|
02-01-2003, 11:09 PM
|
#1 |
|
Registered User
Join Date: Jul 2001
Location: North Delta, British Columbia
Posts: 1,344
|
Blazer tank question
If I convert to a blazer tank, how far can the filler be from the tank? I have a 92 stepside box which has a filler on the box side about a foot behind the stock cab filler. Will it be safe to run hose to a blazer tank in the back of the truck. Is this hose flexible? The truck is a short box so the distance wouldn't be that far. Do you know what I mean? Anyone?
__________________
1992 Gmc 2wd 1972 Chevy Blazer 2wd |
|
|
|
02-01-2003, 11:40 PM
|
#2 |
|
Registered User
Join Date: Oct 2002
Location: Des Moines WA. (Kent, area)
Posts: 668
|
Might consider using small diameter exaust pipe for the run and hoses on the end connections.
__________________
70 chev c10 swb fleet 72 grill, sb 400, 2/4 drop. 68 chev c10 swb fleet Early classic 4/6 drop with 4wheel disc brakes 9"rear 67-8 buckets tilt and A/C Classic GM Truck Club of Washington . |
|
|
|
|
02-02-2003, 02:49 PM
|
#3 |
|
Registered User
Join Date: Jul 2001
Location: North Delta, British Columbia
Posts: 1,344
|
ttt
__________________
1992 Gmc 2wd 1972 Chevy Blazer 2wd |
|
|
|
|
02-02-2003, 03:26 PM
|
#4 |
|
Car Knocker
Join Date: May 2001
Location: jefferson,arkansas
Posts: 664
|
On mine, I filled the factory hole and welded in another. Welded it in right above the the tank fill on side. I used a fill door from a 79 mustang. Nice and flat. I don't have any pics to show but maybe it will give you some more options.
__________________
68 c-10,91 sportside bed,350 .030 over,4 bolt,10-1 comp,2.05 intake/1.94 exhaust,1.6 Harland Sharp roller rockers,edelbrock rpm cam and intake w/750 carb, 700r4, 3.73 gears,Jacabbs Electronic Igntion w/Accel HEI distributer and super coil. ZR-1 roll pan, filled tailights. Blazer tank. Hidden hitch. 2 1/2" Flowmaster 40's. Parts bought but not installed>> ford 9" posi with disc. CCP front and rear lowering kit 4/5. Cab corners,foor boards,rockers, cab braces, Phatom grill, Painless wiring kit. |
|
|
|
|
02-02-2003, 03:42 PM
|
#5 |
|
Registered User
Join Date: Feb 2002
Location: Manchester, PA
Posts: 138
|
I agree with crazy4chevs; I've used exhause pipe (aluminized) for the same thing; I would use the pipe if the distance is anything more than two feet.
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
