Door Gap - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tap500 · 01-25-2010, 11:59 PM

I need some info about the door gaps. The aft end of both of my doors is too large after doing all the metal work on the lower section of the cab (lower f/r pillars, outer floors, cab corners, kick panels) I have waited to put the rockers in until I got some good doors. With the doors on the aft door gap is too large.

How do I adjust the rear door gap, with shims behind the hinges?

Bruce88 · 01-26-2010, 07:29 AM

On my drivers side I used shims behind the hinges to get the door gap I wanted.
You can see the shims I made on my build thread (post #195) http://67-72chevytrucks.com/vboard/s...=318544&page=8

01-26-2010, 07:29 AM	#2
Bruce88 Registered User Join Date: Oct 2008 Location: Everett, WA Posts: 326	Re: Door Gap On my drivers side I used shims behind the hinges to get the door gap I wanted. You can see the shims I made on my build thread (post #195) http://67-72chevytrucks.com/vboard/s...=318544&page=8 __________________ My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=318544

01-25-2010, 11:59 PM	#1
tap500 Registered User Join Date: Jul 2009 Location: Farmington CT Posts: 41	Door Gap I need some info about the door gaps. The aft end of both of my doors is too large after doing all the metal work on the lower section of the cab (lower f/r pillars, outer floors, cab corners, kick panels) I have waited to put the rockers in until I got some good doors. With the doors on the aft door gap is too large. How do I adjust the rear door gap, with shims behind the hinges?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.