WY 1968 Chevy shortbed stepside PARTING - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*sharpie1972* · 02-28-2010, 02:37 PM

Parting a 1968 shortbed stepside. Currently has 1972 clip and A.C. cab.

Rolling chassis. $500.
Solid stepside bed. $650.
1972 A.C. cab. Rockers and cab corners have been replaced. $500.

Please reply in post. Thanks, Sharpie

*sharpie1972* · 02-28-2010, 02:39 PM

....

**special-K** · 02-28-2010, 05:15 PM

I just have to ask what you want for that hood.

*sharpie1972* · 02-28-2010, 06:04 PM

A case of beer and help tearing apart a few trucks! Sharpie

teeitup · 02-28-2010, 06:17 PM

I'd be there if I could!!

nplocoman · 02-28-2010, 06:31 PM

I am interested in the grill, innerfenders and front bumper

*sharpie1972* · 02-28-2010, 06:34 PM

All of those parts are barely driver quality on this truck. Probably not worth shipping. Thanks, Sharpie

nplocoman · 02-28-2010, 06:39 PM

Ok thanks. Never hurts to ask! Does the cab include the doors?

*sharpie1972* · 02-28-2010, 06:44 PM

Yes, they will go with it. Drivers side has a bad hinge pocket, passenger side is good. Thanks, Sharpie

**leddzepp** · 02-28-2010, 06:45 PM

Quote:

Originally Posted by sharpie1972

A case of beer and help tearing apart a few trucks! Sharpie

Wish you were here today...its about 75 degrees and a case of beer and tearing apart a truck sounds GREAT!

**70STOVEBOLT** · 03-01-2010, 06:16 PM

How about the radio antenna, plus shipping to 46562?

**special-K** · 03-01-2010, 08:37 PM

I`d like to oblige.But...That sure sounds good,though.I bet we`d be done before the beer`s gone.

Rochlow · 03-01-2010, 11:51 PM

If you'd be interested in selling the rear shock crossmember, I might be interested

*sharpie1972* · 03-02-2010, 09:40 AM

Rochlow: not parting the chassis on this one. Thanks, Sharpie

glimmertwin01 · 03-02-2010, 09:52 AM

damn Id love the whole truck...
I bet thats cleaner than any rot box here ten fold...

*sharpie1972* · 03-02-2010, 10:39 AM

Yes, it's a vey solid truck. I wouldn't be parting, but the cab has been swapped to a 72 and I'd rather build one with all 68 parts. Sharpie

flat68 · 03-26-2010, 03:23 PM

hey, any pics of e cab? is it rust free or close to? thanks.

**michael bustamante** · 03-26-2010, 03:30 PM

what kind of steering column?

RoadDevil13 · 03-26-2010, 03:33 PM

DAMN I would love that hood.........

**68 Stepside** · 03-26-2010, 06:31 PM

Hey Sharpie, any chance you'd sell the taillights? I just bought my stepside back from my brother, and he managed to run the taillights over (don't ask).

killer71 · 03-26-2010, 06:53 PM

What is the car sitting beside the truck?

*sharpie1972* · 03-26-2010, 07:04 PM

Flat68: Looks like cab is sold locally. I'll let you know if anything changes.

Michael: 68 4 speed column.

RoadDevil: Plan a trip to Yellowstone! A case of beer and a day of labor offer still stands.

68 stepper: How's $50 shipped sound?

Killer: 64 New Yorker wagon. 413 with pushbutton auto. Bought new by my Great-grandfather. Quite the cruiser!

Thanks, Sharpie

killer71 · 03-26-2010, 07:06 PM

care to share any picts? is it for sale?

**68 Stepside** · 03-26-2010, 07:12 PM

Quote:

Originally Posted by sharpie1972

Flat68: Looks like cab is sold locally. I'll let you know if anything changes.

Michael: 68 4 speed column.

RoadDevil: Plan a trip to Yellowstone! A case of beer and a day of labor offer still stands.

68 stepper: How's $50 shipped sound?

Killer: 64 New Yorker wagon. 413 with pushbutton auto. Bought new by my Great-grandfather. Quite the cruiser!

Thanks, Sharpie

By taillights, I meant brake lights and backup lights. I should have been more clear, I apologize. If you're talking brake lights and backup lights, consider it done.

*sharpie1972* · 03-26-2010, 07:19 PM

Killer: Sorry, not for sale, you know how family heirlooms are.... A Mopar amidst a dozen 67-72 Chevy trucks!

68stepper: You get the whole show for $50 shipped. Glad to help.

Thanks, Sharpie

02-28-2010, 02:37 PM	#1
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	1968 Chevy shortbed stepside PARTING Parting a 1968 shortbed stepside. Currently has 1972 clip and A.C. cab. Rolling chassis. $500. Solid stepside bed. $650. 1972 A.C. cab. Rockers and cab corners have been replaced. $500. Please reply in post. Thanks, Sharpie Attached Images

02-28-2010, 02:39 PM	#2
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1968 Chevy shortbed stepside PARTING .... Attached Images

02-28-2010, 05:15 PM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 1968 Chevy shortbed stepside PARTING I just have to ask what you want for that hood. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

02-28-2010, 06:04 PM	#4
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1968 Chevy shortbed stepside PARTING A case of beer and help tearing apart a few trucks! Sharpie

02-28-2010, 06:17 PM	#5
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 1968 Chevy shortbed stepside PARTING I'd be there if I could!! __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-28-2010, 06:31 PM	#6
nplocoman never finish start another Join Date: Mar 2007 Location: North Platte Nebraska Posts: 432	Re: 1968 Chevy shortbed stepside PARTING I am interested in the grill, innerfenders and front bumper Last edited by nplocoman; 02-28-2010 at 06:32 PM.

02-28-2010, 06:34 PM	#7
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1968 Chevy shortbed stepside PARTING All of those parts are barely driver quality on this truck. Probably not worth shipping. Thanks, Sharpie

02-28-2010, 06:39 PM	#8
nplocoman never finish start another Join Date: Mar 2007 Location: North Platte Nebraska Posts: 432	Re: 1968 Chevy shortbed stepside PARTING Ok thanks. Never hurts to ask! Does the cab include the doors?

02-28-2010, 06:44 PM	#9
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1968 Chevy shortbed stepside PARTING Yes, they will go with it. Drivers side has a bad hinge pocket, passenger side is good. Thanks, Sharpie

03-01-2010, 06:16 PM	#11
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,467	Re: 1968 Chevy shortbed stepside PARTING How about the radio antenna, plus shipping to 46562? __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

03-01-2010, 08:37 PM	#12
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 1968 Chevy shortbed stepside PARTING I`d like to oblige.But...That sure sounds good,though.I bet we`d be done before the beer`s gone. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-01-2010, 11:51 PM	#13
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: 1968 Chevy shortbed stepside PARTING If you'd be interested in selling the rear shock crossmember, I might be interested

03-02-2010, 09:40 AM	#14
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1968 Chevy shortbed stepside PARTING Rochlow: not parting the chassis on this one. Thanks, Sharpie

03-02-2010, 09:52 AM	#15
glimmertwin01 Registered User Join Date: Mar 2008 Location: Rochester NY Posts: 1,022	Re: 1968 Chevy shortbed stepside PARTING damn Id love the whole truck... I bet thats cleaner than any rot box here ten fold... __________________ 67/68 K/20 "The BEAST" 68 K15 V6 LWB. 73 K20 GMC Burb "The Bomber" 74 K/5 74 K20 Custom Deluxe 86 K10 Shorty 92 K2500 Burb 95 K2500 GMC Life is what you make it Live each day like it was your last Old GM Trucks never go out of style

03-02-2010, 10:39 AM	#16
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1968 Chevy shortbed stepside PARTING Yes, it's a vey solid truck. I wouldn't be parting, but the cab has been swapped to a 72 and I'd rather build one with all 68 parts. Sharpie



Register or Log In To remove these advertisements.

03-26-2010, 03:23 PM	#17
flat68 Registered User Join Date: Sep 2007 Location: Brooks alberta canada Posts: 85	Re: 1968 Chevy shortbed stepside PARTING hey, any pics of e cab? is it rust free or close to? thanks.

03-26-2010, 03:30 PM	#18
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,867	Re: 1968 Chevy shortbed stepside PARTING what kind of steering column? __________________ 1967custom

03-26-2010, 03:33 PM	#19
RoadDevil13 Registered User Join Date: Dec 2009 Location: Henderson, NV Posts: 52	Re: 1968 Chevy shortbed stepside PARTING DAMN I would love that hood.........

03-26-2010, 06:31 PM	#20
68 Stepside huh? Join Date: May 2000 Location: Washington, Illinois Posts: 5,690	Re: 1968 Chevy shortbed stepside PARTING Hey Sharpie, any chance you'd sell the taillights? I just bought my stepside back from my brother, and he managed to run the taillights over (don't ask). __________________ Someday when I'm lonely, Wishing you weren't so far away, Then I will remember Things we said today. RIP El Jay

03-26-2010, 06:53 PM	#21
killer71 Registered User Join Date: May 2006 Location: at work Posts: 2,552	Re: 1968 Chevy shortbed stepside PARTING What is the car sitting beside the truck? __________________ R.I.P. Killer 71 10/26/07

03-26-2010, 07:04 PM	#22
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1968 Chevy shortbed stepside PARTING Flat68: Looks like cab is sold locally. I'll let you know if anything changes. Michael: 68 4 speed column. RoadDevil: Plan a trip to Yellowstone! A case of beer and a day of labor offer still stands. 68 stepper: How's $50 shipped sound? Killer: 64 New Yorker wagon. 413 with pushbutton auto. Bought new by my Great-grandfather. Quite the cruiser! Thanks, Sharpie

03-26-2010, 07:06 PM	#23
killer71 Registered User Join Date: May 2006 Location: at work Posts: 2,552	Re: 1968 Chevy shortbed stepside PARTING care to share any picts? is it for sale? __________________ R.I.P. Killer 71 10/26/07

03-26-2010, 07:19 PM	#25
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1968 Chevy shortbed stepside PARTING Killer: Sorry, not for sale, you know how family heirlooms are.... A Mopar amidst a dozen 67-72 Chevy trucks! 68stepper: You get the whole show for $50 shipped. Glad to help. Thanks, Sharpie Last edited by sharpie1972; 03-26-2010 at 07:19 PM.

Register or Log In To remove these advertisements.