|
09-24-2010, 03:23 PM
|
#1 |
|
Registered User
Join Date: May 2010
Location: Tucson, AZ
Posts: 54
|
DJM lowering kit
Has anyone installed a DJM lowering kit on a 72" C10? I've got a 3/5 kit I'm getting ready to install and wonder if there is anything I should know before I start tearing things apart. I got the kit with the 3" drop lower control arms (using stock springs) and the rear flip kit. If you've done one, please let me know if you had any unforeseen snags. Thanks.
|
|
|
|
09-24-2010, 06:24 PM
|
#2 |
|
Moderator
 
Join Date: Jul 2006
Location: Ozark, MO
Posts: 4,897
|
Re: DJM lowering kit
I have the DJM lower arms and 4" springs in the rear. It's been 10 years...but I don't remember it being that difficult. Secure (chain) springs, unbolt lower ball joint (back the nut off a bit) and beat the heck out of it to unseat it it, remove the spring and unbolt the lower arm. Reverse the process and voila!
__________________
'86 GMC C30 Crew ~ '86 C20 Crew ~ '79 K15 Sierra Grande ~ '76 Blazer 2wd ~ '74K10 ~ '71 Cheyenne swb ~'50 3100 bagged ~ '80 Wife ~ Late model kids
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
