1949 window regulators - The 1947 - Present Chevrolet & GMC Truck Message Board Network

steve23116 · 03-01-2010, 11:22 PM

I just got my project home and started in on it. It's a 1949 chevy 3600. The inside door handles and window rollers are gone. The problem is the teeth where they mount are completely stripped off. Do I have to buy the complete door assembly and window regulators or can the studs just be replaced, or is there someway to fix them. I hate to spend $300.00

Thadious · 03-02-2010, 02:18 AM

Nope, you can pick up just the regulators... $59.95 ea @ Classic Parts of America http://www.classicparts.com/Controls.../products/823/

Cheers,
Ted.

GRIMSS · 03-02-2010, 09:08 AM

Quote:

Originally Posted by Thadious

Nope, you can pick up just the regulators... $59.95 ea @ Classic Parts of America http://www.classicparts.com/Controls.../products/823/

Cheers,
Ted.

They also sell the regulator repair kit, but I would pass on that. I bought the kits for my '56 and ended up not using it because they were not the best quality. I would look for extra set of door to rob the parts off of first and if you can't find that then resort to buying the new units.

britnjc · 03-02-2010, 06:59 PM

you could just drill a small hole and sink a set screw into the the knob....

truckerbob56 · 03-02-2010, 11:45 PM

what I did was file a flat spot and then tighten the set screw

steve23116 · 03-03-2010, 12:38 AM

After I thought about it, that's what I'm going to do. Everything works good, they're just rounded off. Hate to replace everything just for that. I did learn something though, Classic parts is only about 5 minutes from where I work, I got a new hangout. It's a nice place. Thanks for the answers guys.

03-01-2010, 11:22 PM	#1
steve23116 Registered User Join Date: Nov 2009 Location: altamont mo. Posts: 39	1949 window regulators I just got my project home and started in on it. It's a 1949 chevy 3600. The inside door handles and window rollers are gone. The problem is the teeth where they mount are completely stripped off. Do I have to buy the complete door assembly and window regulators or can the studs just be replaced, or is there someway to fix them. I hate to spend $300.00

03-02-2010, 02:18 AM	#2
Thadious Registered User Join Date: Sep 2008 Location: Creston, BC Canada Posts: 369	Re: 1949 window regulators Nope, you can pick up just the regulators... $59.95 ea @ Classic Parts of America http://www.classicparts.com/Controls.../products/823/ Cheers, Ted. __________________ '51 Chevy Build - In the design stages Aut viam inveniam aut faciam - I will either find a way or make one. If you don't have time to do it right the first time, when will you... My new build - https://67-72chevytrucks.com/vboard/...70#post8958970

03-02-2010, 06:59 PM	#4
britnjc Registered User Join Date: Mar 2009 Location: Helena, Alabama Posts: 453	Re: 1949 window regulators you could just drill a small hole and sink a set screw into the the knob....

03-02-2010, 11:45 PM	#5
truckerbob56 Registered User Join Date: Jan 2010 Location: Winnipeg Manioba Posts: 21	Re: 1949 window regulators what I did was file a flat spot and then tighten the set screw

03-03-2010, 12:38 AM	#6
steve23116 Registered User Join Date: Nov 2009 Location: altamont mo. Posts: 39	Re: 1949 window regulators After I thought about it, that's what I'm going to do. Everything works good, they're just rounded off. Hate to replace everything just for that. I did learn something though, Classic parts is only about 5 minutes from where I work, I got a new hangout. It's a nice place. Thanks for the answers guys.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.