|
|
|
02-24-2011, 08:27 PM
|
#1 |
|
Registered User
Join Date: Aug 2008
Location: Dexter, N.M.
Posts: 1,082
|
Need Help Quick......
Hey everyone. I got a bud that has a 84 swb 4x4 body and is puttin it on a 2wd frame. The frame has standard tranny and he wants it to be automatic. Okay the body is on the frame already. What all does he got to do to make it an automatic? Steering column, and what else. He doesnt want a shifter on the floor. Any help would be greatly appreciated.
__________________
Its Kool to be a square 2013 Chevy Silverado Z71 w/ 7" lift and 35" Nitto's 1985 C-10 ......My dream truck (under construction) 1984 k 10 Silverado...6" lift with 38.5 super swampers  New Mexico Member ---  Member of the Square Body Club--- 
|
|
|
|
02-24-2011, 08:44 PM
|
#2 |
|
Account Suspended
 Join Date: Apr 2009
Location: lexington South Carolina
Posts: 2,124
|
Re: Need Help Quick......
weld up the hole and get carpet and be done?
|
|
|
|
|
02-24-2011, 09:10 PM
|
#3 |
|
Registered User
Join Date: Jul 2010
Location: Niagara, Ontario
Posts: 87
|
Re: Need Help Quick......
So is the truck a 4x4? or the body just came from one? If it's 4wd you might need to make sure that the auto trans they pick up will mate up to the transfer case correctly(I think that the transmissions total length can vary depending on the vehicle they came from, or something to that effect). If it's a 2wd it should pretty much be a bolt up deal, hook up the linkage, modulator, and the dashboard gear indicator spring cable clip to the column, maybe make sure the driveshaft is the right length. Don't take my word as gospel though.
__________________
87 GMC V15 in profile photo sold 2013 99 Chev Silverado 2500 5.3 reg cab long bed |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
