WHat did you get done 2/20/11 edition

[old Rusty C10]

I didnt get anything done truck related this week. Friday i was in a small accident that may have totalled my ranger and that may open up a whole new can of worms but at least me and the wife are ok and thats all that matters..
How about you all?

[BigRed76]

Friday I got the new 33's with 15"x8" ralleys mounted on the 76. Then Saturday I changed out the rear axle from 3.07's to 3.73's. Now I just gotta do the front axle soon.

Also watched a pretty exciting Daytona 500 this afternoon

[87 chevy silverado]

got 31s all the way around no and this
http://67-72chevytrucks.com/vboard/s...d.php?t=447957
and drove it

[Toxic Redline]

I worked on my dirtbike, getting her ready for the dunes and now i'll have to wait for a week til my next paycheck to do anything on my truck I hate being a full time student and my work only pays once a month!! O well i'm a senior so only a few month left, but i did add " putting the burbans gas tank between the rails" to the to do list

[Reziel_1983]

I primed my front driver's side fender only to realize that I had some oil on the fender and the paint didn't stick. So I Sanded it down only to find a whole bunch of deep marks so I sanded all the way to the bear metal... and reprimed it. I was incredibly frustrated. I think it's going to take a long time if this paint job is gonna look as good as I want it.

[Justins76]

Put a CS144 alt in my Firebird, fixed my gear indicator in the truck and put on a stainless steel tailgate protector.

[bagged74]

I picked up a new truck today. its an 89 crew cab short bed.

ill post some better pictures and more details when i have time to go over it and clean it up good and take some real pictures

[Toxic Redline]

Me likey

[flamingbig10]

Yesterday I got a few things done got some more rust cut out on the cab, also picked up some braided hose, new bolts for the fuel tank brackets and leaf spring clamps, and got the rear suspension back together with new custom made ubolts, center pins, and leaf spring bushings , today I went to the autorama with my dad didn't take any pics since there were no squares


I will paint the differential when I rebuilt it

[jitteryguy]

I got 42 chineese dirt bike's last week, got bout half of em thru the shop and ready for the team. got big shipment of part's sunday and spent most of the day sort'n them out and been add'd em to my invetntory list, they keep send'n me HMMWV part's, I cant convince em that the Navy dont use HMMWV's over here. I rebox'd em and will send em out to an Army unit. need to get these dirt bike's done so I can get the shop clean'd up again .
bout 64 more week's and I can go home !

[Toxic Redline]

HEy old rusty... was it your fault, not trying to be nosy... glad your both alright!!

[S10Fan]

Assembled the front suspension on the S-10 chassis I have for my '50 Chevy project. Threw together a quick steel jig so a me and a buddy (with an engine hoist) could set the cab on the frame. The cab is now situated on the frame at the correct location and height. The front cab mounts are ready for welding, still need to build some rear cab mounts. Of course I played around with fenders and bed sides to get a feel for how it will look. The running boards should be roughly an inch off the ground with the air dumped.

[D13]

Been sick on and off all weekend, but did manage to sort a few things in the shop, going thru all my stuff from my collection (35+ years). Got the first step of my waste motor oil processer set up (WMO as fuel for the diesel). Fired up the diesel and drove it around, now I got to get the broken crank pulley swapped. Then it snowed 2". Oh well.

[87 chevy silverado]

Originally Posted by bagged74

I picked up a new truck today. its an 89 crew cab short bed.

ill post some better pictures and more details when i have time to go over it and clean it up good and take some real pictures

beside that being 4 door and short thats the look im wanting for my truck

[triophan]

New 700r4 Corvette running my heap now!

And found out from my (way more knowledgeable) buddy that my truck's got a built 350 instead of an old tired one. I also can feel it now that all the power's transferring to the rear...
need to do some more de-greasing/diagnosing/tightening up then next week its on to the suspension

[ghettoluxury]

Sold the flat bed off the crew and picked up a 350 TBI with 20,000 for $200 and single wheel hubs and rotors for the 60 for $175.

[75ChevyGuy]

Tried my hand at fiberglassing this weekend. Put new plugs and wires in the 75, just waiting for my spark plug boot protectors now. Also went to look at a 95 Impala this weekend.

[silvereagle07]

I finally got around to ordering some parts for my truck...now I'm just waiting on the Defxe truck

[1tonchevy]

Didn't get anyhting done. waitng for parts in the mail and waiting for the snow to go away or for it to warm up

[85/05Silverado]

re mounted my aluminum rad and mounted a summit electric fan with aluminum shroud,
just got to wire it in. also give the interior a good cleaning, im stalled lmc low beams, and clear makers behind the grill, waiting for wheels and tires to come in then try and find some money to upgrade front brakes and lower it more before the snow melts which will probably be april/may

[foamypirate]

Drove to Sanger, TX to pickup a built TH350 and 2200 stall converter from Jakeshoe (Jake's Performance, awesome customer service, BTW) for my brother's 1970 C10 w/ 400SBC. It smoked the stock TH350, and the 200-4R we swapped in had no 2nd gear, so in goes a nice performance built TH350.

[thinair]

Finished the cab swap for my buddy. Truck also got a 3" body lift (still need to raise the tank) and an axle upgrade. Dana 44 with a locker and 5.13s and a 14 bolt with a limited and 5.13s...