ME 86 3500 parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mainermikeyd · 09-05-2010, 07:36 AM

crew cab is all torn down here are a few of the parts Im looking to get rid of all prices are without shipping an OBRO an open to trades many more photos to come

Wire harness from fuse block through interior AC, cruise $100
Drip rails (crew cab) $50 very good shape few dents an scrapes
AC unit including core an hoses $100 Vacuum operated
Hydro boost $50 without steering box $75 with box
Power window/lock harness with motors $50
Rear air bags without air hoses $40
Complete dual exhaust, side exit with HD emissions manifolds $100

**ScottH** · 09-05-2010, 09:34 AM

Would u happen to have a good a/c compressor?

mainermikeyd · 09-05-2010, 02:39 PM

Yes i do scotth its still on motor, blew cold before i removed motor

GmtGmt · 09-05-2010, 03:30 PM

Rear air bags without air hoses $40

got a pic of those?

**ScottH** · 09-05-2010, 07:35 PM

could u post a pic and LMK how much shipped to 08753?

Thanks.

qksilver · 09-05-2010, 09:42 PM

I am interested in the hydro boost unit but have some questions. I am converting a 79 burb from a 1/2 to 3/4 and want to put a hydro unit on it. Not to familiar with the 73/87 trucks as i am with 72 and older. Will this unit bolt up to a 78 firewall. I know about hose routing etc so that isn't a problem.

If this will bolt up to a 78 firewall I want to buy it. I am leaving for a couple of days and will be back Wednesday night. If someone else wants it , no problem , if not i will check back then.

Thanks,
Steve

mainermikeyd · 09-05-2010, 10:06 PM

heres some more

door seals in A1 condition $25
Seat belt complete crew cab (blue) $40
Radio/cassette have to find knobs $40
complete hinge set with bolts in GREAT shape $30

**ScottH** · 09-06-2010, 10:50 AM

Did this have a four headlight setup? Maybe be in need of the wiring for one.

LMK on compressor whenever u can.

Thanks.
Scott

GmtGmt · 09-06-2010, 12:07 PM

about about those airbags? would like a set for my dually truck so i might be interrested

qksilver · 09-08-2010, 08:25 PM

checking back.........

thanks,
Steve

*Stitch* · 09-08-2010, 09:03 PM

Quote:

Originally Posted by qksilver

I am interested in the hydro boost unit but have some questions. I am converting a 79 burb from a 1/2 to 3/4 and want to put a hydro unit on it. Not to familiar with the 73/87 trucks as i am with 72 and older. Will this unit bolt up to a 78 firewall. I know about hose routing etc so that isn't a problem.

If this will bolt up to a 78 firewall I want to buy it. I am leaving for a couple of days and will be back Wednesday night. If someone else wants it , no problem , if not i will check back then.

Thanks,
Steve

you should have no problems bolting the hydroboost up to the 78 firewall...

qksilver · 09-09-2010, 09:20 AM

Thx

GmtGmt · 09-09-2010, 10:53 AM

any news on the airbags? im really interested

mainermikeyd · 09-09-2010, 08:55 PM

GMT still workin on gettin the air bags off bolts are a little rusty really don't wanna torch the bolts rubber versus heat doesnt mix well I'll give her hell tomorrow an let ya know sorry bout the hold up

qksilver · 09-10-2010, 06:04 PM

let me know about the booster unit.
If you can pm me that would be great.
Thanks,
Steve

BigRed76 · 09-14-2010, 12:20 AM

Do you have a stock set of side mirrors?

nplocoman · 09-15-2010, 12:53 AM

I need 1 clearance lamp lens. Not worth the effort, but I will ask anyway.

mainermikeyd · 10-03-2010, 05:45 PM

more pics all parts are still BO or BRO

control arms $40
cab mounts $20

olblue60@aol.com · 10-09-2010, 10:03 PM

Driveshaft?

mainermikeyd · 10-10-2010, 08:07 PM

Yes I have the driveshaft still intact havent seperated it yet thinkin like $50??

olblue60@aol.com · 10-10-2010, 08:24 PM

I'm interested. Can we confirmthe u joint size at the differential? My dana 60 takes a ujoint 3 3/8 wide with 1 1/4 inch caps. I believe the driveshaft I NEED is about 4 1/4 inches in diameter. ?? Is yours 2 or 4 wheel drive? I will consider either. My truck is 4x4 but what I really need is a 4x4 shaft or just the end cut off a 2wd and I would weld it to mine, to save some $ on shipping. Thanks

John

mainermikeyd · 10-11-2010, 08:34 PM

K I will check an measure at work tomorrow an it is a 2wd

apollos1970 · 10-16-2010, 03:22 PM

would you happen to have a smog pump i just need it for a dummy for my serpentine pulley setup

GmtGmt · 10-16-2010, 03:43 PM

what about those air bags?

joe231 · 10-18-2010, 09:38 AM

I'm also interested in the air bags.
What size are they?
Are they helper bags with brackets?
Posted via Mobile Device

09-05-2010, 07:36 AM	#1
mainermikeyd Registered User Join Date: Sep 2008 Location: Limington, ME Posts: 290	86 3500 parts crew cab is all torn down here are a few of the parts Im looking to get rid of all prices are without shipping an OBRO an open to trades many more photos to come Wire harness from fuse block through interior AC, cruise $100 Drip rails (crew cab) $50 very good shape few dents an scrapes AC unit including core an hoses $100 Vacuum operated Hydro boost $50 without steering box $75 with box Power window/lock harness with motors $50 Rear air bags without air hoses $40 Complete dual exhaust, side exit with HD emissions manifolds $100 Attached Images __________________ Once a Marine Always a Marine OOH-RAH GM Fanatic 1982 K20 4" Rancho lift 350cid, edelbrock performer intake 1405 carb, hedman headers, TH350, " Wheres the MUD!!!!!!!!!!" 1986 c30 camper special 454, th400 (for sale) 1984 K10 Big Ten (project) needs motor 1984 C10 355, 700r4, (project) needs shortbox bed

09-05-2010, 09:34 AM	#2
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: 86 3500 parts Would u happen to have a good a/c compressor? __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

09-05-2010, 02:39 PM	#3
mainermikeyd Registered User Join Date: Sep 2008 Location: Limington, ME Posts: 290	Re: 86 3500 parts Yes i do scotth its still on motor, blew cold before i removed motor __________________ Once a Marine Always a Marine OOH-RAH GM Fanatic 1982 K20 4" Rancho lift 350cid, edelbrock performer intake 1405 carb, hedman headers, TH350, " Wheres the MUD!!!!!!!!!!" 1986 c30 camper special 454, th400 (for sale) 1984 K10 Big Ten (project) needs motor 1984 C10 355, 700r4, (project) needs shortbox bed

09-05-2010, 07:35 PM	#5
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: 86 3500 parts could u post a pic and LMK how much shipped to 08753? Thanks. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

09-05-2010, 09:42 PM	#6
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: 86 3500 parts I am interested in the hydro boost unit but have some questions. I am converting a 79 burb from a 1/2 to 3/4 and want to put a hydro unit on it. Not to familiar with the 73/87 trucks as i am with 72 and older. Will this unit bolt up to a 78 firewall. I know about hose routing etc so that isn't a problem. If this will bolt up to a 78 firewall I want to buy it. I am leaving for a couple of days and will be back Wednesday night. If someone else wants it , no problem , if not i will check back then. Thanks, Steve

09-05-2010, 10:06 PM	#7
mainermikeyd Registered User Join Date: Sep 2008 Location: Limington, ME Posts: 290	Re: 86 3500 parts heres some more door seals in A1 condition $25 Seat belt complete crew cab (blue) $40 Radio/cassette have to find knobs $40 complete hinge set with bolts in GREAT shape $30 Attached Images __________________ Once a Marine Always a Marine OOH-RAH GM Fanatic 1982 K20 4" Rancho lift 350cid, edelbrock performer intake 1405 carb, hedman headers, TH350, " Wheres the MUD!!!!!!!!!!" 1986 c30 camper special 454, th400 (for sale) 1984 K10 Big Ten (project) needs motor 1984 C10 355, 700r4, (project) needs shortbox bed

09-06-2010, 10:50 AM	#8
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: 86 3500 parts Did this have a four headlight setup? Maybe be in need of the wiring for one. LMK on compressor whenever u can. Thanks. Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

09-08-2010, 08:25 PM	#10
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: 86 3500 parts checking back......... thanks, Steve

09-09-2010, 09:20 AM	#12
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: 86 3500 parts Thx

09-09-2010, 08:55 PM	#14
mainermikeyd Registered User Join Date: Sep 2008 Location: Limington, ME Posts: 290	Re: 86 3500 parts GMT still workin on gettin the air bags off bolts are a little rusty really don't wanna torch the bolts rubber versus heat doesnt mix well I'll give her hell tomorrow an let ya know sorry bout the hold up __________________ Once a Marine Always a Marine OOH-RAH GM Fanatic 1982 K20 4" Rancho lift 350cid, edelbrock performer intake 1405 carb, hedman headers, TH350, " Wheres the MUD!!!!!!!!!!" 1986 c30 camper special 454, th400 (for sale) 1984 K10 Big Ten (project) needs motor 1984 C10 355, 700r4, (project) needs shortbox bed

09-10-2010, 06:04 PM	#15
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: 86 3500 parts let me know about the booster unit. If you can pm me that would be great. Thanks, Steve

09-14-2010, 12:20 AM	#16
BigRed76 Registered User Join Date: Jan 2010 Location: Loveland, CO Posts: 1,921	Re: 86 3500 parts Do you have a stock set of side mirrors? __________________ Zach 1970 Chevrolet Custom Camper K20 1971 GMC Super K2500, 12V/NV4500 swap in progress 1971 Chevrolet Custom C10 1972 Chevrolet Custom Deluxe C20, 5.3/4L60E 1972 Oldsmobile Cutlass Supreme, 455/TH400, 3.73 posi 2004 GMC Sierra 2500HD, LB7/Allison, CCSB 2005 GMC Sierra 1500, 5.3/4L60E, CCSB

09-15-2010, 12:53 AM	#17
nplocoman never finish start another Join Date: Mar 2007 Location: North Platte Nebraska Posts: 432	Re: 86 3500 parts I need 1 clearance lamp lens. Not worth the effort, but I will ask anyway.

10-03-2010, 05:45 PM	#18
mainermikeyd Registered User Join Date: Sep 2008 Location: Limington, ME Posts: 290	Re: 86 3500 parts more pics all parts are still BO or BRO control arms $40 cab mounts $20 Attached Images __________________ Once a Marine Always a Marine OOH-RAH GM Fanatic 1982 K20 4" Rancho lift 350cid, edelbrock performer intake 1405 carb, hedman headers, TH350, " Wheres the MUD!!!!!!!!!!" 1986 c30 camper special 454, th400 (for sale) 1984 K10 Big Ten (project) needs motor 1984 C10 355, 700r4, (project) needs shortbox bed

10-09-2010, 10:03 PM	#19
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Re: 86 3500 parts Driveshaft? __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide



Register or Log In To remove these advertisements.

10-10-2010, 08:07 PM	#20
mainermikeyd Registered User Join Date: Sep 2008 Location: Limington, ME Posts: 290	Re: 86 3500 parts Yes I have the driveshaft still intact havent seperated it yet thinkin like $50?? __________________ Once a Marine Always a Marine OOH-RAH GM Fanatic 1982 K20 4" Rancho lift 350cid, edelbrock performer intake 1405 carb, hedman headers, TH350, " Wheres the MUD!!!!!!!!!!" 1986 c30 camper special 454, th400 (for sale) 1984 K10 Big Ten (project) needs motor 1984 C10 355, 700r4, (project) needs shortbox bed

10-10-2010, 08:24 PM	#21
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Re: 86 3500 parts I'm interested. Can we confirmthe u joint size at the differential? My dana 60 takes a ujoint 3 3/8 wide with 1 1/4 inch caps. I believe the driveshaft I NEED is about 4 1/4 inches in diameter. ?? Is yours 2 or 4 wheel drive? I will consider either. My truck is 4x4 but what I really need is a 4x4 shaft or just the end cut off a 2wd and I would weld it to mine, to save some $ on shipping. Thanks John __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide

10-11-2010, 08:34 PM	#22
mainermikeyd Registered User Join Date: Sep 2008 Location: Limington, ME Posts: 290	Re: 86 3500 parts K I will check an measure at work tomorrow an it is a 2wd __________________ Once a Marine Always a Marine OOH-RAH GM Fanatic 1982 K20 4" Rancho lift 350cid, edelbrock performer intake 1405 carb, hedman headers, TH350, " Wheres the MUD!!!!!!!!!!" 1986 c30 camper special 454, th400 (for sale) 1984 K10 Big Ten (project) needs motor 1984 C10 355, 700r4, (project) needs shortbox bed

10-16-2010, 03:22 PM	#23
apollos1970 Registered User Join Date: Oct 2009 Location: Fort Lauderdale, FL Posts: 70	Re: 86 3500 parts would you happen to have a smog pump i just need it for a dummy for my serpentine pulley setup __________________ 1970 c-10 406 or 383/400 4.5/6 work in progress 1985 c-10 454/400 4.5/6 work in progress 1955 bel-air 383/700r4 2001 dodge cummins 600hp daily driver

10-18-2010, 09:38 AM	#25
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: 86 3500 parts I'm also interested in the air bags. What size are they? Are they helper bags with brackets? Posted via Mobile Device __________________ *CHEVY ONLY*

Register or Log In To remove these advertisements.