|
03-22-2010, 09:37 AM
|
#1 |
|
Registered User
Join Date: Mar 2010
Location: metamora michigan
Posts: 3
|
no tail lights
My 86 k20 has a few wiring problems and i was wondering if i could get some suggestions on fixing them. First my headlights, brake lights, turn signals and 4 ways all work but my tail lights and marker lights dont work. Any help would be greatly appreciated.
|
|
|
|
03-22-2010, 10:21 AM
|
#2 |
|
Robert Olson Transport
 
Join Date: Oct 2002
Location: recent transplant to NC USA
Posts: 20,310
|
Re: no tail lights
start with the ground back there then its test lite time and following the wires back to see if there is power from the sockets to the plugs
__________________
Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!! |
|
|
|
|
03-22-2010, 11:00 AM
|
#3 |
|
One shot, one kill.
Join Date: Dec 2007
Location: Saratoga Springs NY
Posts: 859
|
Re: no tail lights
HNT, first do what Bob said. If no power when you back probe sockets with bulbs out go underneath aand find harnace plug, pull it appart and do the same probe tests. Some things to look for, are any of the connections green? If they are, cut them out and use heat shrink butt connectors to restore wireing. Does it have a trailer hitch and is the wireing to it hooked in with "scotchlocks"? If so you'll have to cut them out and repair as above. Carefully inspect harnace from back to front looking for green stuff or a swelling of the wire indicating corrosion under the insulation (thats why you NEVER penitrate the insulation with a test light) If you want I'll have you call me at 518-581-1622 so I can explain in detail what you have to do. Jim
__________________
1984 K20 350M engine with 465,000 miles. Well, it's finally done!! Almost 2 years of work, but it was really worth the effort. Little stuff left to do is mount winch, wet sand & buff out and build belly pan\running boards. Body work takes lots and LOTS of beer!!!! God, Guts and Guns made America and God, Guts and Guns will preserve it! The worst thing you could do is get into my sights, but that don't matter, you'll never know it, cause you'll never hear the shot  Jim or Paladin whichever you choose.
|
|
|
|
|
03-22-2010, 02:24 PM
|
#4 |
|
Registered User
Join Date: Feb 2010
Location: Murfreesboro Tennessee
Posts: 129
|
Re: no tail lights
Check the fuse if fuse is good check the brown wire coming off of the headlight switch with the switch in the on position to see if power is there
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
