throttle linkage help! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sasquatch5308 · 02-05-2011, 05:03 PM

Can anyone send me a pic of the throttle linkage on their 250? Particularly where the pivot bolts up. Thanks in advance.
Posted via Mobile Device

sasquatch5308 · 02-05-2011, 10:32 PM

So I may have figured out the problem but still have no solution. I put a 66 250 in my 62. Where the throttle linkage comes through the firewall, my arm points down and the later trucks arm points up. Can I just get a pedal arm from a 66 and be done or is there something else I could do? The 250 needs a pulling arm where the truck has a pushing arm... any ideas? Anyone?
Posted via Mobile Device

02-05-2011, 05:03 PM	#1
sasquatch5308 Registered User Join Date: Jul 2009 Location: Battle Ground Washington Posts: 64	throttle linkage help! Can anyone send me a pic of the throttle linkage on their 250? Particularly where the pivot bolts up. Thanks in advance. Posted via Mobile Device __________________ safety third! 1962 swb 4x4 1952 Chevy "turd bucket" truck 1953 Buick special 1953 Famous James motorcycle 1975 Scout II

02-05-2011, 10:32 PM	#2
sasquatch5308 Registered User Join Date: Jul 2009 Location: Battle Ground Washington Posts: 64	Re: throttle linkage help! So I may have figured out the problem but still have no solution. I put a 66 250 in my 62. Where the throttle linkage comes through the firewall, my arm points down and the later trucks arm points up. Can I just get a pedal arm from a 66 and be done or is there something else I could do? The 250 needs a pulling arm where the truck has a pushing arm... any ideas? Anyone? Posted via Mobile Device __________________ safety third! 1962 swb 4x4 1952 Chevy "turd bucket" truck 1953 Buick special 1953 Famous James motorcycle 1975 Scout II



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.