Got a 2000 4.3 s10 to part out - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jmedero · 01-28-2010, 05:09 PM

I did not see a parts section for s10's. Did I miss it? I have a wrecked 2000 4.3 s10 truck to sell or part out. It has a tauneu cover and nice interior with console. It was wrecked and had no insurance. Let me know were I can post it at

**old Rusty C10** · 01-29-2010, 09:39 PM

can you post pics? what color? I will mention to the staff here about the parts board

BarryB · 01-29-2010, 10:11 PM

I'm possibly interested in the console, pending price, shipping and pics of course.

**old Rusty C10** · 01-29-2010, 11:07 PM

I prolly shoulda mentioned that i was interested in the console. tonneau cover,also if it has power accessories i may be interested in some of those

68C15 · 01-29-2010, 11:15 PM

what color and was it hit in the front?

jmedero · 01-29-2010, 11:29 PM

I got plenty of pics. I will post a little later on. I am at magic kingdom right now with the fam at Disney. It is dark blue, light gray int. Hit front pass side. Damage to ft clip and pass side door.

**old Rusty C10** · 01-29-2010, 11:47 PM

when ya see goofy and dumbo say hello to my ex wife's family for me I aint seen em since the divorce!

jmedero · 01-30-2010, 02:47 PM

ok here are some pics off of my Iphone of the truck. I got it last week to part out and I should be able to start pulling stuff off this week. Let me know if anyone has any questions.

gchemist · 01-30-2010, 10:45 PM

If you were closer, I would take the entire front seat setup!!

Is the frame damaged? It looks repairable.

jmedero · 01-30-2010, 11:03 PM

Yes very repairable. The wheels are all straight and point the right way, so no frame damage. The hit is above the bumper so it was not hit on the frame horns.

jmedero · 01-30-2010, 11:48 PM

console $100 shipping would be around $20.
gchemist let me see what shakes up here and we might can work something out. I have a customer that drives to Houston quite offten 3 times a month. I might be able to meet half way.. I love road trips.

**old Rusty C10** · 01-31-2010, 12:28 AM

give me an idea of what you would want for the lower part of the front bumper ( plastic part) and the cover ( it is the short bed right? and they only had one short bed that interchanged between a reg cab and a "club" cab?)

jmedero · 01-31-2010, 01:11 AM

$30 for the front valance. The bed cover $175. Shipping is what we would have to figure out on that lid....

gchemist · 01-31-2010, 09:53 PM

Quote:

Originally Posted by jmedero

console $100 shipping would be around $20.
gchemist let me see what shakes up here and we might can work something out. I have a customer that drives to Houston quite offten 3 times a month. I might be able to meet half way.. I love road trips.

The seats in my Jimmy have seen better days. It has a 40/60 split seat. It is considered a 6 passenger SUV. Yea right, how can three adults fit in the front seat? I only work half the week. Meeting halfway between Houston and Austin is possible.

jmedero · 03-07-2010, 01:44 PM

If anyone needs any parts let me know. I am starting to part it out.

dyrt · 12-27-2010, 01:40 PM

Quote:

Originally Posted by jmedero

If anyone needs any parts let me know. I am starting to part it out.

is the bed beat up? it's hard to see, but i am looking for a fuel door assembly and the plastic part inside so i can graft it into my 69 truck. if the bedside is still in good shape and you don't want to cut it up that's understandable. i need a few inches on each side so i have some metal to work with. can i have a picture of it before you cut it you are willing to cut?

Mike

bobwires · 12-27-2010, 07:00 PM

I've got a '97 blazer and I need an engine. Weren't they the same from '97 - '02? but wasn't there an HO version in there some which way?

I assume the engine is alright, but the accessories on the front are all trash.

jmedero · 12-28-2010, 09:59 AM

Its gone guys. Sold it as a whole truck for $650.
Posted via Mobile Device

01-28-2010, 05:09 PM	#1
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Got a 2000 4.3 s10 to part out I did not see a parts section for s10's. Did I miss it? I have a wrecked 2000 4.3 s10 truck to sell or part out. It has a tauneu cover and nice interior with console. It was wrecked and had no insurance. Let me know were I can post it at __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

01-29-2010, 09:39 PM	#2
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,316	Re: Got a 2000 4.3 s10 to part out can you post pics? what color? I will mention to the staff here about the parts board __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!! Last edited by old Rusty C10; 01-29-2010 at 09:39 PM.

01-29-2010, 10:11 PM	#3
BarryB Senior Member Join Date: Jul 2006 Location: Blountville, Tn. Posts: 3,904	Re: Got a 2000 4.3 s10 to part out I'm possibly interested in the console, pending price, shipping and pics of course. __________________ We could learn a lot from crayons... Some are sharp; some are pretty;and some are dull. Some have weird names; and all are different colours;but they all have to live in the same box. You may be only one person in the world, But you may also be the world to one person. * Some mistakes are too much fun to only make once. Two rules in life. 1. Never sweat the small stuff! 2. Everything is small stuff!

01-29-2010, 11:07 PM	#4
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,316	Re: Got a 2000 4.3 s10 to part out I prolly shoulda mentioned that i was interested in the console. tonneau cover,also if it has power accessories i may be interested in some of those __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

01-29-2010, 11:15 PM	#5
68C15 blood type; Retumbo Join Date: Jan 2004 Location: next to my reloading bench Posts: 10,269	Re: Got a 2000 4.3 s10 to part out what color and was it hit in the front?

01-29-2010, 11:29 PM	#6
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: Got a 2000 4.3 s10 to part out I got plenty of pics. I will post a little later on. I am at magic kingdom right now with the fam at Disney. It is dark blue, light gray int. Hit front pass side. Damage to ft clip and pass side door. __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

01-29-2010, 11:47 PM	#7
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,316	Re: Got a 2000 4.3 s10 to part out when ya see goofy and dumbo say hello to my ex wife's family for me I aint seen em since the divorce! __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

01-30-2010, 02:47 PM	#8
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: Got a 2000 4.3 s10 to part out ok here are some pics off of my Iphone of the truck. I got it last week to part out and I should be able to start pulling stuff off this week. Let me know if anyone has any questions. Attached Images __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

01-30-2010, 10:45 PM	#9
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	Re: Got a 2000 4.3 s10 to part out If you were closer, I would take the entire front seat setup!! Is the frame damaged? It looks repairable. __________________ Gerardo a.k.a. Mad Chemist Silverado XST videos

01-30-2010, 11:03 PM	#10
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: Got a 2000 4.3 s10 to part out Yes very repairable. The wheels are all straight and point the right way, so no frame damage. The hit is above the bumper so it was not hit on the frame horns. __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

01-30-2010, 11:48 PM	#11
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: Got a 2000 4.3 s10 to part out console $100 shipping would be around $20. gchemist let me see what shakes up here and we might can work something out. I have a customer that drives to Houston quite offten 3 times a month. I might be able to meet half way.. I love road trips. __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

01-31-2010, 12:28 AM	#12
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,316	Re: Got a 2000 4.3 s10 to part out give me an idea of what you would want for the lower part of the front bumper ( plastic part) and the cover ( it is the short bed right? and they only had one short bed that interchanged between a reg cab and a "club" cab?) __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

01-31-2010, 01:11 AM	#13
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: Got a 2000 4.3 s10 to part out $30 for the front valance. The bed cover $175. Shipping is what we would have to figure out on that lid.... __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

03-07-2010, 01:44 PM	#15
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: Got a 2000 4.3 s10 to part out If anyone needs any parts let me know. I am starting to part it out. __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

12-27-2010, 07:00 PM	#17
bobwires Registered User Join Date: Feb 2010 Location: Ketchikan, AK Posts: 32	Re: Got a 2000 4.3 s10 to part out I've got a '97 blazer and I need an engine. Weren't they the same from '97 - '02? but wasn't there an HO version in there some which way? I assume the engine is alright, but the accessories on the front are all trash.



Register or Log In To remove these advertisements.

12-28-2010, 09:59 AM	#18
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: Got a 2000 4.3 s10 to part out Its gone guys. Sold it as a whole truck for $650. Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

Register or Log In To remove these advertisements.