TX WTB 6 Cyl Power Steering - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**425HP409** · 03-29-2010, 08:14 PM

I am looking for a power steering setup for a 70 250cid 2WD truck. I need the brackets, pump, and anything else you might have for an installation.

**too much stuff** · 03-29-2010, 08:23 PM

I just saw a complete setup in a mid 70s 1/2 ton pickup last week. I will see if it is still there tomorrow if i can. Any idea what it is worth?

GreenAcres · 03-29-2010, 10:04 PM

Anyone have a photo handy of the proper brackets?
Not trying to hijack, not near my parts stash and always forget my camera. I may have one.

**NC67Chev** · 03-30-2010, 08:11 AM

Here's a shortcut to a set-up that's currently on ebay. There's some pretty good pictures of the brackets:

http://cgi.ebay.com/ebaymotors/Chevy...Q5fAccessories

This appears to be a correct set-up for a truck (notice the 1/2 inch spacing between the belt grooves). Some of the set-up's off of cars (nova's, etc) don't have this spacing.

GreenAcres · 03-30-2010, 08:21 AM

Quote:

Originally Posted by NC67Chev

There's some pretty good pictures of the brackets:

(in my best Cap'n Kirk voice) can't...get...pictures...to enlarge

**425HP409** · 03-30-2010, 11:00 AM

Too Much Stuff, thanks, if you would look at it and possible get pictures that would be great. As far as to how much it is worth, that would depend on how complete the set up is.

**wancosc356** · 03-30-2010, 12:12 PM

Quote:

Originally Posted by NC67Chev

Here's a shortcut to a set-up that's currently on ebay. There's some pretty good pictures of the brackets:

http://cgi.ebay.com/ebaymotors/Chevy...Q5fAccessories

This appears to be a correct set-up for a truck (notice the 1/2 inch spacing between the belt grooves). Some of the set-up's off of cars (nova's, etc) don't have this spacing.

Looks to be a 1973 and up setup. For motors with the integrated head.

EDIT: Don't mark my words. I could be wrong.

**NC67Chev** · 03-30-2010, 02:30 PM

I'm way far from an expert, but the brackets are exactly like what I just put on my 67.

altunaa · 03-30-2010, 02:38 PM

yes, they are from a non integrated head ( as you can read in the "ask seller a question" section ) i think the brackets are the right ones for a 250 pre 1973.
best regards

Mt Man Chad · 03-30-2010, 03:02 PM

Here's the original setup on my 71 SWB.

**425HP409** · 04-02-2010, 09:26 AM

ttt

KrazyRay · 04-02-2010, 10:24 AM

Quote:

Originally Posted by 425HP409

ttt

I have the whole setup for an integrated head that came off a 79 Chevy. I heard a couple of board members were able to make it work on their early 250. The setup I have includes AC, PS pulleys, brackets, pump, and a core AC compressor. I will sell for $115 shipped if you can use it. Thanks, Ray

KrazyRay · 04-07-2010, 08:28 PM

pics

03-29-2010, 08:14 PM	#1
425HP409 425hp409 Join Date: Oct 2008 Location: Prosper Texas Posts: 841	WTB 6 Cyl Power Steering I am looking for a power steering setup for a 70 250cid 2WD truck. I need the brackets, pump, and anything else you might have for an installation. __________________ Charles 68 SWB, Dad bought new, now 396 & factory ac 64 Impala SS, 409 425HP, 4 speed AC 64 Bel Air Wagon, 400 Small Block 57 Bel Air all original 283 w/Factory Air 77 GMC Sprint, 454/425HP 67 Olds 442, all original 90 ZR1 Corvette

03-29-2010, 08:23 PM	#2
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,813	Re: WTB 6 Cyl Power Steering I just saw a complete setup in a mid 70s 1/2 ton pickup last week. I will see if it is still there tomorrow if i can. Any idea what it is worth? __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

03-29-2010, 10:04 PM	#3
GreenAcres "I tawt I taw a puddy tat!" Join Date: Feb 2010 Location: KC Posts: 109	Re: WTB 6 Cyl Power Steering Anyone have a photo handy of the proper brackets? Not trying to hijack, not near my parts stash and always forget my camera. I may have one. __________________ '67 C/20 LWB CST 283/SM420 FleetWood - project "HELL!" '68 GMC 1500 SWB Fleetside 250/TOT SOLD '70 C/10 454/TH400 LWB SOLD Last edited by GreenAcres; 03-29-2010 at 10:05 PM.

03-30-2010, 08:11 AM	#4
NC67Chev Senior Member Join Date: Oct 2009 Location: Greensboro, NC Posts: 698	Re: WTB 6 Cyl Power Steering Here's a shortcut to a set-up that's currently on ebay. There's some pretty good pictures of the brackets: http://cgi.ebay.com/ebaymotors/Chevy...Q5fAccessories This appears to be a correct set-up for a truck (notice the 1/2 inch spacing between the belt grooves). Some of the set-up's off of cars (nova's, etc) don't have this spacing. __________________ 1967 Chevy C-10, 250 L6, Powerglide, 3.73, SWB, Fleetside Upgrades: Power steering, Offset air cleaner, Rear Sport bumper, 3 point safety belts, HEI, -1/-2 springs, 16x5 wheels, McGaughy's disc brake conversion, Sway bar Last edited by NC67Chev; 03-30-2010 at 08:16 AM.

03-30-2010, 11:00 AM	#6
425HP409 425hp409 Join Date: Oct 2008 Location: Prosper Texas Posts: 841	Re: WTB 6 Cyl Power Steering Too Much Stuff, thanks, if you would look at it and possible get pictures that would be great. As far as to how much it is worth, that would depend on how complete the set up is. __________________ Charles 68 SWB, Dad bought new, now 396 & factory ac 64 Impala SS, 409 425HP, 4 speed AC 64 Bel Air Wagon, 400 Small Block 57 Bel Air all original 283 w/Factory Air 77 GMC Sprint, 454/425HP 67 Olds 442, all original 90 ZR1 Corvette

03-30-2010, 02:30 PM	#8
NC67Chev Senior Member Join Date: Oct 2009 Location: Greensboro, NC Posts: 698	Re: WTB 6 Cyl Power Steering I'm way far from an expert, but the brackets are exactly like what I just put on my 67. __________________ 1967 Chevy C-10, 250 L6, Powerglide, 3.73, SWB, Fleetside Upgrades: Power steering, Offset air cleaner, Rear Sport bumper, 3 point safety belts, HEI, -1/-2 springs, 16x5 wheels, McGaughy's disc brake conversion, Sway bar

03-30-2010, 02:38 PM	#9
altunaa Registered User Join Date: Jan 2006 Location: Uruguay Posts: 101	Re: WTB 6 Cyl Power Steering yes, they are from a non integrated head ( as you can read in the "ask seller a question" section ) i think the brackets are the right ones for a 250 pre 1973. best regards

03-30-2010, 03:02 PM	#10
Mt Man Chad Registered User Join Date: Oct 2006 Location: Oakridge Oregon Posts: 1,864	Re: WTB 6 Cyl Power Steering Here's the original setup on my 71 SWB. Attached Images __________________ 68 CST SWB - Gold/White 50th anniversary /TH350/Buddy Buckets/3.73 Posi/dogdish caps. 68 K10 Burb - Gold/White 327/SM465/NP205/3.73 "Daa Burb" build thread

04-02-2010, 09:26 AM	#11
425HP409 425hp409 Join Date: Oct 2008 Location: Prosper Texas Posts: 841	Re: WTB 6 Cyl Power Steering ttt __________________ Charles 68 SWB, Dad bought new, now 396 & factory ac 64 Impala SS, 409 425HP, 4 speed AC 64 Bel Air Wagon, 400 Small Block 57 Bel Air all original 283 w/Factory Air 77 GMC Sprint, 454/425HP 67 Olds 442, all original 90 ZR1 Corvette

04-07-2010, 08:28 PM	#13
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: WTB 6 Cyl Power Steering pics Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.