|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
08-09-2010, 07:53 PM
|
#1 |
|
Registered User
 Join Date: Feb 2003
Location: easley, sc
Posts: 45
|
power brake booster mounting
my 67 has disc/drum brake with non-boosted brakes. decided to mount a dual diaphram booster with a new master cylinder. since it set so much further away from the firewall, it would be much easier to plumb the brake lines if the proportioning valve was mounted at the firewall...question...does the proportioning valve have to be located right at the master cylinder with 2-3 inch lines between or can the valve be placed 12-15 inches away? appreciate any insight or help!
|
|
|
|
08-09-2010, 08:34 PM
|
#2 |
|
Registered User
Join Date: Feb 2009
Location: Santa Rosa, CA
Posts: 267
|
Re: power brake booster mounting
In later years it was mounting on the front crossmember, sort of straight down from the PS pump. I think you can do what you please.
Last edited by DjS71; 08-09-2010 at 08:34 PM. |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
