Help understand wiring.... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72gmcshorty · 01-01-2011, 10:52 PM

Need help understanding how to wire up one of these motors....I purchased a painless kit (#10206: 18 Circuit GM Truck Chassis Wiring Harness 1967 - 1972) for my previous project but never used it...I have the engine from a 2006 truck. It came with the motor wiring harness. My question is, how does the harness from the engine connect to the painless one? Can i even use this painless kit? Is there another painless harness that joins to kit 10206? I'm a little confused. Thanks for any clarification...

72gmcshorty · 01-01-2011, 11:13 PM

I think i found my answer on the painless site. It seem like the harness #60221 would be the one for the motor. I just don't see how it connects with the truck harness at the firewall.

http://www.painlessperformance.com/f...hp?f=23&t=1660

**Clyde65** · 01-03-2011, 01:19 PM

1st. Have you had the 2006 harness modded for use as a stand alone?

2nd. Just install the painless harness for the truck.

3rd. when the 06 harness is modded, you will only need 1 ignition hot and 1 battery hot, along with brake/fuel/speedo wires.

72gmcshorty · 01-03-2011, 10:14 PM

I have not done anything to the 2006 harness yet. I will look into modifying it myself.

**Clyde65** · 01-04-2011, 10:57 AM

You can have your harness moded by someone else if you choose, PM me and I will give you some names if your interested. also those will do a re-flash of your PCM too. Sometimes it is more cost efficient to purchase an aftermarket harness and have someone performance tune the PCM instead of paying for someone to mod the stock harness ( it wont look real pretty) and just take VATS off and eliminate the emissions need.

68MoneyPit · 01-04-2011, 08:13 PM

I just bought a 6.0 and 4l80E with the harness and somehow got put in touch with a guy here in the fort worth area who makes harnesses for this application. I went to look at some of his work today and it is first class. Oh, and did I mention that it was a lot cheaper than the painless kit ?

01-01-2011, 11:13 PM	#2
72gmcshorty Registered User Join Date: Jul 2001 Location: North Delta, British Columbia Posts: 1,344	Re: Help understand wiring.... I think i found my answer on the painless site. It seem like the harness #60221 would be the one for the motor. I just don't see how it connects with the truck harness at the firewall. http://www.painlessperformance.com/f...hp?f=23&t=1660 __________________ 1992 Gmc 2wd 1972 Chevy Blazer 2wd Last edited by 72gmcshorty; 01-01-2011 at 11:20 PM.

01-03-2011, 01:19 PM	#3
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: Help understand wiring.... 1st. Have you had the 2006 harness modded for use as a stand alone? 2nd. Just install the painless harness for the truck. 3rd. when the 06 harness is modded, you will only need 1 ignition hot and 1 battery hot, along with brake/fuel/speedo wires. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

01-03-2011, 10:14 PM	#4
72gmcshorty Registered User Join Date: Jul 2001 Location: North Delta, British Columbia Posts: 1,344	Re: Help understand wiring.... I have not done anything to the 2006 harness yet. I will look into modifying it myself. __________________ 1992 Gmc 2wd 1972 Chevy Blazer 2wd

01-04-2011, 10:57 AM	#5
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: Help understand wiring.... You can have your harness moded by someone else if you choose, PM me and I will give you some names if your interested. also those will do a re-flash of your PCM too. Sometimes it is more cost efficient to purchase an aftermarket harness and have someone performance tune the PCM instead of paying for someone to mod the stock harness ( it wont look real pretty) and just take VATS off and eliminate the emissions need. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

01-01-2011, 10:52 PM	#1
72gmcshorty Registered User Join Date: Jul 2001 Location: North Delta, British Columbia Posts: 1,344	Help understand wiring.... Need help understanding how to wire up one of these motors....I purchased a painless kit (#10206: 18 Circuit GM Truck Chassis Wiring Harness 1967 - 1972) for my previous project but never used it...I have the engine from a 2006 truck. It came with the motor wiring harness. My question is, how does the harness from the engine connect to the painless one? Can i even use this painless kit? Is there another painless harness that joins to kit 10206? I'm a little confused. Thanks for any clarification... __________________ 1992 Gmc 2wd 1972 Chevy Blazer 2wd

01-04-2011, 08:13 PM	#6
68MoneyPit Registered User Join Date: Jan 2007 Location: Weatherford Tx. Posts: 106	Re: Help understand wiring.... I just bought a 6.0 and 4l80E with the harness and somehow got put in touch with a guy here in the fort worth area who makes harnesses for this application. I went to look at some of his work today and it is first class. Oh, and did I mention that it was a lot cheaper than the painless kit ?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.