project engine? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

herauf · 01-05-2002, 05:25 PM

my dad is pressuring me to get rid of some of the stuff cluttering up "his" garage. the first thing that needs to go is the old engine out of my blazer....

it is a 1987 350 out of a fuel injected blazer. it threw a bearing and i replaced the engine. haven't had the time or energy to get in and see if it is still useable. (my guess is it would probably work as a 383) i don't have the complete history of the blazer, but i am pretty sure it is the orig. which would give it about 145,000 miles. (it i currently up on an engine stand; $30 for the stand.)

it is FREE!!!, you pick up....

if you are interested please call me @ (408)266-8317 or email me at photoboy79@excite.com

gchemist · 01-06-2002, 12:22 PM

Where you located?

------------------
Gerardo
1983 Custom Truck
TX Plates: "BAD BOW"
http://www.geocities.com/abetterchemist/

**crossy** · 01-06-2002, 04:13 PM

come on gerardo, your slipping LOL. go to profile, san jose, ca

if it is an 87 it will have the one oiece rear main seal ,big aluminum 'collar'. at back of crank.should be a coded date on the rear top edge of block where tranny bolts to it . DAVE

[This message has been edited by crossy (edited 01-06-2002).]

[This message has been edited by crossy (edited 01-06-2002).]

herauf · 01-06-2002, 09:12 PM

are either of you interested?

ryan.

OrangeC10 · 01-07-2002, 12:29 AM

You've got mail!

01-05-2002, 05:25 PM	#1
herauf Registered User Join Date: Feb 2001 Location: san jose, ca Posts: 209	project engine? my dad is pressuring me to get rid of some of the stuff cluttering up "his" garage. the first thing that needs to go is the old engine out of my blazer.... it is a 1987 350 out of a fuel injected blazer. it threw a bearing and i replaced the engine. haven't had the time or energy to get in and see if it is still useable. (my guess is it would probably work as a 383) i don't have the complete history of the blazer, but i am pretty sure it is the orig. which would give it about 145,000 miles. (it i currently up on an engine stand; $30 for the stand.) it is FREE!!!, you pick up.... if you are interested please call me @ (408)266-8317 or email me at photoboy79@excite.com __________________ 1987 k5 4x4...FOR SALE!!! (email for details) will eventually be replaced by a 70-72 4x4 k5

01-06-2002, 12:22 PM	#2
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	Where you located? ------------------ Gerardo 1983 Custom Truck TX Plates: "BAD BOW" http://www.geocities.com/abetterchemist/ __________________ Gerardo a.k.a. Mad Chemist Silverado XST videos

01-06-2002, 04:13 PM	#3
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	come on gerardo, your slipping LOL. go to profile, san jose, ca if it is an 87 it will have the one oiece rear main seal ,big aluminum 'collar'. at back of crank.should be a coded date on the rear top edge of block where tranny bolts to it . DAVE [This message has been edited by crossy (edited 01-06-2002).] [This message has been edited by crossy (edited 01-06-2002).] __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

01-06-2002, 09:12 PM	#4
herauf Registered User Join Date: Feb 2001 Location: san jose, ca Posts: 209	are either of you interested? ryan. __________________ 1987 k5 4x4...FOR SALE!!! (email for details) will eventually be replaced by a 70-72 4x4 k5

01-07-2002, 12:29 AM	#5
OrangeC10 Registered User Join Date: Dec 2000 Location: Hayward Ca USA Posts: 23	You've got mail! __________________ 72 C10 350/350 77 2wd Blazer 350/350 01 F250 Superduty Diesel (Yea, I know)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.