Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
12-05-2010, 09:16 PM | #1 |
Torn between 66 and 78
Join Date: May 2008
Location: So. Cal.
Posts: 253
|
How did they lower my rear?
My truck is a 78 Big 10 shorty. My Uncle who owned it before me had a shop lower it and doesn't know how they did. I am not that familiar with leafs, if it was a 63-66 I wouldn't need to ask, but I need some schooling on this. It is supposed to be a 4" drop.
What ya think? |
12-05-2010, 09:21 PM | #2 |
BAD BOW-Silverado XST
Join Date: May 2000
Location: Senior Member from Austin, TX
Posts: 6,431
|
Re: How did they lower my rear?
Is the front hanger reversed? You'll know because it will have bolts instead of rivets.
The leafs are below the axel. Stock, they are above the axel. Last edited by gchemist; 12-05-2010 at 09:24 PM. |
12-05-2010, 09:25 PM | #3 |
Registered User
Join Date: Dec 2008
Location: Providence Rhode Island
Posts: 404
|
Re: How did they lower my rear?
isn't that a flip kit? normally the leafs are on top of axle
|
12-05-2010, 09:27 PM | #4 |
Torn between 66 and 78
Join Date: May 2008
Location: So. Cal.
Posts: 253
|
Re: How did they lower my rear?
the hanger in the front is still riveted to the frame.
|
12-05-2010, 09:27 PM | #5 |
67-72 parts collector,…
Join Date: Nov 2002
Location: Mid-MO
Posts: 22,700
|
Re: How did they lower my rear?
It's had a flip kit installed.
The rearend is now on top of the leaf springs. Probably a 5" or 6" rear drop. Looks fine to me,... but I'm not sure about the red rubber snubber back by the rear shackle.
__________________
Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 |
12-05-2010, 09:30 PM | #6 |
Torn between 66 and 78
Join Date: May 2008
Location: So. Cal.
Posts: 253
|
Re: How did they lower my rear?
|
12-05-2010, 09:31 PM | #7 | |
Torn between 66 and 78
Join Date: May 2008
Location: So. Cal.
Posts: 253
|
Re: How did they lower my rear?
Quote:
Last edited by CSoliz; 12-05-2010 at 09:34 PM. |
|
12-05-2010, 09:37 PM | #8 |
Torn between 66 and 78
Join Date: May 2008
Location: So. Cal.
Posts: 253
|
Re: How did they lower my rear?
would the snubbers take some of the arch out of leafs giving it less drop?
|
12-05-2010, 09:39 PM | #9 |
Registered User
Join Date: Sep 2008
Location: spinawheel sc
Posts: 108
|
Re: How did they lower my rear?
looks like a bunch of leaf springs.i counted 8 that may be holding you up.is that part of the big 10 package.
|
12-05-2010, 09:43 PM | #10 |
Torn between 66 and 78
Join Date: May 2008
Location: So. Cal.
Posts: 253
|
Re: How did they lower my rear?
it may be, they call it a "heavy half ton". its GVW is about 6200. How many leafs does a regular 1/2t have?
|
12-05-2010, 09:44 PM | #11 |
Registered User
Join Date: Dec 2007
Location: Palmer, Alaska
Posts: 13,821
|
Re: How did they lower my rear?
What size tires?
That is more than 4" in the rear. I'm guessing somewhere in the 5"-7" range Measure from the middle of the wheels to the top of the wheel opening front and rear. Posted via Mobile Device
__________________
CHEVY ONLY Last edited by joe231; 12-05-2010 at 09:45 PM. |
12-05-2010, 09:51 PM | #12 |
Registered User
Join Date: Sep 2008
Location: spinawheel sc
Posts: 108
|
Re: How did they lower my rear?
mine has 5 mines bout that low but its flipped and has 2" rear shacles.
Last edited by 875.3CHEVY; 12-05-2010 at 09:54 PM. Reason: clarifacation |
12-05-2010, 09:52 PM | #13 |
Torn between 66 and 78
Join Date: May 2008
Location: So. Cal.
Posts: 253
|
Re: How did they lower my rear?
they are 26" tall tires.
Center of the wheel to fender (wheel opening) front 14 1/4" rear 15 1/4" |
12-05-2010, 09:57 PM | #14 |
Registered User
Join Date: Dec 2007
Location: Palmer, Alaska
Posts: 13,821
|
Re: How did they lower my rear?
that is a 5/5 drop
http://67-72chevytrucks.com/vboard/s...16#post4331216 looks like just a flip out back
__________________
CHEVY ONLY |
12-05-2010, 10:18 PM | #15 |
yeller
Join Date: Oct 2001
Location: Twin Cities
Posts: 13,824
|
Re: How did they lower my rear?
Measure the leaf pack thickness at the axle, add 3" (axle tube diameter), and there is roughly your drop. You have bout a 6" drop due to the HD leafs in your truck
__________________
Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale |
12-05-2010, 10:57 PM | #16 |
Torn between 66 and 78
Join Date: May 2008
Location: So. Cal.
Posts: 253
|
Re: How did they lower my rear?
So how much lower can I go? and if I want to go lower out back I need to remove leafs and add shackles so I'm not to low, right?
Last edited by CSoliz; 12-05-2010 at 10:57 PM. |
12-06-2010, 12:21 AM | #17 |
At the body shop.
Join Date: Aug 2009
Location: Land of fruits and nuts.
Posts: 5,256
|
Re: How did they lower my rear?
Any much lower and it will need a C-notch
__________________
" That didnt make it any newer " " Dont antique the equipment " |
12-06-2010, 03:28 AM | #18 |
Laid back freak
Join Date: Mar 2008
Location: hastings florida
Posts: 248
|
Re: How did they lower my rear?
I wouldn`t go any lower then that, looks good as it is.I had a flip kit and a 2 inch bell tech hanger drop in the front and a shackle kit in the rear and it was way to low.I sold the bell tech kit and just did a flip kit and it sits level like yours and lowered.So unless you want to spend money you can do a air ride kit but thats all in your budget...
thanks pat
__________________
1980 chevy c10 step side restomod, 1970 cougar convertible 1 OF 24 ever built: 2014 Hyundai Tucson limited (daily driver). |
Bookmarks |
|
|