junk. I'm in Nebraska until
March 1 will get back to you then

xrcr · 03-01-2010, 01:10 PM

19Jake91, Jdaley, Brusier and Bikes and Bowties.Here's pics that will help on the clutch and harness issues. I figure the harness is worth 25.00 plus ship. it should be able to go USPS so it won't be much.Jdaley, I'd rather put that in a long skinny box instead of cutting it... your call. Brusier let me know. PM me what ?s I haven't answered. Also i do have a paypal acct. Here's the deal I have only bought stuff with it does it matter. I should be able to sell through it too anybody know/

GMCMG · 03-01-2010, 08:08 PM

Do you have a power steering gear box? I need 1980 up, I think.

68Timber · 03-02-2010, 11:09 AM

Quote:

Originally Posted by BRUISER

79 inside cab hood latch assembly. This is the top panel that goes on core support, latch assembly, support,cable (might need a pic for this) 25.00+ship

If you still have it I'll take it. Is the interior hood release not included?

I'll take it. PM me paypal info.

Thanks.

86 Rado · 03-04-2010, 09:39 PM

Hijacking a second thread is not going to work either.....

You may respond to a post specifically listing the item you need, but you cannot make requests. That constitutes a "WTB" (Want To Buy) which along with "FS" (For Sale) is against the rules for non-subscribing members.

01-08-2010, 01:42 PM	#1
xrcr Registered User Join Date: Dec 2008 Location: Foristell, MO Posts: 418	79 Silverado and more Ok I have alot of oddball stuff figured I'd see if anyone needed it. I'll post pictures if anyone is interested. 79 Factory air,I do not have the compressor,just condensor. Vacumn pods are good, all vent work,wiring, control, came off a donor so don't know any history 50.00 + ship 79 Brake pedal assembly (auto) 25.00 + ship 79 inside cab hood latch assembly. This is the top panel that goes on core support, latch assembly, support,cable (might need a pic for this) 25.00+ship 76 clutch/brake pedal assembly 25.00+ship I also have the flywheel, bell housing and linkage if needed. 79 interior trim for headliner but missing lft side A pillar piece. Not show quality but decent. 20.00+ ship 79 glove box and ash tray assembly 20.00 + ship 84 wiring harness for electric windows 15.00 + ship I have a lot of other things that may be of use to someone just ask. I'm dealing with 3 donor cabs/truck. Payment will need to be money order or maybe someone can explain how I can get a Pay Pal acct. Thanks, JIM

01-08-2010, 03:43 PM	#2
nu2-72 Senior Member Join Date: Apr 2001 Location: Amazonia, Mo. USA Posts: 2,821	Re: 79 Silverado and more any chance there is a 3/4 front 4x4 axle there? __________________ 72 3/4 4x4 350 4spd 72 3/4 4x4 350 auto 2004 Duramax Silverado 4x4 2006 Duramax Crew cab 4x4 2010 Harley Ultra Limited 2011 Harley Street Glide

01-08-2010, 04:54 PM	#3
xrcr Registered User Join Date: Dec 2008 Location: Foristell, MO Posts: 418	Re: 79 Silverado and more Sorry all 2wd

01-26-2010, 11:01 PM	#4
Conroe trucker SWBs: 67 2x4, 67 4x4, 70 4x4 Join Date: Nov 2007 Location: Conroe, TX Posts: 483	Re: 79 Silverado and more Looking for a clean set of Ralley trim rings......... __________________ FINISHED Project thread: 67 SWB 4x4 FINISHED Project thread: 67 SWB 6 cyl cruiser Project thread: Road Toad 70 SWB Step, 4x4, 292, 3OT 01 C5 convertable 08 Z06

01-27-2010, 09:58 AM	#5
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: 79 Silverado and more Jim, what would shipping be on the upper radiator support panel and such to a business address in 75115? I need the corresponding bracket thet bolts to the hood too (I think I might have one if yours is gone). __________________ 1974 Jimmy- 5.3/4L80e/NP241

01-27-2010, 10:20 AM	#6
xrcr Registered User Join Date: Dec 2008 Location: Foristell, MO Posts: 418	Re: 79 Silverado and more The trim rings I have are on a 83 1/2 ton not sure if that's what you want I'll get a pic and post tomorrow of those and the Hood latch parts

01-28-2010, 08:56 AM	#7
xrcr Registered User Join Date: Dec 2008 Location: Foristell, MO Posts: 418	Re: 79 Silverado and more Jonboy, is this what you want or is it the piece that bolts to this that hold the top of radiator. Conroe These are the rings. I'd say driver quality, might not be what you need anyway Attached Images

01-28-2010, 11:59 AM	#8
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: 79 Silverado and more That's what I am looking for. The pull down on the hood corresponds to the hood latch. It should be square, and have a ring that catches the hood latch. I need all of that. __________________ 1974 Jimmy- 5.3/4L80e/NP241

01-28-2010, 12:52 PM	#9
xrcr Registered User Join Date: Dec 2008 Location: Foristell, MO Posts: 418	Re: 79 Silverado and more I should have it, I just need to locate it. I'll dig through my "inventory" and let you know asap.

01-28-2010, 11:26 PM	#10
Leftyarmstrong Registered User Join Date: Jul 2009 Location: Huntington Beach, Ca. Posts: 17	Re: 79 Silverado and more Looking for a flywheel. Small block two piece main type. Clutch size 10 1/2 inches or greater. Clutch face in good enough condition to resurface. Thanks

01-29-2010, 05:11 PM	#11
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: 79 Silverado and more do you have a good driver's side b-pillar trim piece? what color? how much shipped to 73071? pics? __________________ *CHEVY ONLY* Last edited by joe231; 01-29-2010 at 05:11 PM.

02-01-2010, 08:50 AM	#12
xrcr Registered User Join Date: Dec 2008 Location: Foristell, MO Posts: 418	Re: 79 Silverado and more Joe231 here's the piece 25.00 shipped. I have everything except for the Drivers side A-post piece if interested. Jonboy this is what you need, right?,Need to tell you the release cable is junk, I don't know if you can replace the cable or not. Shipping down there is around 25.00 UPS Attached Images

02-01-2010, 10:40 AM	#13
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: 79 Silverado and more Ok, thanks I'll pass __________________ *CHEVY ONLY*

02-01-2010, 10:51 AM	#14
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: 79 Silverado and more That's the one. I'll take them. I will send you a PM with my address. I do have a release cable, so don't worry about that. Edit: Jim, I think I have found one locally. If it falls through, I will let you know. If someone else needs it, go ahead. __________________ 1974 Jimmy- 5.3/4L80e/NP241 Last edited by Jonboy; 02-02-2010 at 11:08 AM.

02-01-2010, 10:32 PM	#15
bikes&bowties Registered User Join Date: May 2009 Location: Washington Posts: 663	Re: 79 Silverado and more I am interested in the clutch linkage. Will let you know ASAP



Register or Log In To remove these advertisements.

02-14-2010, 01:21 AM	#16
bikes&bowties Registered User Join Date: May 2009 Location: Washington Posts: 663	Re: 79 Silverado and more PM sent

02-18-2010, 10:39 AM	#17
xrcr Registered User Join Date: Dec 2008 Location: Foristell, MO Posts: 418	Re: 79 Silverado and more Bikes and Bowties, is this it? Attached Images

02-22-2010, 08:12 PM	#18
jdaley Registered User Join Date: Dec 2009 Location: Melbourne, Australia Posts: 71	Re: 79 Silverado and more I am interested in purchasing the inside hood fitments. Would it be possible to cut the top grill bar so its smaller to send to Australia, Thank you __________________ John Daley Melbourne, Australia 1946 Chev Ute 1977 Chev Tray Road racing sidecars

02-23-2010, 11:59 AM	#19
19jake91 Registered User Join Date: Mar 2009 Location: Center Valley, Pa Posts: 4	Re: 79 Silverado and more Is the wiring harness for power windows still available? Do you have a picture of it?

02-23-2010, 12:47 PM	#20
68Timber I know the pieces fit Join Date: Nov 2007 Location: MONTGOMERY, AL Posts: 5,523	Re: 79 Silverado and more 79 inside cab hood latch assembly. This is the top panel that goes on core support, latch assembly, support,cable (might need a pic for this) 25.00+ship If you still have it I'll take it. Is the interior hood release not included? __________________ John 79 2wd Blazer (Bruiser) 85 M1009 Blazer (Sarge) build 74 Honda Z50 build

02-23-2010, 02:14 PM	#21
xrcr Registered User Join Date: Dec 2008 Location: Foristell, MO Posts: 418	Re: 79 Silverado and more Bruiser The cable is pulled loose from the plastic housing. You can have it but I think it is junk. I'm in Nebraska until March 1 will get back to you then

03-01-2010, 01:10 PM	#22
xrcr Registered User Join Date: Dec 2008 Location: Foristell, MO Posts: 418	Re: 79 Silverado and more 19Jake91, Jdaley, Brusier and Bikes and Bowties.Here's pics that will help on the clutch and harness issues. I figure the harness is worth 25.00 plus ship. it should be able to go USPS so it won't be much.Jdaley, I'd rather put that in a long skinny box instead of cutting it... your call. Brusier let me know. PM me what ?s I haven't answered. Also i do have a paypal acct. Here's the deal I have only bought stuff with it does it matter. I should be able to sell through it too anybody know/ Attached Images

03-01-2010, 08:08 PM	#23
GMCMG Registered User Join Date: Nov 2009 Location: Center, MO Posts: 121	Re: 79 Silverado and more Do you have a power steering gear box? I need 1980 up, I think. __________________ GMCMG 1964 GMC 1/2 ton LWB project - 1982 GMC 6.2 diesel engine/suspension donor - 1966 Chevy 3/4 ton frame/doors/fenders donor - tons of parts - cause you can't build a truck without 4 of everything! 2001 3/4HD Duramax Diesel extended cab lwb4x4 1984 Chevy C30 6.2 diesel lift truck (project) 1962 GMC w/5 lugs, 350/350 auto (was for parts, but couldn't bring myself to do it!) glascock.m@hotmail.com

03-04-2010, 09:39 PM	#25
86 Rado Registered User Join Date: Feb 2010 Location: Anderson, Indiana Posts: 33	Re: 79 Silverado and more Hijacking a second thread is not going to work either..... You may respond to a post specifically listing the item you need, but you cannot make requests. That constitutes a "WTB" (Want To Buy) which along with "FS" (For Sale) is against the rules for non-subscribing members. __________________ 09 Black Challenger R/T 90 Scottsdale shortbed 4x4 71 Impala Custom Last edited by LONGHAIR; 03-05-2010 at 08:24 AM.

Register or Log In To remove these advertisements.