10-01-2010, 02:37 AM | #1 |
Registered User
Join Date: Apr 2009
Location: swindon, england
Posts: 290
|
Lowering front bumper
I am going to lower my front bumper so the top edge of the bumper looks in thine with the rounded body panel under the grill,
Q. has anyone done this also. |
10-01-2010, 11:10 AM | #2 |
It's Better With Nitro
Join Date: Apr 2008
Location: Chino Hills, CA
Posts: 2,262
|
Re: Lowering front bumper
I've done this on other vehicles (not a mid-year truck). What I've done in the past was weld up the existing carriage bolt holes, and then mock up the bumper where I wanted to re-position it. I would then mark where the new mount holes will need to be punched or drilled. Sounds like a neat idea. Good luck.
__________________
1963 C-10: Deluxe-optioned cab, shortbed, fleetside Pontiac 462 ci, Kauffman D-Port alum. heads 4L80E, narrowed sheetmetal Ford 9-inch Tubular front and rear suspension Custom 6-piston front disc and 4-piston rear disc brakes |
10-01-2010, 11:39 AM | #3 |
Registered User
Join Date: Apr 2007
Location: gilbert, az
Posts: 392
|
Re: Lowering front bumper
I like the idea too. the front bumper sits higher than the rest of the truck for sure. also the fronts always look pretty busy or crammed together...making it a bit taller should help that.
__________________
"Do what you want to the girl, but leave me alone!" |
10-01-2010, 12:52 PM | #4 |
Who Me?
Join Date: Sep 2010
Location: Royal Palm Beach, FL
Posts: 4,067
|
Re: Lowering front bumper
Anyone have pics of what this looks like when done?
__________________
Steve 1997 Tahoe LT 4D 2WD (DD) 2001 Blazer 4D 2WD 1961 Apache 10 (sold) 1965 C10 Stepper (sold) |
10-01-2010, 03:46 PM | #5 |
Registered User
Join Date: Apr 2009
Location: swindon, england
Posts: 290
|
Re: Lowering front bumper
I think about 1 and a quater inch, would do it, a z cut in the ver tip af the chassis,
|
10-01-2010, 07:14 PM | #6 |
1961 crewcab
Join Date: Dec 2007
Location: missoula, mt
Posts: 6,164
|
Re: Lowering front bumper
the front frame horns conform to the shape of the bumper, so I would suspect that the thing to do would be is just slice them off, leave 'em bolted to the bumper, drop the bumper, and weld 'em back where the new location is.
after that then pull the bumper, and weld in some gussets.
__________________
60 build: http://67-72chevytrucks.com/vboard/s...d.php?t=280904 61 crew build: http://67-72chevytrucks.com/vboard/s...d.php?t=646830 63 build: http://67-72chevytrucks.com/vboard/s...d.php?t=336537 64 'burb build: http://67-72chevytrucks.com/vboard/s...d.php?t=448681 65 'burb build: http://67-72chevytrucks.com/vboard/s...d.php?t=590715 65 build: http://67-72chevytrucks.com/vboard/s...d.php?t=281955 |
10-01-2010, 10:48 PM | #7 |
Registered User
Join Date: Jul 2010
Location: Snowflake Az.
Posts: 86
|
Re: Lowering front bumper
post pics when ur done
|
10-01-2010, 11:58 PM | #8 |
Redneck Hillbilly
Join Date: Jan 2010
Location: Backwoods
Posts: 1,307
|
Re: Lowering front bumper
Neat idea, would like to see the in progress as well as the finished pics if possible.
|
10-02-2010, 12:38 AM | #9 | |
60-66 Nut
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: Lowering front bumper
This is exactly how I would do this. The bumper could also be moved closer to the grill panel at the same time
I agree we need to see some pics of this mod. Quote:
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE Last edited by Captainfab; 10-02-2010 at 12:39 AM. |
|
10-02-2010, 10:14 AM | #10 |
Account Suspended
Join Date: Sep 2009
Location: High Plains of Colorado
Posts: 2,485
|
Re: Lowering front bumper
While I understand that lowering the front bumper would look better as viewed directly from the front of the truck I believe this will not look better from the side. In the stock configuration the bottom of the front bumper is already a bit lower than the lower front fender. Dropping it further will make the "flow" look strange....IMHO. Kind of like a snow plow.
Tucking the bumper closer to the body would look better... my bumper is bent and is closer on the passenger side than the drivers side. Visually the bent side looks better than the stock side! Perhaps I should driver into something on the drivers side! The Larry, Daryl and Daryl Custom Shop method. Last edited by lakeroadster; 10-02-2010 at 10:24 AM. |
10-02-2010, 11:10 PM | #11 | |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,066
|
Re: Lowering front bumper
Quote:
Since my build is on a 68 frame, I wasn't 100% certain where the bumper needed to be w/o swapping the body. So I made front bumper brackets much like rear bumper brackets (instead of the fixed mounting position on the frame horns). This should allow me a little wiggle room to place the bumper in an optimal position vs. the body. Still haven't swapped the body so I don't know how well it's going to work.
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
10-03-2010, 08:37 AM | #12 |
Account Suspended
Join Date: Sep 2009
Location: High Plains of Colorado
Posts: 2,485
|
Re: Lowering front bumper
Frizzle Fry's Truck
|
10-03-2010, 08:38 AM | #13 |
Account Suspended
Join Date: Sep 2009
Location: High Plains of Colorado
Posts: 2,485
|
Re: Lowering front bumper
The only front bumper mod's I can recall is Frizzle Fry's Truck...
Keeping in mind he has done extensive rework of the wheel opening by replacing the stock lip with one from a 67 fender. Here is a link to his photo's http://photobucket.com/albums/y236/e...61%20C5%20PU/? Last edited by lakeroadster; 10-03-2010 at 08:44 AM. |
10-05-2010, 06:38 PM | #14 |
Registered User
Join Date: Apr 2007
Location: gilbert, az
Posts: 392
|
Re: Lowering front bumper
I still dig it. I think Im gunna pull the trigger on this. Hate how high the bumper sits compared to the rest of the truck. Worse comes to worse a fella could extend the fender in the front down a bit.
__________________
"Do what you want to the girl, but leave me alone!" |
10-05-2010, 09:08 PM | #15 | |
Registered User
Join Date: Aug 2005
Location: Hillsboro Oregon
Posts: 6,449
|
Re: Lowering front bumper
Quote:
|
|
10-05-2010, 10:19 PM | #16 |
Registered User
Join Date: Jul 2005
Location: Spanaway, WA
Posts: 103
|
Re: Lowering front bumper
I put a bumper off a 67-72 chevy truck, just hung it on the front frame horns, and thought it looked sway to tall. I believe it was only a couple inches taller but it hung down and looked funny compared to the fenders. I'm going to just flip the front bumper, I have a strong dislike for the stock bumpers and their upside down look.
Frizz, do you have any more pics of the wheel arch swap, or someway I could copy your idea without thinking? Looks great with the "radius" look to them Posted via Mobile Device |
10-06-2010, 12:01 AM | #17 |
Registered User
Join Date: Aug 2005
Location: Hillsboro Oregon
Posts: 6,449
|
Re: Lowering front bumper
Don't want to hijack here. Pics are in my PB acct previously linked and some description is in the build thread. PM me if you want more detail.
|
10-06-2010, 08:20 AM | #18 |
Account Suspended
Join Date: Sep 2009
Location: High Plains of Colorado
Posts: 2,485
|
Re: Lowering front bumper
|
10-06-2010, 12:20 PM | #19 | |
Never Ending Projects
Join Date: Jul 2006
Location: San Diego, CA
Posts: 3,836
|
Re: Lowering front bumper
Quote:
Curious if anyone still has pics.
__________________
. 1965 C10 Panel, Tiki Express http://www.67-72chevytrucks.com/vboa...d.php?t=506580 SOLD 1968 Chevy C10, Long, Fleetside, Hot Rod Hauler http://67-72chevytrucks.com/vboard/s...d.php?t=313233 SOLD 1965 Chevy C10, Long, Fleetside, Hot Rod C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415702 SOLD We were given two ears and one mouth for a reason... listen twice as much and speak half as often... |
|
10-06-2010, 02:26 PM | #20 |
Registered User
Join Date: Aug 2007
Location: Phoenix, Or.
Posts: 22
|
Re: Lowering front bumper
I've always thought that chevy screwed up and put the bumper on upside down! I've got some pictures of a couple of trucks with the bumper flipped at home (at work now), but i'll be flipping mine. Have to cut the frame horns off and flip side to side to do it. Just waiting to get my front wrap back on to do it. imo it looks better flipped.
__________________
66 c20 with 1/2 ton 73-87 front and rear suspension 2-1/2" drop spindles, air-bags, c-notch rear frame 463 Pontiac, SRP Pistons, Eagle Crank and Rods Mega-Squirt Fuel Injection |
10-06-2010, 04:38 PM | #21 |
Never Ending Projects
Join Date: Jul 2006
Location: San Diego, CA
Posts: 3,836
|
Re: Lowering front bumper
Cool. Post up some pics.
I have also wondered what a '55 Bel Air bumper would look like. Fill in the apron like the Bel Air too.
__________________
. 1965 C10 Panel, Tiki Express http://www.67-72chevytrucks.com/vboa...d.php?t=506580 SOLD 1968 Chevy C10, Long, Fleetside, Hot Rod Hauler http://67-72chevytrucks.com/vboard/s...d.php?t=313233 SOLD 1965 Chevy C10, Long, Fleetside, Hot Rod C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415702 SOLD We were given two ears and one mouth for a reason... listen twice as much and speak half as often... |
10-06-2010, 05:24 PM | #22 |
Registered User
Join Date: Aug 2005
Location: Hillsboro Oregon
Posts: 6,449
|
Re: Lowering front bumper
Not that it matters, but I think they look dumb flipped. Look at the Belair. Would it look good with the top of the bumper sticking out? Same aesthetic applies to the trucks. That's ok, I'm sure some of the stuff I've done looks weird to some people too.
|
10-06-2010, 05:46 PM | #23 |
Never Ending Projects
Join Date: Jul 2006
Location: San Diego, CA
Posts: 3,836
|
Re: Lowering front bumper
I think I recall Foose doing a Bel Air and flipping and trimming the stock bumper and it really looked sweet... but with Foose doing it, it always ends up looking sweet!
__________________
. 1965 C10 Panel, Tiki Express http://www.67-72chevytrucks.com/vboa...d.php?t=506580 SOLD 1968 Chevy C10, Long, Fleetside, Hot Rod Hauler http://67-72chevytrucks.com/vboard/s...d.php?t=313233 SOLD 1965 Chevy C10, Long, Fleetside, Hot Rod C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415702 SOLD We were given two ears and one mouth for a reason... listen twice as much and speak half as often... |
10-06-2010, 07:55 PM | #24 |
Registered User
Join Date: Jul 2005
Location: Spanaway, WA
Posts: 103
|
Re: Lowering front bumper
I have a pic I saved to my phone, it is only a side pic, but I can't post it from my phone. I have seen a few where they flipped the bumper but the angle was off so it looked goofy. I have a camaro clip so I have to redo bumper mounts anyway so I will mount the bumper to a correct angle. If I can find a pic I will post it.
Posted via Mobile Device This isn't the pic I was thinking of but kt shows it a little better, might wanna zoom in a little as the pic maybe small Last edited by ConnDemned; 10-06-2010 at 08:47 PM. |
Bookmarks |
|
|