|
|
|
02-02-2011, 08:02 PM
|
#1 |
|
Registered User
 Join Date: Sep 2009
Location: menifee california
Posts: 788
|
my rear end
i know this has been asked before but i have a gmc and trying to figure rear end ratio. i thought maybe GMC guys would chime in--mark-- anyway i get three and a half turns on drive shaft with one revolution of wheel. any body have same ratio? thanks
|
|
|
|
02-02-2011, 08:11 PM
|
#2 |
|
SSN 706
Join Date: Mar 2009
Location: Pocatello Idaho
Posts: 3,821
|
Re: my rear end
there should be a code on top of the axle tube you can find out that way also.
|
|
|
|
|
02-02-2011, 08:27 PM
|
#3 |
|
"Where were you in '62?"
Join Date: Jul 2004
Location: Cleveland County, North Cackalacky
Posts: 5,013
|
Re: my rear end
There should be a tag on there showing the gear ratio. The rear ends have stamped ID's as well.
 Raise and support the rear of the truck with jack stands. Read the metal tag attached to one of the differential cover bolts. This tag, which is always present (if not removed by a previous owner), will indicate the gear ratio that came with the vehicle originally. This tag may not be valid if the previous owner has changed the ratio, and you will have to remove the cover to find the gear ratio. 1960-1966 Chevy/GMC Pickup Truck Specs & Engine/Trans/Axle ID's http://67-72chevytrucks.com/vboard/s....php?p=4359596
__________________
PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN  "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D. |
|
|
|
|
02-02-2011, 09:33 PM
|
#4 |
|
Registered User
Join Date: Sep 2009
Location: menifee california
Posts: 788
|
Re: my rear end
this is why i asked for the gmc guys this is a dana 44 no tags or stamps on axle tube. there are some stampings on the rear housing but i looked them up and they are patent # i do have a number on lower right flange of rear end that is 44-1
|
|
|
|
|
02-02-2011, 09:44 PM
|
#5 |
|
Registered User
Join Date: Mar 2008
Location: Tucson Arizona
Posts: 264
|
Re: my rear end
How I was taught to determine rear end ration is this..Jack up one wheel, mark pinon flange and then rotate the free wheel exactly two rotations while looking at and counting the pinon flange rotations...best done with two people. Divide one by the other to determine ratio...
Bob |
|
|
|
|
02-03-2011, 01:45 AM
|
#6 |
|
60-66 Nut
 Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: my rear end
The Dana 44's were available with 3.54 gears.......
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
 |
| Bookmarks |
|
|
Daverods 64 C10 Daily driver 292 3 speed "Driver" 
"Click it"
Hybrid Mode
