What to use for lower radiator hose? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chevydog66 · 08-19-2010, 11:19 PM

I've installed my 6.0 for the last time finally. I have the 99 upper radiator hose, but what are you guys using for the lower?

glock35ipsc · 08-20-2010, 09:49 AM

I used both the upper and lower hoses that came on the 5.3l. Both fit like a glove, and the lower was practically the same shape as the truck's original hose.

chevydog66 · 08-20-2010, 10:29 AM

What year 5.3? Should I get a 99 just like the upper?

soule64 · 08-20-2010, 10:45 AM

I used the stock 350 hose that was originally in the truck. I had to trim it down a little, but it also fit very well

chevydog66 · 08-20-2010, 10:50 AM

Quote:

Originally Posted by soule64

I used the stock 350 hose that was originally in the truck. I had to trim it down a little, but it also fit very well

Ya, I mocked it up, and considered cutting off some on the water pump side.

**Clyde65** · 08-20-2010, 11:10 AM

could I see some pictures please? the angle of the waterpump and radiator is extreme imo and my stock lower hose kinked pretty bad so I used a flex hose which I dont like, please show me what you did

glock35ipsc · 08-20-2010, 11:26 AM

This is the hose off of the 2006 engine. I imagine they would be the same from 99-07 at least. I also trimmed a little off the water pump end. I could have used either this hose or the one off of the small block, but this one was in much better shape, so I used it. Fits perfect with no kinks.

chevydog66 · 08-20-2010, 11:32 AM

Kewl, thanks again Glock.

chevydog66 · 08-20-2010, 07:44 PM

I bought 1 for a 02 and since I have a/c already in my truck the inlet and outlet of the radiator is bigger, therefore I really had to stretch the hoses to get them on. what a pita.

**Clyde65** · 08-21-2010, 01:32 PM

glock, how wide is ur radiator, I have the stock 65 and it is only like 25" wide so the lower hose is really contorted.

OKGMC4 · 08-21-2010, 07:06 PM

Ya, how wide is the radiator? I found the perfect one for my 56 but it's a narrow radiator. 21710 Gates, but the 90 degree turn on the end has to be cut off.

glock35ipsc · 08-22-2010, 11:45 PM

It's about 28.5" inside the tanks. It's the truck's original radiator.

08-19-2010, 11:19 PM	#1
chevydog66 GM ONLY BABY!!! Join Date: Oct 2003 Location: Fort Wayne, IN. Posts: 1,998	What to use for lower radiator hose? I've installed my 6.0 for the last time finally. I have the 99 upper radiator hose, but what are you guys using for the lower? __________________ 2 wrongs don't make a right, but 3 lefts do. 66 Chevelle Malibu 406ci, 573hp, 10.99@121mph 96 Chevy Silverado Z71 72 GMC 1500 Super Custom LS 6.0/4L65 on airride http://www.cardomain.com/ride/707879...mc-c-k-pick-up

08-20-2010, 09:49 AM	#2
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Re: What to use for lower radiator hose? I used both the upper and lower hoses that came on the 5.3l. Both fit like a glove, and the lower was practically the same shape as the truck's original hose. __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

08-20-2010, 10:29 AM	#3
chevydog66 GM ONLY BABY!!! Join Date: Oct 2003 Location: Fort Wayne, IN. Posts: 1,998	Re: What to use for lower radiator hose? What year 5.3? Should I get a 99 just like the upper? __________________ 2 wrongs don't make a right, but 3 lefts do. 66 Chevelle Malibu 406ci, 573hp, 10.99@121mph 96 Chevy Silverado Z71 72 GMC 1500 Super Custom LS 6.0/4L65 on airride http://www.cardomain.com/ride/707879...mc-c-k-pick-up

08-20-2010, 10:45 AM	#4
soule64 Registered User Join Date: Feb 2008 Location: Huntsville, AL Posts: 197	Re: What to use for lower radiator hose? I used the stock 350 hose that was originally in the truck. I had to trim it down a little, but it also fit very well

08-20-2010, 11:10 AM	#6
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: What to use for lower radiator hose? could I see some pictures please? the angle of the waterpump and radiator is extreme imo and my stock lower hose kinked pretty bad so I used a flex hose which I dont like, please show me what you did __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

08-20-2010, 11:26 AM	#7
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Re: What to use for lower radiator hose? This is the hose off of the 2006 engine. I imagine they would be the same from 99-07 at least. I also trimmed a little off the water pump end. I could have used either this hose or the one off of the small block, but this one was in much better shape, so I used it. Fits perfect with no kinks. __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

08-20-2010, 11:32 AM	#8
chevydog66 GM ONLY BABY!!! Join Date: Oct 2003 Location: Fort Wayne, IN. Posts: 1,998	Re: What to use for lower radiator hose? Kewl, thanks again Glock. __________________ 2 wrongs don't make a right, but 3 lefts do. 66 Chevelle Malibu 406ci, 573hp, 10.99@121mph 96 Chevy Silverado Z71 72 GMC 1500 Super Custom LS 6.0/4L65 on airride http://www.cardomain.com/ride/707879...mc-c-k-pick-up

08-20-2010, 07:44 PM	#9
chevydog66 GM ONLY BABY!!! Join Date: Oct 2003 Location: Fort Wayne, IN. Posts: 1,998	Re: What to use for lower radiator hose? I bought 1 for a 02 and since I have a/c already in my truck the inlet and outlet of the radiator is bigger, therefore I really had to stretch the hoses to get them on. what a pita. __________________ 2 wrongs don't make a right, but 3 lefts do. 66 Chevelle Malibu 406ci, 573hp, 10.99@121mph 96 Chevy Silverado Z71 72 GMC 1500 Super Custom LS 6.0/4L65 on airride http://www.cardomain.com/ride/707879...mc-c-k-pick-up

08-21-2010, 01:32 PM	#10
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: What to use for lower radiator hose? glock, how wide is ur radiator, I have the stock 65 and it is only like 25" wide so the lower hose is really contorted. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!* Last edited by Clyde65; 08-21-2010 at 01:33 PM.

08-21-2010, 07:06 PM	#11
OKGMC4 Registered User Join Date: Oct 2009 Location: Broken Arrow, OK Posts: 1,245	Re: What to use for lower radiator hose? Ya, how wide is the radiator? I found the perfect one for my 56 but it's a narrow radiator. 21710 Gates, but the 90 degree turn on the end has to be cut off. Attached Images __________________ 56 GMC BUILD THREAD: http://67-72chevytrucks.com/vboard/s...d.php?t=368649 69 long bed Chevy turned 67 gmc jimmy roadster: https://67-72chevytrucks.com/vboard/...d.php?t=851167

08-22-2010, 11:45 PM	#12
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Re: What to use for lower radiator hose? It's about 28.5" inside the tanks. It's the truck's original radiator. __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.