|
03-07-2010, 09:33 PM
|
#1 |
|
Registered User
 Join Date: Feb 2010
Location: The Dalles Oregon
Posts: 191
|
motor swap
well the motor in my truck is messed up went to fire it up and oil went spewing out the oil breather checked it out and all the water in the rad is now in the oil. the motor i have now is a 1979 chevy 292 out a g20 van. i have a extra motor thats out of a 1950's gmc. its a 302 jimmy motor should it bolt right up 2 the tranny and all? i know i will prob have to move the motor mounts? also i have the stock 66 truck manual 4speed on the floor
__________________
1966 C-10 long wide- currently with 2 3/4 sectioned crossmember, 3 inch cupped a arms with 2700 bags, 67 master cylinder, in the middle of a v8 swap, soon custom rear wishbone set up and bags 1942 chevy/divco ambulance 1937 chevy truck Last edited by Twiztid_66c10; 03-07-2010 at 10:13 PM. |
|
|
|
03-08-2010, 01:25 AM
|
#2 |
|
60-66 Nut
 Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: motor swap
It should bolt up to the trans with a different bellhousing than what is behind the 292.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
