|
04-30-2010, 10:57 PM
|
#1 |
|
Registered User
Join Date: Apr 2010
Location: Stockton ca
Posts: 126
|
tie rod problems
I have a 72 2wd blazer,i was going to change the tie rods and i noticed where the spindle and tie meet is real sloppy,come to find out that the hole in the spindle is bigger the the shaft of the tie rod i already went to part store took back the new one tried to figure out whats going on...the only thing i figure out spindle is wrong,By the way po put 2 inch lowered spindles on it..Any help would be great,
|
|
|
|
05-01-2010, 01:14 AM
|
#2 |
|
67-72 parts collector,…
 
Join Date: Nov 2002
Location: Mid-MO
Posts: 22,700
|
Re: tie rod problems
It may have 73-87 spindles on it.
You might purchase a new 73-87 outer tie rod and see if it fits the spindle. I would also check and see if the spindle is ruined from the sloppy fit.
__________________
Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 Last edited by lolife99; 05-01-2010 at 01:15 AM. |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
