Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
12-14-2010, 04:56 AM | #1 |
Registered User
Join Date: Nov 2010
Location: Auckland New Zealand
Posts: 8
|
Mustang ll ride height
I have a 1958 Apache 3200 longbed and i want to put a mustang ll ifs in it and want to know how much the truck will be lowered just by installing the ifs kit on the standard drop spindles that comes with the kit?
I want to get the truck as low as i can using a mustang ll ifs and just reseting the leafs and lowering block the rear to get a level ride height. Any help would be great,Cheers |
12-14-2010, 09:28 AM | #2 |
way2lo2
Join Date: Sep 2004
Location: Cleveland , Ohio
Posts: 803
|
Re: Mustang ll ride height
This has a TCI MII with 2" drop spindles and 2 full coils cut in the image that has all the sheetmetal. The pic where the front clip is off is with the coils that came with the MII uncut.
|
12-17-2010, 03:14 AM | #3 |
Registered User
Join Date: Nov 2010
Location: Auckland New Zealand
Posts: 8
|
Re: Mustang ll ride height
Thanks alot for the help,think ill go with the stock spindles for starters.
Any chance you can give me any info about how you lowered the back to the height of your truck? Thanks alot |
12-17-2010, 12:28 PM | #4 |
Senior Member
Join Date: Jul 2010
Location: Dandridge, Tn. USA
Posts: 2,226
|
Re: Mustang ll ride height
Most manufacturers can give you a spec for the spindle hieght. Our Wide-Ride IFS kits put the spindle CL in a range of, "even with the bottom of the rail - to 1" up from the bottom of the rail," at ride hieght. This is with a stock spindle. By knowing the tire size, you can figure out frame hieght. Most IFS kits are close to this range, but ask the company your looking at to give you the info. Good luck
|
12-17-2010, 02:10 PM | #5 | |
way2lo2
Join Date: Sep 2004
Location: Cleveland , Ohio
Posts: 803
|
Re: Mustang ll ride height
Quote:
I took the short bottom leaf and one other out of the spring pack. of course a c-notch was needed as well. Last edited by way2lo2; 12-17-2010 at 02:12 PM. |
|
Bookmarks |
|
|