WY 12 bolt 6 lug rearend parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*sharpie1972* · 07-26-2010, 04:24 PM

Parts from a 1969 C10 6 lug 12 bolt. Please reply in thread.
Thanks, Sharpie

Brake drums. Good shape. $25 for the pair plus $14.50 USPS large flat rate.

6 lug axles, clean and straight. $25 each plus actual shipping.

12 bolt rearend cover and bolts in great shape. $25 shipped.

12 bolt pinion yoke. clean, not grooved in seal area. $25 shipped. SOLD

*sharpie1972* · 07-26-2010, 04:25 PM

.....

**Thealien** · 08-01-2010, 07:52 PM

Still have the cover and yoke?

*sharpie1972* · 08-01-2010, 08:52 PM

Thealien: Still have the cover and yoke. $45 shipped if you want the pair.
Thanks, Sharpie

**Thealien** · 08-14-2010, 03:38 PM

Is there a dent in the cover about the 3-4:00 area?

Is that a Ubolt or strap type yoke?

Looking for a near perfect 12 bolt cover to have powdercoated.

*sharpie1972* · 08-14-2010, 03:44 PM

I'll check it over closely for dents, U-bolt style yoke. Thanks, Sharpie

**Thealien** · 08-14-2010, 06:56 PM

Let me know about the cover. I'll take the yoke either way.

Any more GMC radiator core support?

*sharpie1972* · 08-14-2010, 07:04 PM

I checked the cover over closely and it looks nearly perfect. As always 100% satisfaction guarantee, ship it back on my dime for a full refund if you don't like it.
The only GMC core support I have available is a 67. Last one cost $135 to ship so that might be a factor as well. Thanks, Sharpie

**Thealien** · 08-15-2010, 07:04 AM

OK send me your paypal and I will send payment of $45 for both the cover and yoke.

What is the difference between a 67 and 72 GMC core support other than a place to bolt a lower valance to?

My core support is nice and rust free but my headlight mounts seem to be bent as headlight adjustment is difficult. I am looking for something rust free I can also have powdercoated.

Thanks
Mark

*sharpie1972* · 08-15-2010, 09:05 AM

Hi Mark, PM sent. No other differences that I'm aware of. I checked the 67 over and it has holes for AC lines from dealer installed air. Thanks, Sharpie

**Thealien** · 08-15-2010, 09:29 AM

payment sent

Are the AC holes in the factory AC location?

Keep me in mind for a core support if you come across one.

*sharpie1972* · 08-15-2010, 09:39 AM

No, they usually just buzzed the holes with a hole saw at the dealer. Sharpie

*sharpie1972* · 09-22-2010, 10:27 AM

...

07-26-2010, 04:24 PM	#1
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	12 bolt 6 lug rearend parts Parts from a 1969 C10 6 lug 12 bolt. Please reply in thread. Thanks, Sharpie Brake drums. Good shape. $25 for the pair plus $14.50 USPS large flat rate. 6 lug axles, clean and straight. $25 each plus actual shipping. 12 bolt rearend cover and bolts in great shape. $25 shipped. 12 bolt pinion yoke. clean, not grooved in seal area. $25 shipped. SOLD Attached Images Last edited by sharpie1972; 09-22-2010 at 10:28 AM.

07-26-2010, 04:25 PM	#2
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 12 bolt 6 lug rearend parts ..... Attached Images

08-01-2010, 07:52 PM	#3
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,138	Re: 12 bolt 6 lug rearend parts Still have the cover and yoke? __________________ Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205

08-01-2010, 08:52 PM	#4
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 12 bolt 6 lug rearend parts Thealien: Still have the cover and yoke. $45 shipped if you want the pair. Thanks, Sharpie

08-14-2010, 03:38 PM	#5
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,138	Re: 12 bolt 6 lug rearend parts Is there a dent in the cover about the 3-4:00 area? Is that a Ubolt or strap type yoke? Looking for a near perfect 12 bolt cover to have powdercoated. __________________ Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205

08-14-2010, 03:44 PM	#6
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 12 bolt 6 lug rearend parts I'll check it over closely for dents, U-bolt style yoke. Thanks, Sharpie

08-14-2010, 06:56 PM	#7
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,138	Re: 12 bolt 6 lug rearend parts Let me know about the cover. I'll take the yoke either way. Any more GMC radiator core support? __________________ Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205

08-14-2010, 07:04 PM	#8
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 12 bolt 6 lug rearend parts I checked the cover over closely and it looks nearly perfect. As always 100% satisfaction guarantee, ship it back on my dime for a full refund if you don't like it. The only GMC core support I have available is a 67. Last one cost $135 to ship so that might be a factor as well. Thanks, Sharpie

08-15-2010, 07:04 AM	#9
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,138	Re: 12 bolt 6 lug rearend parts OK send me your paypal and I will send payment of $45 for both the cover and yoke. What is the difference between a 67 and 72 GMC core support other than a place to bolt a lower valance to? My core support is nice and rust free but my headlight mounts seem to be bent as headlight adjustment is difficult. I am looking for something rust free I can also have powdercoated. Thanks Mark __________________ Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205

08-15-2010, 09:05 AM	#10
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 12 bolt 6 lug rearend parts Hi Mark, PM sent. No other differences that I'm aware of. I checked the 67 over and it has holes for AC lines from dealer installed air. Thanks, Sharpie

08-15-2010, 09:29 AM	#11
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,138	Re: 12 bolt 6 lug rearend parts payment sent Are the AC holes in the factory AC location? Keep me in mind for a core support if you come across one. __________________ Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205

08-15-2010, 09:39 AM	#12
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 12 bolt 6 lug rearend parts No, they usually just buzzed the holes with a hole saw at the dealer. Sharpie

09-22-2010, 10:27 AM	#13
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 12 bolt 6 lug rearend parts ...



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.