|
03-03-2011, 11:32 PM
|
#1 |
|
Registered User
Join Date: Sep 2008
Location: sulphur springs texas
Posts: 141
|
Spool axle packages
I have a 10 bolt 8.5" in my 85 swb. Anyone know any spool and axle packages for 30 spline that fix this
Posted via Mobile Device
__________________
Shawn 85 SWB 7.39 @ 93 Best so far with 0 tuning Lesson in life: Never fry bacon naked! |
|
|
|
03-04-2011, 01:20 AM
|
#2 |
|
Mean Green
Join Date: Sep 2007
Location: Portland, OR
Posts: 522
|
Re: Spool axle packages
__________________
427 SBC 683HP & 590ftlbsTRQ @ fly wheel. 60'-1.38 1/4-10.43 MPH-124.6 New ET current 4/2019 AKA MEAN GREEN. |
|
|
|
|
03-04-2011, 09:09 PM
|
#3 | |
|
Registered User
Join Date: Feb 2001
Location: Wetumpka, Al, U.S.
Posts: 8,892
|
Re: Spool axle packages
Quote:
__________________
Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole! |
|
|
|
|
|
03-09-2011, 12:19 AM
|
#4 |
|
Registered User
Join Date: Jan 2009
Location: Glaslyn, Sask
Posts: 131
|
Re: Spool axle packages
I got mine from Moser. They even pressed the c-clip eliminators on to the axles
__________________
85 GMC toy Lowered, newer box swap, 350 .060 over with AFR 195s, forged pistons, TCI TH350 1.83 60' 13.14 @ 100 on motor 1.49 60' 11.52 @ 116 w/150 shot 1952 Chevy truck project 1980 Z28 Camaro 1967 Camaro drag car 10.60@126 |
|
|
|
|
03-09-2011, 07:43 PM
|
#5 |
|
Registered User
Join Date: Sep 2008
Location: sulphur springs texas
Posts: 141
|
Re: Spool axle packages
I knew about strange and mark williams and moser. I was told you could take a 30 spline posi for the 10 bolts and use 12 bolt axles in them... anyone heard of this?
__________________
Shawn 85 SWB 7.39 @ 93 Best so far with 0 tuning Lesson in life: Never fry bacon naked! |
|
|
|
|
03-13-2011, 06:17 AM
|
#6 | |
|
Account Suspended
Join Date: Dec 2008
Location: indisclosed
Posts: 1,515
|
Re: Spool axle packages
Quote:
i think so; Will try to find the link. |
|
|
|
|
|
03-14-2011, 02:50 PM
|
#7 |
|
Account Suspended
Join Date: Dec 2008
Location: indisclosed
Posts: 1,515
|
Re: Spool axle packages
Yes, i checked and it is possible. This is according to Randy's and they really know their stuff concerning rear ends.
12 bolt axle's c-clip button thickness is .312 inches, while the 10 bolt c-clip button thickness is .25 inches. So, if the 12 bolts buttons are machined/grinded down it will work. You would need a 30 spline carrier of course. Would a posi change the position of the axles to each other compared to an open rear? (how does this work, as i'm not real familiar with how axles are put into the assembly, but am learning); i'm not sure if the grinding would be nessesary if you use a spool---b/c you'd be using c-clip eliminators? 8.5 10 bolt 30 spline axles slide in with no modifications. |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
