|
02-24-2003, 09:42 PM
|
#1 |
|
Project92 SWB stepside
Join Date: Feb 2003
Location: Louisville KY
Posts: 4,792
|
aftermarket a arms
Does anyone make a aftermarket arm kit at a reasonable price? My truck is a 83 1/2 ton Thanks
__________________
92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448 |
|
|
|
02-24-2003, 09:53 PM
|
#2 |
|
Account Suspended
Join Date: Jan 2003
Location: Santa Rosa Ca. /Prescott Az.
Posts: 169
|
Have you considered making your own? If you cut the ball joint end off the lower arm and reweld it back on with a (Z)type section you will get a 3" to 4" drop. It worked for me.
|
|
|
|
|
02-24-2003, 09:56 PM
|
#3 |
|
Project92 SWB stepside
Join Date: Feb 2003
Location: Louisville KY
Posts: 4,792
|
I would like to go with a stock replacement with no drop at all. I have a custom fabricated front k member that will give me 2" plus my airride. Thanks!!
__________________
92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448 |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
