01-01-2002, 09:32 PM | #1 |
Registered User
Join Date: Feb 2000
Location: Maquoketa, Ia/ Orr, Mn
Posts: 3,051
|
gauge help
My gas gauge won't read corectly. I have installed a new ground wire and tired other guages. I have also determined that the sending unit is not faulty. Could it be the printed circuit on the back that is messing the gauge? I have taken the dash pad off and the whole dash is covered with fine dust. Could this be the problem?
__________________
'51 South Bend Model "9A" '56 Chevy 3600 NAPCO '74 Chevy Cheyenne Super K20-restored on 37's '72 GMC Sierra Custom K2500- in progress '08 GMC Envoy Denali '12 GMC Sierra 2500HD Denali '17 GMC Yukon XL VCCA member #58596 http://www.nohrco.com |
01-01-2002, 11:54 PM | #2 |
Account Suspended
Join Date: May 2000
Location: IL
Posts: 0
|
how did you determine the unit is fine ? what does the gauge read at now ?
------------------ A 68 C-10 panel and a 68 dually C-30 dump truck and a couple 71/72 chassis projects. http://messenger.msn.com http://communities.msn.com/196772ChevroletCSTsforever r68c30@hotmail.com |
01-02-2002, 12:52 PM | #3 |
Registered User
Join Date: Feb 2000
Location: Maquoketa, Ia/ Orr, Mn
Posts: 3,051
|
We took the unit out of the tank and moved it by hand and watched the guage. When it read 1/4 tank the unit was on empty and full was past full on the guage. I am cleaning the dash right now. Hopefully this will help.
__________________
'51 South Bend Model "9A" '56 Chevy 3600 NAPCO '74 Chevy Cheyenne Super K20-restored on 37's '72 GMC Sierra Custom K2500- in progress '08 GMC Envoy Denali '12 GMC Sierra 2500HD Denali '17 GMC Yukon XL VCCA member #58596 http://www.nohrco.com |
01-03-2002, 05:28 PM | #4 |
Registered User
Join Date: Feb 2000
Location: Maquoketa, Ia/ Orr, Mn
Posts: 3,051
|
I cleaned up the gauge cluster and that thing was terrible! I had a problem with the little green light for the right blinker always came on when the headlights were on, now it doesn't and I belive the gauge now works again.
__________________
'51 South Bend Model "9A" '56 Chevy 3600 NAPCO '74 Chevy Cheyenne Super K20-restored on 37's '72 GMC Sierra Custom K2500- in progress '08 GMC Envoy Denali '12 GMC Sierra 2500HD Denali '17 GMC Yukon XL VCCA member #58596 http://www.nohrco.com |
01-10-2002, 07:58 PM | #5 |
Registered User
Join Date: Jul 2000
Location: Evansville, Indiana USA
Posts: 485
|
When my truck did that the blinker thing, it was a failing light bulb, I think one of the marker ones that made it do that. I changed the marker bulb, and it made the blinker light stay off.
|
01-12-2002, 01:43 PM | #6 |
laying low
Join Date: Mar 2001
Location: Searcy, Ark. USA
Posts: 13,524
|
I experienced a similar thing with my 85 Blazer. Fuel gauge was all over the place. I replaced the sending unit($$)and checked the ground. Turned out it was the clips behind the gauge that make contact between the gauge posts and the printed circuit. It's right now. Boog.
__________________
Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross |
01-14-2002, 05:51 PM | #7 |
Registered User
Join Date: Feb 2000
Location: Maquoketa, Ia/ Orr, Mn
Posts: 3,051
|
I polished the contacts on the guage and the circuit and the guage has been working now. Thanks guys!
__________________
'51 South Bend Model "9A" '56 Chevy 3600 NAPCO '74 Chevy Cheyenne Super K20-restored on 37's '72 GMC Sierra Custom K2500- in progress '08 GMC Envoy Denali '12 GMC Sierra 2500HD Denali '17 GMC Yukon XL VCCA member #58596 http://www.nohrco.com |
Bookmarks |
|
|