show photos of your bench seats

[ffk]

thinking about going with a bench seat ,so i could take my wife and grandaughter for rides in the truck ...love to see all...if its not stock can you let me know what year and what it came out of...thanks

[cstm68]

mine, just had it done a few weeks ago
orange houndstooth

[cam.man67]

I call mine patina'ed



It's actually getting reupholstered today, so it will never again look like this.

[jondancer]

subscribed . . . .

[burkeens]

mine

[Ironhorse]

Not exactly a bench, aftermarket 40/20/40 seat. Bought it at a swap meet couple years ago and modified the brackets to fit existing bench seat floor mounting holes. VERY comfortable.
The ashtray has my home made red neck drink cup holder attached. Found another ashtray in a salvage yard, cleaned it up and rattle canned it for a close match.

[treveiger]

^^^how hard was it to do? i like the bench seat middle counsel where you can flip it up.

[Ironhorse]

Wasn't really all that hard, just took some trial and error attempts. I bought a set of bench seat rails/mounting brackets from a board member who was trashing a seat. Done some looking and measuring and then cut just the mount brackets that had the floor mount bolt holes in them. If I remember correctly I had to trim the bracket down from the original heighth to get the seat to "feel" right. Still think I need to trim it some more to lower it some. Sits good but think I could get some more adjustment backwards if I lowered the brackets. I moved my in-cab tank to under the bed so have quite a bit of room behind the seat for storage. Truck is sleeping in winter storage right now so will have to wait for warmer weather.

[magwakeenercew2jh]

My wife gave up a part of the guest room until I can get the cab wired and the doors back up to "speed"....I believe I was told that this bench seat came out of a "71 GMC. It's going into the '68 cab.

[Shyguy]

A bench seat out of a '92 GMC or Chevy will fit. My nephew put one in a '72 C-10, but had to drill some holes to bolt it down. He put some plates under the cab for strength.

[haplis]

you might try these guys they have quite a few that will look good in a 67-72. plus they have all the necessary hardware available.

http://www.discountvantruck.com/truc...canLowback.htm

[grs]

Not sure what year this seat is, or what make.

[SeatGuy]

Originally Posted by grs

Not sure what year this seat is, or what make.

seat came out of mid to late 90s F150...

[SBC]

heres mine covered in some nice brown leather. picked it up from a board member!

[ffk]

ttt

[BadaSs_Cal]

has anyone used the $150 covers off of ebay? I think its Rick Upholstery.. or something like that.

[ChevyLvr4Life]

Here's mine, original bench covered in cloth and vinyl...

[EA69TRK]

Here's my stocker from my '69 thats going back in it just has a few stitches popped on the driver side so I may redo it or just put a cover on it for now I haven't decided yet.

[Fldawg]

here it is

[RCbowtie69]

Here's a picture of mine

[Painter D]

Not a very good pic but you get the idea

[hayhauler71]

Do not remember the year but I dyed it black and was a take out of a new truck.

[SC C-10]

The seat is out of a 1988 Silverado. It sits lower than the stock seat because the bottom cushion slants toward the back, and it has no head rests so it fits below the back glass. It is very comfortable for three across, and the best part is I took it out of a boneyard truck for $28.00.

[n2billet]

Stock with a little bit of foam work.

[Zoomin]

∆
|
|
Sharp!