VA CPP 13" Modular BIG Brake setup!!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

VA72C10 · 01-27-2011, 12:16 AM

Price reduced!!!!

I got this setup from a CPP dealer who had mocked it up only. All new parts. 6 lug setup for our trucks (6 X 5.5) 13" BIG cross drilled and gas slotted rotors. I have the upgraded braided stainless brake lines (not pictured but new in plastic). Has the brackets. Comes with the black Large 2 piston Calipers that are loaded with brake pads. Hubs have been assembled for you

. Will need one grease seal but otherwise ready to go on. Comes Without the spindles. Will need to use the specific CPP spindles (299) You can choose what year ball joints and if you go with stock or 2" modular drop spindle. The spindles are on backorder right now so don't plan on these if you're on a tight deadline. But this is a way to save a couple hundred dollars on new parts!!!

The kits run 1148 plus shipping with the braided brake line upgrade. Subtract the 299 for the spindles and you're at 849. I am asking 600 FIRM plus shipping. Shipping will be a little over 50 in the CONUS and I will cover anything over so 650 SHIPPED!!!

Save $250 when you figure in shipping!!!

post here if interested. I accept paypal (if buyer pays fees) or postal money order.

VA72C10 · 01-27-2011, 12:32 AM

Here's a link to the CPP page they are on

http://www.classicperform.com/6092chevtrk.htm

Kit depends on ball joint/tie rods for spindle....
6370SWBK65213 63-70
7172SWBK65213 71-72
7387SWBK65213 73-87

If you haven't purchased ball joints/tie rods I'd recommend going with the 73-87 when you buy them and the spindles as they are readily available at parts stores and cheaper

VA72C10 · 01-29-2011, 12:12 AM

Who wants BIG brakes?

c10seconds · 01-29-2011, 12:24 AM

67cheby NEEDS these!

Posted via Mobile Device

VA72C10 · 01-30-2011, 07:57 PM

Quote:

Originally Posted by c10seconds

67cheby NEEDS these!

Posted via Mobile Device

I agree they'd look sweet but don't think they'd work with his dropmember and the backspacing of the rims...

Back up top

VA72C10 · 01-31-2011, 03:01 PM

Quote:

Originally Posted by VA72C10

Who wants BIG brakes?

VA72C10 · 02-01-2011, 04:03 PM

sale pending on another forum right now....will update this thread

VA72C10 · 02-21-2011, 04:03 AM

ttt...buyer on the other forum hasn't paid or responded to emails so these are still available as of now...

VA72C10 · 02-22-2011, 04:31 PM

local interest but still available....

VA72C10 · 02-26-2011, 12:30 AM

ttt

VA72C10 · 03-10-2011, 08:45 PM

ttt....price reduced another $25

esosa67 · 03-11-2011, 10:17 AM

man if only this was a 5 lug setup...

VA72C10 · 03-12-2011, 09:55 AM

Quote:

Originally Posted by esosa67

man if only this was a 5 lug setup...

VA72C10 · 03-13-2011, 01:44 AM

ttt

VA72C10 · 03-13-2011, 04:46 PM

bump for a good deal

VA72C10 · 03-18-2011, 01:12 AM

still available....have someone waiting for funds to purchase but I am also waiting for funds to purchase things I need for my 72 super so first to say they will take it and send money gets it

VA72C10 · 03-18-2011, 01:13 AM

Actually, let's do a final price drop 600 picked up or 650 shipped in the CONUS!!!!!!

VA72C10 · 03-19-2011, 07:48 AM

:d

VA72C10 · 03-20-2011, 01:58 PM

ttt

VA72C10 · 03-21-2011, 11:48 PM

pending sale on C10 forum

VA72C10 · 04-05-2011, 02:29 PM

ttt

Custom 68 · 04-05-2011, 03:08 PM

so how big of a wheel do you need for these to fit...
if a person already has these "modular" spindles does it come with the bracket needed or do you have to get that also?
Thanks
Dave
oh I need bigger wheels.

Just re-read and seems like they do have the bracket.
thanks

VA72C10 · 04-05-2011, 03:18 PM

I believe it's 17" wheels but I'll check to see if I can verify that. 16's might work..

These come with the bracket. just need the spindles...

VA72C10 · 04-05-2011, 03:19 PM

I also have a bracket from CaptainFab available for the rear to run larger brakes back there in the 6X5.5 pattern complete with the list of parts for the rotors/calipers...

VA72C10 · 04-05-2011, 03:26 PM

From CPP's site it states they will fit larger 16" wheels that were designed to clear disc brakes...or larger of course...

01-27-2011, 12:16 AM	#1
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	CPP 13" Modular BIG Brake setup!!! Price reduced!!!! I got this setup from a CPP dealer who had mocked it up only. All new parts. 6 lug setup for our trucks (6 X 5.5) 13" BIG cross drilled and gas slotted rotors. I have the upgraded braided stainless brake lines (not pictured but new in plastic). Has the brackets. Comes with the black Large 2 piston Calipers that are loaded with brake pads. Hubs have been assembled for you . Will need one grease seal but otherwise ready to go on. Comes Without the spindles. Will need to use the specific CPP spindles (299) You can choose what year ball joints and if you go with stock or 2" modular drop spindle. The spindles are on backorder right now so don't plan on these if you're on a tight deadline. But this is a way to save a couple hundred dollars on new parts!!! The kits run 1148 plus shipping with the braided brake line upgrade. Subtract the 299 for the spindles and you're at 849. I am asking 600 FIRM plus shipping. Shipping will be a little over 50 in the CONUS and I will cover anything over so 650 SHIPPED!!! Save $250 when you figure in shipping!!! post here if interested. I accept paypal (if buyer pays fees) or postal money order. __________________ Looking for a 67-72 swb or blazer project in or around VA. Last edited by VA72C10; 03-18-2011 at 01:14 AM.

01-27-2011, 12:32 AM	#2
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: CPP 13" Modular BIG Brake setup!!! Here's a link to the CPP page they are on http://www.classicperform.com/6092chevtrk.htm Kit depends on ball joint/tie rods for spindle.... 6370SWBK65213 63-70 7172SWBK65213 71-72 7387SWBK65213 73-87 If you haven't purchased ball joints/tie rods I'd recommend going with the 73-87 when you buy them and the spindles as they are readily available at parts stores and cheaper __________________ Looking for a 67-72 swb or blazer project in or around VA.

01-29-2011, 12:12 AM	#3
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: CPP 13" Modular BIG Brake setup!!! Who wants BIG brakes? __________________ Looking for a 67-72 swb or blazer project in or around VA.

01-29-2011, 12:24 AM	#4
c10seconds Registered User Join Date: Oct 2009 Location: gilbert,AZ Posts: 947	Re: CPP 13" Modular BIG Brake setup!!! 67cheby NEEDS these! Posted via Mobile Device

02-01-2011, 04:03 PM	#7
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: CPP 13" Modular BIG Brake setup!!! sale pending on another forum right now....will update this thread __________________ Looking for a 67-72 swb or blazer project in or around VA.

02-21-2011, 04:03 AM	#8
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: CPP 13" Modular BIG Brake setup!!! ttt...buyer on the other forum hasn't paid or responded to emails so these are still available as of now... __________________ Looking for a 67-72 swb or blazer project in or around VA.

02-22-2011, 04:31 PM	#9
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: CPP 13" Modular BIG Brake setup!!! local interest but still available.... __________________ Looking for a 67-72 swb or blazer project in or around VA.

02-26-2011, 12:30 AM	#10
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: CPP 13" Modular BIG Brake setup!!! ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-10-2011, 08:45 PM	#11
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: CPP 13" Modular BIG Brake setup!!! ttt....price reduced another $25 __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-11-2011, 10:17 AM	#12
esosa67 Registered User Join Date: Feb 2011 Location: Houston, Texas Posts: 79	Re: CPP 13" Modular BIG Brake setup!!! man if only this was a 5 lug setup...

03-13-2011, 01:44 AM	#14
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: CPP 13" Modular BIG Brake setup!!! ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-13-2011, 04:46 PM	#15
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: CPP 13" Modular BIG Brake setup!!! bump for a good deal __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-18-2011, 01:12 AM	#16
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: CPP 13" Modular BIG Brake setup!!! still available....have someone waiting for funds to purchase but I am also waiting for funds to purchase things I need for my 72 super so first to say they will take it and send money gets it __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-18-2011, 01:13 AM	#17
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: CPP 13" Modular BIG Brake setup!!! Actually, let's do a final price drop 600 picked up or 650 shipped in the CONUS!!!!!! __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-19-2011, 07:48 AM	#18
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: CPP 13" Modular BIG Brake setup!!! :d __________________ Looking for a 67-72 swb or blazer project in or around VA.



Register or Log In To remove these advertisements.

03-20-2011, 01:58 PM	#19
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: CPP 13" Modular BIG Brake setup!!! ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-21-2011, 11:48 PM	#20
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: CPP 13" Modular BIG Brake setup!!! pending sale on C10 forum __________________ Looking for a 67-72 swb or blazer project in or around VA.

04-05-2011, 02:29 PM	#21
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: CPP 13" Modular BIG Brake setup!!! ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

04-05-2011, 03:08 PM	#22
Custom 68 Registered User Join Date: Nov 2001 Location: Springfield, MO Posts: 2,939	Re: CPP 13" Modular BIG Brake setup!!! so how big of a wheel do you need for these to fit... if a person already has these "modular" spindles does it come with the bracket needed or do you have to get that also? Thanks Dave oh I need bigger wheels. Just re-read and seems like they do have the bracket. thanks __________________ Dave 1968 Custom Chevy with turbo charged 5.3 gen III 4l80e swap 1967-71 GMC 3/4 ton long step 4x4 (not sure what year exactly?) "A good friend will bail you out of jail...but a true friend will be sitting next to you saying "that was frekin awesome". "If it doesn't fit force it...If it breaks then it needed to be replaced anyway!" Last edited by Custom 68; 04-05-2011 at 03:18 PM.

04-05-2011, 03:18 PM	#23
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: CPP 13" Modular BIG Brake setup!!! I believe it's 17" wheels but I'll check to see if I can verify that. 16's might work.. These come with the bracket. just need the spindles... __________________ Looking for a 67-72 swb or blazer project in or around VA.

04-05-2011, 03:19 PM	#24
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: CPP 13" Modular BIG Brake setup!!! I also have a bracket from CaptainFab available for the rear to run larger brakes back there in the 6X5.5 pattern complete with the list of parts for the rotors/calipers... __________________ Looking for a 67-72 swb or blazer project in or around VA.

04-05-2011, 03:26 PM	#25
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: CPP 13" Modular BIG Brake setup!!! From CPP's site it states they will fit larger 16" wheels that were designed to clear disc brakes...or larger of course... __________________ Looking for a 67-72 swb or blazer project in or around VA.

Register or Log In To remove these advertisements.