Ahhh Spring is early - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*Piston* · 02-01-2003, 09:12 PM

Great day for a cruise

Today we (Genuine Chevy GMC truck club of KC ) went on a little cruise, actually we started at 10am in Independence, MO and finished up around 4pm in Weston, MO. Took in some great scenery thats for sure.

Anyone in the KC area that would like to join in, feel free to send me or anyone at the club an email. We'd love to have more folks involved.
We had 8 trucks to turn some heads today, what a blast. It was a spur of the moment cruise, hense the reason for only 8... but it was still a great day.

Capitol68 · 02-01-2003, 09:18 PM

good looking Chevy posse

**Tim Christian** · 02-01-2003, 10:19 PM

Those are some GREAT pictures!!!!!!!!!!

teeitup · 02-01-2003, 10:26 PM

Nice pics Garrett, it was a beautiful day around here for Feb. 1st. Them are some nice trucks!!

*Piston* · 02-02-2003, 12:38 AM

Thx. It was almost 65 here today.. supposed to be 70 tomorrow!!! To bad my blue 72 was the ugly duckling of the bunch LOL. Off to the paint booth in a month though WOOHOOO

DanoDMano · 02-02-2003, 12:46 AM

What a great time!!

Us Northwest guy's got to do that sometime.

(In between showers of course!!)

**Yukon Jack** · 02-02-2003, 10:27 AM

Sweet - I would enjoy driving around with a bunch of truck guys - that would be a blast. Hmmm, Wichita to KC isn't too far . . . so what if I would wear off half of my tires

*Piston* · 02-02-2003, 11:20 AM

We have it on the schedule to be in Wichita on the 7th and 8th for the swap meet. I'm not sure if they have space's reserved for the club or if everyone is just driving down to check it out...
I'll hopefully be painting the interior of my 72 this weekend so I wont make it.

**CPNE** · 02-02-2003, 12:11 PM

Spring here too. At least the groundhog isn't seeing his shadow. A shot of lovely NH. I shouldn't complain though most of Jan was clear and sunning albiet -31 to 0 degress the whole time. Pictured are a 72 GMC 3/4 ton 4x4 with plow, 72 Chevy 3/4 ton burb 4x4 and a 71 swb 2wd stepside.

sakohntr · 02-02-2003, 01:24 PM

Did you get your cab back from the body shop. He was sandblasting it for you right? Did you get that stroker assembled for it as well?

casey · 02-02-2003, 01:59 PM

You guys covered all the years, that's one of the coolest pic,s I've ever seen representing the old GM truck years! gotta save that.

*Piston* · 02-02-2003, 02:07 PM

Added a few more pics...

sakohntr
Yep, its just about ready to be sandblasted. I've got to finish the 72 first to make room for the other stuff though. Hopefully I'll be running the 71 later this year.
I just picked up the heads for the 383 but it will be a while before there's anything to put the engine/trans in. LOL

I'll be cutting the frame down to a SWB and bolting a StepSide bed on it

. Should be a fun ride!

02-01-2003, 09:12 PM	#1
Piston Account Suspended Join Date: Oct 2002 Location: Olathe, KS Posts: 2,300	Ahhh Spring is early Great day for a cruise Today we (Genuine Chevy GMC truck club of KC ) went on a little cruise, actually we started at 10am in Independence, MO and finished up around 4pm in Weston, MO. Took in some great scenery thats for sure. Anyone in the KC area that would like to join in, feel free to send me or anyone at the club an email. We'd love to have more folks involved. We had 8 trucks to turn some heads today, what a blast. It was a spur of the moment cruise, hense the reason for only 8... but it was still a great day. Last edited by Piston; 02-02-2003 at 02:03 PM.

02-01-2003, 09:18 PM	#2
Capitol68 Registered User Join Date: Sep 2002 Location: Austin,Tx Posts: 327	good looking Chevy posse __________________ '68 Fleet LWB orig 307 .030 over GM Hei/w Accel Super coil orig. stock TH 400. _______________________ “What we do for ourselves dies with us. What we do for others and the world remains and is immortal.” Albert Pine English author d.1851

02-01-2003, 10:26 PM	#4
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Nice pics Garrett, it was a beautiful day around here for Feb. 1st. Them are some nice trucks!! __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-02-2003, 12:46 AM	#6
DanoDMano Pronounced "Pew-al-up" Join Date: Oct 2002 Location: Puyallup, Washington Posts: 845	What a great time!! Us Northwest guy's got to do that sometime. (In between showers of course!!) __________________ Classic GM Trucks of Washington Club Member 1970 FS chevy,350/350, Edelbrock cam and intake. Holley 650 carb,HEI,AT,Tangier Orange, 18's, Power Locks, Truck Photos

02-02-2003, 10:27 AM	#7
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,689	Sweet - I would enjoy driving around with a bunch of truck guys - that would be a blast. Hmmm, Wichita to KC isn't too far . . . so what if I would wear off half of my tires __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

02-01-2003, 10:19 PM	#3
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,389	Those are some GREAT pictures!!!!!!!!!!

02-02-2003, 12:38 AM	#5
Piston Account Suspended Join Date: Oct 2002 Location: Olathe, KS Posts: 2,300	Thx. It was almost 65 here today.. supposed to be 70 tomorrow!!! To bad my blue 72 was the ugly duckling of the bunch LOL. Off to the paint booth in a month though WOOHOOO

02-02-2003, 11:20 AM	#8
Piston Account Suspended Join Date: Oct 2002 Location: Olathe, KS Posts: 2,300	We have it on the schedule to be in Wichita on the 7th and 8th for the swap meet. I'm not sure if they have space's reserved for the club or if everyone is just driving down to check it out... I'll hopefully be painting the interior of my 72 this weekend so I wont make it.

02-02-2003, 12:11 PM	#9
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,662	Spring here too. At least the groundhog isn't seeing his shadow. A shot of lovely NH. I shouldn't complain though most of Jan was clear and sunning albiet -31 to 0 degress the whole time. Pictured are a 72 GMC 3/4 ton 4x4 with plow, 72 Chevy 3/4 ton burb 4x4 and a 71 swb 2wd stepside. Attached Images __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

02-02-2003, 01:24 PM	#10
sakohntr Registered User Join Date: Mar 2002 Location: Floodwood Minnesota Posts: 1,057	cab Did you get your cab back from the body shop. He was sandblasting it for you right? Did you get that stroker assembled for it as well? __________________ 1967 K30 Napco 292/SM420 original paint 30k miles 1968 K60 Napco 396/5spd. dbl frame 52" michelins 1969 K10 SWB GMC 454/4spd 6" 35's posi,hooks 1972 C30 longhorn,BB/AT,A/C,Tilt,Toolbox,lokr 1987 K20 Chevrolet Suburban. 6" lift. 5.7L/TH400 1979 K60 GMC Coleman 4x4, 427/Allison.

02-02-2003, 01:59 PM	#11
casey Registered User Join Date: Jan 2003 Location: Kelowna B.C. Canada Posts: 2,048	You guys covered all the years, that's one of the coolest pic,s I've ever seen representing the old GM truck years! gotta save that.

02-02-2003, 02:07 PM	#12
Piston Account Suspended Join Date: Oct 2002 Location: Olathe, KS Posts: 2,300	Added a few more pics... sakohntr Yep, its just about ready to be sandblasted. I've got to finish the 72 first to make room for the other stuff though. Hopefully I'll be running the 71 later this year. I just picked up the heads for the 383 but it will be a while before there's anything to put the engine/trans in. LOL I'll be cutting the frame down to a SWB and bolting a StepSide bed on it . Should be a fun ride!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.