NEED help swaping out front ends on 69 c10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mwilliams5891 · 10-08-2010, 02:37 PM

Hey so I just bought a running 1969 C-10 with tons of parts for $1500! WOOT! WOOT!

needless to say im excited. so I pretty much have two of everything: Cabs, hoods, rear end, front end, 3 dash cluster, bench seats, fenders, and tons more. but i wanted to swap out the front ends because the other one has power steering also was going to swap for disc brakes...

so anyone want to help walk me through some of this or show me post

Im a pre-med student doing this for his wife so i dont have all the time or money in the world. but im pretty handy and determined.

Matthew

Youngbuck7072 · 10-08-2010, 02:44 PM

sweet! i dont have anyway to help you. but just saying high to a close neighbor

Youngbuck7072 · 10-08-2010, 02:46 PM

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

Myself · 10-08-2010, 02:56 PM

I think all you need to do is swap out the spindles for the disc brake setup. Then you'll need the prop. valve from the disc brake setup. Then just change the steering boxes out and add a power steering pump.

mwilliams5891 · 10-08-2010, 02:57 PM

Quote:

Originally Posted by Youngbuck7072

oh, and if the bench is in good condition, im willing to buy it ??

the bench is in great condition its grey i want a black one.

and nice to see some close by! have you ever swapped for disc brakes or rear ends?

Youngbuck7072 · 10-08-2010, 03:04 PM

no i havent but im only fifteen so thats my alabie lol. i heard the old caprice's have a setup the swaps right in, but im not totally sure on that. i have a bench seat that is pretty torn up(no cover over the drivers side foam), that i could give plus however much you want for the seat u got. that way you have somethin to it on

mwilliams5891 · 10-08-2010, 03:12 PM

Quote:

Originally Posted by Youngbuck7072

no i havent but im only fifteen so thats my alabie lol. i heard the old caprice's have a setup the swaps right in, but im not totally sure on that. i have a bench seat that is pretty torn up(no cover over the drivers side foam), that i could give plus however much you want for the seat u got. that way you have somethin to it on

...i dont know maybe...im thinking of just putting a black cover on because its perfect minus a little oil stain under the drivers butt..... but if i change my mind i will let you know

Youngbuck7072 · 10-08-2010, 03:16 PM

aight man keep in touch, its good to have people near by

mwilliams5891 · 10-08-2010, 03:17 PM

Quote:

Originally Posted by Youngbuck7072

aight man keep in touch, its good to have people near by

of course and if you ever need a hand moving big parts i know how hard it is to find help sometimes!!!

Youngbuck7072 · 10-08-2010, 03:19 PM

definitley. hey, what power train you got in that 69?

Youngbuck7072 · 10-08-2010, 03:22 PM

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

mwilliams5891 · 10-08-2010, 03:31 PM

right now just a inline 6 i think its the 250 but not for sure and a 4 speed manual tranny.

cant decide if i want a 350 or 327 in but i know i want a 5 speed manual sometime lol and i might need the power steering pump i need to check the parts more and see what i need on that front end.

Youngbuck7072 · 10-08-2010, 03:47 PM

do you want one with the trim strip the says chevrolet or the full maetal one with the big chevroleet ?

Youngbuck7072 · 10-08-2010, 05:39 PM

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

**El Jay** · 10-08-2010, 06:08 PM

Quote:

Originally Posted by Youngbuck7072

oh, and if the bench is in good condition, im willing to buy it ??

Quote:

Originally Posted by Youngbuck7072

oh and if you need a power steering pump i have one that ill sell you cheeep

[quote=mwilliams5891;4230694]right now just a inline 6 i think its the 250 but not for sure and a 4 speed manual tranny.

cant decide if i want a 350 or 327 in but i know i want a 5 speed manual sometime lol and i might need the power steering pump i need to check the parts more and see what i need on that front end.

hey you know anyone who has a tail gate for a 69? i really want one[/quote]

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

10-08-2010, 02:37 PM	#1
mwilliams5891 Registered User Join Date: Aug 2010 Location: Springfield, Oregon Posts: 164	NEED help swaping out front ends on 69 c10 Hey so I just bought a running 1969 C-10 with tons of parts for $1500! WOOT! WOOT! needless to say im excited. so I pretty much have two of everything: Cabs, hoods, rear end, front end, 3 dash cluster, bench seats, fenders, and tons more. but i wanted to swap out the front ends because the other one has power steering also was going to swap for disc brakes... so anyone want to help walk me through some of this or show me post Im a pre-med student doing this for his wife so i dont have all the time or money in the world. but im pretty handy and determined. Matthew

10-08-2010, 02:44 PM	#2
Youngbuck7072 Registered User Join Date: Sep 2010 Location: Eugene, Or. Posts: 322	Re: NEED help swaping out front ends on 69 c10 sweet! i dont have anyway to help you. but just saying high to a close neighbor __________________ ........................ __ ............._______\|__\____ ............\|_({})______({})] ................(O)..........(O)

10-08-2010, 02:46 PM	#3
Youngbuck7072 Registered User Join Date: Sep 2010 Location: Eugene, Or. Posts: 322	Re: NEED help swaping out front ends on 69 c10 Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here If you need any further assistance with that please contact any Admin for help. __________________ ........................ __ ............._______\|__\____ ............\|_({})______({})] ................(O)..........(O) Last edited by Sillyoldman; 10-08-2010 at 08:19 PM.

10-08-2010, 02:56 PM	#4
Myself Registered User Join Date: Oct 2005 Location: Northern Arkansas Posts: 1,142	Re: NEED help swaping out front ends on 69 c10 I think all you need to do is swap out the spindles for the disc brake setup. Then you'll need the prop. valve from the disc brake setup. Then just change the steering boxes out and add a power steering pump.

10-08-2010, 03:04 PM	#6
Youngbuck7072 Registered User Join Date: Sep 2010 Location: Eugene, Or. Posts: 322	Re: NEED help swaping out front ends on 69 c10 no i havent but im only fifteen so thats my alabie lol. i heard the old caprice's have a setup the swaps right in, but im not totally sure on that. i have a bench seat that is pretty torn up(no cover over the drivers side foam), that i could give plus however much you want for the seat u got. that way you have somethin to it on __________________ ........................ __ ............._______\|__\____ ............\|_({})______({})] ................(O)..........(O)

10-08-2010, 03:16 PM	#8
Youngbuck7072 Registered User Join Date: Sep 2010 Location: Eugene, Or. Posts: 322	Re: NEED help swaping out front ends on 69 c10 aight man keep in touch, its good to have people near by __________________ ........................ __ ............._______\|__\____ ............\|_({})______({})] ................(O)..........(O)

10-08-2010, 03:19 PM	#10
Youngbuck7072 Registered User Join Date: Sep 2010 Location: Eugene, Or. Posts: 322	Re: NEED help swaping out front ends on 69 c10 definitley. hey, what power train you got in that 69? __________________ ........................ __ ............._______\|__\____ ............\|_({})______({})] ................(O)..........(O)

10-08-2010, 03:22 PM	#11
Youngbuck7072 Registered User Join Date: Sep 2010 Location: Eugene, Or. Posts: 322	Re: NEED help swaping out front ends on 69 c10 Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here If you need any further assistance with that please contact any Admin for help. __________________ ........................ __ ............._______\|__\____ ............\|_({})______({})] ................(O)..........(O) Last edited by Sillyoldman; 10-08-2010 at 08:18 PM.

10-08-2010, 03:31 PM	#12
mwilliams5891 Registered User Join Date: Aug 2010 Location: Springfield, Oregon Posts: 164	Re: NEED help swaping out front ends on 69 c10 right now just a inline 6 i think its the 250 but not for sure and a 4 speed manual tranny. cant decide if i want a 350 or 327 in but i know i want a 5 speed manual sometime lol and i might need the power steering pump i need to check the parts more and see what i need on that front end. Last edited by 70cst; 10-08-2010 at 11:53 PM.

10-08-2010, 03:47 PM	#13
Youngbuck7072 Registered User Join Date: Sep 2010 Location: Eugene, Or. Posts: 322	Re: NEED help swaping out front ends on 69 c10 do you want one with the trim strip the says chevrolet or the full maetal one with the big chevroleet ? __________________ ........................ __ ............._______\|__\____ ............\|_({})______({})] ................(O)..........(O)

10-08-2010, 05:39 PM	#14
Youngbuck7072 Registered User Join Date: Sep 2010 Location: Eugene, Or. Posts: 322	Re: NEED help swaping out front ends on 69 c10 Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here If you need any further assistance with that please contact any Admin for help. __________________ ........................ __ ............._______\|__\____ ............\|_({})______({})] ................(O)..........(O) Last edited by Sillyoldman; 10-08-2010 at 08:18 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.