Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
01-10-2011, 12:09 AM | #1 |
Registered User
Join Date: Jul 2001
Location: North Delta, British Columbia
Posts: 1,344
|
4l60e interchangeable?
What needs to be done to make a 4l60e from a 97 or 99 z28 work with my 2006 5.3 truck motor? My harness is also 2006
__________________
1992 Gmc 2wd 1972 Chevy Blazer 2wd Last edited by 72gmcshorty; 01-10-2011 at 12:19 AM. |
01-10-2011, 12:24 AM | #2 |
Registered User
Join Date: Mar 2010
Location: Red Bud, IL (Home) Newton, IL (Shop)
Posts: 301
|
Re: 4l60e interchangeable?
I had one out of a '95 caprice laying around and had thought about putting it behind my 2002 vortec. I'm not 100% but if I remember right, but they switched them to a pulse width modulated pump in '96 on rwd cars and '97 on trucks I was told that mine would not interchange. From those points up, I am pretty sure they are electronically the same, so yours should work. if you are using one that has the case and bellhousing for a genI/II (one piece case and bellhousing), I think you will need to get the flexplate spacer for running a th350/400 behind a genIII/IV engine.
Last edited by 78bronzechariot; 01-10-2011 at 12:27 AM. |
01-10-2011, 12:24 AM | #3 |
gets board easy.......
Join Date: Mar 2009
Location: Colorado Springs
Posts: 717
|
Re: 4l60e interchangeable?
should bolt right up, maybe just change trans mount...and the connector should work also
|
Bookmarks |
|
|