The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Suspension

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 07-11-2010, 12:13 PM   #1
1965 Tuned Port
Registered User
 
1965 Tuned Port's Avatar
 
Join Date: May 2010
Location: Poway So Cal
Posts: 11
Need help with disc brake swap

Here is the problem .I have a 65 1/2 ton that I am trying to put disc brakes on . I rounded up the parts I thought I needed and now I have way to much positive camber . I think I may have the wrong spindles . They have 6 lug rotors and look like the ones on a 90ish pickup . The steering stops on the spindles are so short that the caliper bolt will hit before the stop . I got the spindles , rotors and calipers at a swap meet . I used lower control arms from a 85 3/4 ton . I put in new ball joints in the uppers and lowers . I took all of the shims and even the the thick washers from behind the upper control arm and still have to much camber . HELP .

Last edited by 1965 Tuned Port; 07-14-2010 at 08:14 AM.
1965 Tuned Port is offline   Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:39 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com