Local Money Makers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SCOTI · 06-30-2010, 11:51 PM

I took a few pics a while back of a couple of trucks that frequent our local 'hot-rod & Harleys' joint (Kellers, Dallas TX, NW Highway @ Abrams).

The short fleet has been together many years & sports a big inch, high dollar power-plant. His wife also has a sweeeeeet 71/72 burb that's got a BBC, lowered, sano interior, & painted the OE dark Olive/white colors w/some cool pinstriping (they didn't have the burb there that night).

The S10 I don't know much about other than the word was it's just a 'little' faster than it looks. Both trucks were extremely detailed. I really liked the cage in the dime & the textured finish throughout....

Schwinn68 · 07-01-2010, 12:14 AM

sweet trucks for sure!

djracer · 07-01-2010, 04:37 AM

Do you know what rear suspension is on the red truck?

SCOTI · 07-01-2010, 09:15 AM

Quote:

Originally Posted by djracer

Do you know what rear suspension is on the red truck?

I'm not sure on this one. I'll check next time I see it @ Kellers (he's a regular).

team39763 · 07-01-2010, 05:12 PM

Is the cage in that red truck legal at the track? I'd like to do my rollbar like that.

SCOTI · 07-01-2010, 06:08 PM

I don't believe so.

hotrod 80 · 07-01-2010, 07:32 PM

The roll bar in the black truck is below the bed lin also , but nice .

bigguy69 · 07-01-2010, 08:54 PM

looks good!

midevil1 · 07-01-2010, 09:08 PM

We built a cage like that in an 85 S10. It ran a twinturbo SBC that went 8.20's and passed tech at HRP everytime. Anybody that has raced at HRP knows they STICK to the RULEBOOK. I am not sure, but if you dont run the regular down bar setup. You have to add a certain amount of tubing to compensate. Dont have a rule book in front of me so....

SCOTI · 07-01-2010, 10:46 PM

I took the pic of the S10's bed area because I liked the way they tied the shock mounts into the bars into the rails. Ladder bar set-up on that one.

nxtruck · 07-02-2010, 05:38 PM

Nice trucks, especially the red one!!

**regan wilson** · 07-02-2010, 06:00 PM

I've seen the Red Truck in person at the last Super Chevy I ran (unless it has a twin) and it is a very nice piece. As far as the rollcage goes I think its good with a Funny Car cage .

hotrod 80 · 07-02-2010, 06:49 PM

Quote:

Originally Posted by midevil1

We built a cage like that in an 85 S10. It ran a twinturbo SBC that went 8.20's and passed tech at HRP everytime. Anybody that has raced at HRP knows they STICK to the RULEBOOK. I am not sure, but if you dont run the regular down bar setup. You have to add a certain amount of tubing to compensate. Dont have a rule book in front of me so....

Im pretty good friends with Garrett .

midevil1 · 07-03-2010, 12:53 AM

Quote:

Originally Posted by hotrod 80

Im pretty good friends with Garrett .

Too bad Flaco owns that badboy now....

hotrod 80 · 07-03-2010, 11:04 PM

That chassis still hold s the 8.5 outlaw world record . Flaco is cool to saw him last friday at HRP. It was a steal at what they were selling it for .

midevil1 · 07-04-2010, 01:21 PM

Quote:

Originally Posted by hotrod 80

That chassis still hold s the 8.5 outlaw world record . Flaco is cool to saw him last friday at HRP. It was a steal at what they were selling it for .

Yeah, no problems with Flaco. Just dont see him as much as Garrett. That truck ran Mikey's ole' stock housing powerglide into the low 8's until Garrett wheelhopped it out of the burnout box at HRP and it chunked the tailhousing and driveshaft....

**Hart_Rod** · 07-10-2010, 03:40 PM

The R&W truck is sick!!!!!!!!!!!

06-30-2010, 11:51 PM	#1
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,080	Local Money Makers I took a few pics a while back of a couple of trucks that frequent our local 'hot-rod & Harleys' joint (Kellers, Dallas TX, NW Highway @ Abrams). The short fleet has been together many years & sports a big inch, high dollar power-plant. His wife also has a sweeeeeet 71/72 burb that's got a BBC, lowered, sano interior, & painted the OE dark Olive/white colors w/some cool pinstriping (they didn't have the burb there that night). The S10 I don't know much about other than the word was it's just a 'little' faster than it looks. Both trucks were extremely detailed. I really liked the cage in the dime & the textured finish throughout.... Attached Images __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.* Last edited by SCOTI; 06-30-2010 at 11:52 PM.

07-01-2010, 12:14 AM	#2
Schwinn68 Registered User Join Date: Mar 2010 Location: Minooka IL Posts: 191	Re: Local Money Makers sweet trucks for sure! __________________ Ben _____________________________________ 1971 Chevy shortbed 350/4-speed sold 2005 Chevy Duramax EC/4x4 Local 597 Pipefitters certified TIG MIG and stick welder

07-01-2010, 04:37 AM	#3
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Local Money Makers Do you know what rear suspension is on the red truck? __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

07-01-2010, 05:12 PM	#5
team39763 Registered User Join Date: Feb 2007 Location: Texas Posts: 469	Re: Local Money Makers Is the cage in that red truck legal at the track? I'd like to do my rollbar like that. __________________ 1982 Silverado - SBE, cleaned up GM heads, small cam, TH350, 850 Demon, 4.56 gears, and caltracs. Best time so far 11.8@XXXMPH

07-01-2010, 06:08 PM	#6
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,080	Re: Local Money Makers I don't believe so. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

07-01-2010, 07:32 PM	#7
hotrod 80 mini truck racer Join Date: Aug 2006 Location: Baytown , texas Posts: 3,010	Re: Local Money Makers The roll bar in the black truck is below the bed lin also , but nice . __________________ 1949 5-window 1969 Camaro 1976 Chevy Luv yellow 1978 Chevy Luv Blue 1976 Chevy Luv Black 1979 Firebird Flooded in Harvey 1999 F350 Dually 2005 GMC Sierra 4.8 RCSB 2014 Explorer (wifes) My build :http://67-72chevytrucks.com/vboard/s...d.php?t=399148 Build #2: http://67-72chevytrucks.com/vboard/s...d.php?t=653583

07-01-2010, 08:54 PM	#8
bigguy69 dazed and confused Join Date: Jul 2008 Location: marion nc Posts: 1,649	Re: Local Money Makers looks good! __________________ members met: redbaron69, billsbowtie,nc67

07-01-2010, 09:08 PM	#9
midevil1 ShortBus KingPin Join Date: Feb 2010 Location: houston texas Posts: 146	Re: Local Money Makers We built a cage like that in an 85 S10. It ran a twinturbo SBC that went 8.20's and passed tech at HRP everytime. Anybody that has raced at HRP knows they STICK to the RULEBOOK. I am not sure, but if you dont run the regular down bar setup. You have to add a certain amount of tubing to compensate. Dont have a rule book in front of me so.... __________________ 67 shortstep prosteet. 505 BBC, FULL BILLET TH350, Owner built EVERYTHING.... (My RIDE) 2008 GMC Yukon DENALI, 425 AWHP, 5700LBS, 12.40's at 109mph. (Her RIDE) 2006 Kawasaki Brute Force, 916cc, 80 shot, 6.20's at 111 mph. (Her RIDE) Last edited by midevil1; 07-01-2010 at 09:14 PM.

07-01-2010, 10:46 PM	#10
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,080	Re: Local Money Makers I took the pic of the S10's bed area because I liked the way they tied the shock mounts into the bars into the rails. Ladder bar set-up on that one. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

07-02-2010, 05:38 PM	#11
nxtruck Registered User Join Date: Jun 2006 Location: Jackson, Mo. Posts: 607	Re: Local Money Makers Nice trucks, especially the red one!! __________________ Chris 1966 Chevy C10 LWB, 434 sbc, TH350, 12-bolt, factory suspension, pump gas 7.02 @ 95.8, 1.45 60' 1965 Chevy C10 LWB, 355 sbc, TH350, daily driver

07-02-2010, 06:00 PM	#12
regan wilson Registered User Join Date: Mar 2008 Location: tyler texas Posts: 1,542	Re: Local Money Makers I've seen the Red Truck in person at the last Super Chevy I ran (unless it has a twin) and it is a very nice piece. As far as the rollcage goes I think its good with a Funny Car cage . __________________ NHRA Super Street 469C It only runs 10.90 at 156 mph I was Dragtruck when Dragtruck wasn't Cool!

07-03-2010, 11:04 PM	#15
hotrod 80 mini truck racer Join Date: Aug 2006 Location: Baytown , texas Posts: 3,010	Re: Local Money Makers That chassis still hold s the 8.5 outlaw world record . Flaco is cool to saw him last friday at HRP. It was a steal at what they were selling it for . __________________ 1949 5-window 1969 Camaro 1976 Chevy Luv yellow 1978 Chevy Luv Blue 1976 Chevy Luv Black 1979 Firebird Flooded in Harvey 1999 F350 Dually 2005 GMC Sierra 4.8 RCSB 2014 Explorer (wifes) My build :http://67-72chevytrucks.com/vboard/s...d.php?t=399148 Build #2: http://67-72chevytrucks.com/vboard/s...d.php?t=653583 Last edited by hotrod 80; 07-03-2010 at 11:06 PM.

07-10-2010, 03:40 PM	#17
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,862	Re: Local Money Makers The R&W truck is sick!!!!!!!!!!! __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.