207 in a fullsize noooooo - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chevy68388 · 02-01-2003, 03:26 AM

ok a buddy of mine thinks there are or were np207s in fullsize pick ups ive seen them in jeeps and s10s thats it never a fullsize

Blazer1970 · 02-03-2003, 09:28 AM

Dodge may have used them in full-size trucks. I know they used NP231s in the newer full-size trucks when GM was using NP241s. There is really not that much difference between a 207 and a 208, or a 231 and a 241.

chevy68388 · 02-03-2003, 08:30 PM

well 207s are only rated for 5000 pound trucks and a 208 is what i have in mine 231 i think replaced the 207

02-01-2003, 03:26 AM	#1
chevy68388 king $h!t Join Date: Jan 2002 Location: spring valley/ohio/usa Posts: 416	207 in a fullsize noooooo ok a buddy of mine thinks there are or were np207s in fullsize pick ups ive seen them in jeeps and s10s thats it never a fullsize __________________ j dawg the 86 allmost done 357/700r4/lifted 9/dana44 front ten bolt rear/3.73 gears/35s

02-03-2003, 09:28 AM	#2
Blazer1970 Registered User Join Date: Dec 1999 Location: Old Mission, MI, USA Posts: 2,507	Dodge may have used them in full-size trucks. I know they used NP231s in the newer full-size trucks when GM was using NP241s. There is really not that much difference between a 207 and a 208, or a 231 and a 241. __________________ Tim

02-03-2003, 08:30 PM	#3
chevy68388 king $h!t Join Date: Jan 2002 Location: spring valley/ohio/usa Posts: 416	well 207s are only rated for 5000 pound trucks and a 208 is what i have in mine 231 i think replaced the 207 __________________ j dawg the 86 allmost done 357/700r4/lifted 9/dana44 front ten bolt rear/3.73 gears/35s



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.